I cannot download the IOS 5 with Itunes to update my iphone 4. I dont want to restore the iphone because I am afraid that the itunes cannot download the ios 5 and then I will be with no iphone.
I cannot download the IOS 5 with Itunes. Always appear this message ( err= -3259) what can I do to solve this problem?
It's a connection timeout error. Google for a copy of iOS 5.0.1 and download it to your computer. Prepare to restore your iPhone but hold down Option (Mac) or Shift (Windows) when clicking Restore to bring up an explorer where you can manually install iOS 5.0.1 on your device, since you do not require a full download from the Apple Servers other than to verify your iOS build being installed.
Similar Messages
-
When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi there, I have a 2008 iMac 24' 3.06 Intel Duo with 4gb ram. And yesterday it was working totally fine and jolly with no issues. Then I noticed there was an OS X update for Mavericks, so I finally decided to do it, and once it was rebooted it went to like the grey screen and I could move my mouse, just nothing else was there. So I tried to restart it, and then it booted up, but was really laggy, and so I decided to restart it and try again, this time the iMac froze at the login. So I decided to take it apart, pull the 500gb hard drive, connect it to my MacBook Pro, and then formatted it in Disc Utility. From there, I opened the Mavericks installer on my MacBook and then installed it to the iMac's hard drive via usb hard drive enclosement. And once the install of Mavericks was completed, I put the hard drive back into the iMac and tried to boot it. It now boots up to the white screen with the Apple and the loading circle underneath the Apple and then it freezes and doesn't go any further. So then once that happened, I turned it off and tried to boot it into recovery mode. Then it freezes on the screen with the Apple and loading circle below it. Then out of desperation, tried to use a bootable disc of Mavericks to see if i can at least get the iMac to boot up again, with no success. It froze at the same point again. So now I reach out to the Apple Community to see if anyone else has an idea on what I can do or if anyone had this issue and what they did to resolve it. Any help would be great. Thanks.
mddcfilms and Pat75, I'm having precisely this same issue -- no booting but spinning and freezing gear under the Apple logo. Have either of you come to a resolution? Here are my details:
iMac, Early 2008, 24”, 3.06 GHz, 4GB
September 2013: Nvidia GeForce 8800 GS GPU repaired, HDD replaced with Western Digital 2TB
21 April 2014: Erased HDD with Disk Utility on Mavericks USB; clean installation of Mavericks from the USB. Process completed without issue, including registration process. After a minute or two of poking around, machine shut down immediately (not through the shut-down process).
Since then it will not boot up. Grey screen and Apple logo appear, with gear spinning; the gear freezes, then the machine tries to boot up again. Occasionally I’ll hear “To use English for the main language, press the return key.”
I’ve tried booting into Safe Mode; same gear freeze and restart.
I’ve tried booting to the 10.9 Recovery disk; same gear freeze and restart.
Tried booting from Mavericks USB; same freeze and restart.
Tried booting from 10.6.3 DVD; same freeze and restart.
Ran Apple Service Toolkit (at Stormfront in the UK), which turned up nothing in error.
Started in single-user mode to test HDD and RAM, which are fine.
Started in verbose mode to check logs; some error messages but nothing seems crucial. After the log screen, the grey screen and Apple logo appear, gear spins, and then freeze.
Cannot get to Apple Hardware Test (vintage machine too old?)
Cannot get to Target Disk Mode with my MacBook Pro
Ideas: Potential booting flaw in Mavericks installation. Firmware incompatibility with Mavericks. Hardware issue in Nvidia GPU (known for problems). At the moment I'm hoping that it's a Mavericks installation or firmware issue, though I suspect the Nvidia GPU has blown up on me. These graphics cards are known for being pieces of junk, so I may try installing the lower spec ATI Radeon 2600 GPU if I can find one at a reasonable price.
Anybody else have precisely these problems or have any advice? -
How to show the first page and then rest will be created in background
Dear Friends,
I am suffering from some seriouse issue of slow opening of report....
I am using vs2005 and asp.net 2.0 and crXI R2 sp4,
using oledb for getting data from ms sql server 2005.
Now my one report called accounts ledger
when i execute the report query it takes 1.03 mins for 515000 records..no issue with it ,
when i execute the report from report desginer for 515000 records its taking 26 mins . It is generating all
32000 pages.
Now same report i run from my web based erp application it takes 30mins to execute 32000 pages now
this is too much time it is taking and now our client is fedup of ussss..
So is there any way that we can show First page at the earliest and rest of the pages willl be getting created in background? is it possible ?
We have to give them the solution as sson as possible...
can anyone suggest the diff ways to get out of this problem .......
Please ur co operation will be appriciated....
thanskHi Mithun,
Here are a few points related to performance issue. These might be helpful.
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards,
Shweta -
My music on itunes doesn't have the markers anymore, how can i fix this?
So my songs should be listed like this:
A
Advice
B
Bang
C
Chinter's will
K
KannaZuki No Miko
L
LightsThe reason the alphabetical sections aren't showing is because you don't have enough songs. In order for them to show, you have to have a certain number of songs. ( I think it's 40 ).
-
ipod Touch 5th generation. I changed the original passcode and then forgot, so it says 'iPod is disabled'. It hadn't been synced with iTunes, so I switched it off, held home button, connected to Mac, did restore on iTunes twice but it doesn't work. Help!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time' I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working
i have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working, i got an error message
This device is not registered as part of the iPhone developer proraom . ##br####br## if yuo are member of the program.,please register your device in ..you can update over the air with strong wireless signal, or by connecting to a computer running iTunes. Either works well. If you do the update over the air, be sure and attach your iPhone to a wall outlet so you have a solid power supply and don't risk the battery dying during the update.
The iTunes approach installs a much larger file because of the connection, but if you have not updated since 5.1 that might be a better approach...replace the entire operating system instead of patching.
Either way, backup the iPhone yourself just for your own protection in the off-chance something should go wrong...a little paranoia while updating is a good thing -
I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/ -
I have updated my iphone 4 with iOS 6, but now i am unable to transfer my music videos to iphone.I cant add a music video to itunes using 'add file to library' and then transfer it to my iphone. Am using itunes 10.7.
You need to update iTunes to 11.1 on your PC
-
I have an iPad (original). I cannot complete the update to iOS 5. It gets to the "backup" stage and then finds an error (-402653081). It asks if I want to continue, with a warning that "continuing will result in the loss of all contents on this iPad." What can I do?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?
Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a very common problem. Any help would be appreciated. Thanks.
Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-
I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom
Maybe you are looking for
-
User exit or badi for the iw32 for the subnetwrk/portn
Hi All, I got one requirement in PM Module, after making the changes in the PM work order using the transaction code IW 32 and clicking on u201CSAVEu201D button, then we need to fetch the u201CSettlement Receiveru201D values from Settlement Rule rela
-
Dear Gurus/Masters/All, I request your valuble assistance in tuning one of my SQL. We are using oracle 10.2.04 version and OS is HP-UX 11.23(ia64) version In my production environment one SQL is taking more time to complete the task. According to EXP
-
How to pick Customer Details in Purchase Order like Address, TIN No, CST No.............., ETC.
-
Why can't I print and be one the phone at the same time?
Please help,
-
The forums are in german. I have no idea why, I can't fix it. Help please. The button on the top right dosen't work. Solved! Go to Solution.