I cannot edit project in project server after editing it in project professional

Hi
i cannot edit project in project server 2013 after editing it in project professional.
i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
hidden!!
it happens even if I start a project with project professional.
I'm the admin user.
what's the problem?
Thanks.

CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
here.
Can you try to reproduce the bug with
IE in compatibility mode?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

  • Still cannot print via Moto Print Server after 10.4.3

    I just sent this message to Apple via their Feedback page:
    I have an older HP 5MP laser printer which is very reliable and has plenty of usefull life left. It has a parallel port and an Apple port. The new G5 tower I bought does not accept either of the printer's connections. I installed a very useful Motorola SBG1000 Internet Gateway device that includes a cable modem, ethernet router, wireless router and a printer server which allows me to continue to use the HP 5MP.
    When I got the G5 all I had to do to use the print server was to plug it in and empower it using a browser page which access the controls of the SBG1000. When I would print from any application, the printer dialog box would refer to the SBG1000 as the printer name.
    When I installed the latest update to 10.4.3 I cannot print to the HP at all. In Classic Mode, the Chooser can see the SBG via Appletalk but I can't figure out how to empower it from within Tiger.
    I also have an epson PhotoStylus printer attached to the G5 by USB. It works fine and I can control it from the desktop printer application. However I still have many text only, black and white documents that should be printed on the HP 5MP.
    What can I do to get this working again?
    Thank you!

    Problem resolved!
    The Help Desk at Motorola assisted me to reinitiate the AppleTalk definitions using the browser-based interface with the SBG1000 gateway. All I had to do was to follow the add a printer steps and I was back in business!
    Unfortunately, the next day I had a major hard-drive failure so now I am hosed again for a while. My G5 is in the shop to see if they can recover the drive's data.
    I usually spend the day after Thanksgiving doing back ups and system maintenance but I couldn't get it to boot up.
    Tried zapping PRAM, reset the memory management unit, reset firmware and ran the Disk Repair utility 4 times. Bummer.

  • Cannot re-connect to SL Server after upgrade to Lion

    Hi all,
    I faced a problem yesterday and I'm not sure what the reason could be.
    First:
    I have a Mini running SL Server for some time, all Open Directory users have mobile profiles.
    For testing purposes I disconnected my MBA from the OD on the server, removed all mobile users except the local admin, and started the Lion upgrade.
    After the successful (seemless!) upgrade I wanted to re-connect to the SL Server's OD.
    That's were I'm stuck: I always get something like "Cannot connect to xxxxx. Error: -2100" (free translation from the german message)
    Any idea what I was doing wrong?
    Thanks in advance

    After doing a lion server upgrade, i cannot logon to the server.app. asking me for administrator password but everything i type will not let me in.
    Has the upgrade messed with security settings ?
    Note: I can logon to the server direct ok, but i see this problem when clicking on the server app under applications

  • Cannot connected with google exchange server after iphone replacement

    Today I replaced my iPhone 5 because of some issues, but after I restored my iPhone I found that the iPhone could not connect to the google exchange server. The alert "Cannot get mail - the connection to the server failed" will be shown.
    I am 100% sure the setting is correct & work. It is because I have been used this setting many many years and this is 100% work fine on my iPad 2, 6.1.2 (same version). I have tried to delete my account re-add the account many many times reboot and reboot airmode etc, I could use the simple Gmail one but I really need Exchange service.
    Please help, it really make me crazy

    My understanding is that as of Jan 30th Google no longer supports Exchange for free Gmail accounts (see http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/).

  • Cannot start Infra and App Server after reboot

    I have installed iAS 10.1.2.0.2. on Solaris 2.9 -infra and appserver on same box. After installation I was able to configure Discoverer etc. The machine was rebooted recently and I cannot get the infrastructure and app server to start. opmnctl startall just hangs.

    I think borkur is probably right.
    We have our midtiers on different machines from the infra, but nonetheless, you could use the same sort of startup script.
    What I do is go into a wget wait loop on the mid-tiers before trying to opmnctl start them:
    #! /bin/bash
    # script waitfordas
    DAS_RESPONDING=`wget -q -O - http://infra.mycompany.com:7777/oiddas > /dev/null; echo $?`
    echo Waiting for DAS to be up on infra.mycompany.com...
    while [ "$DAS_RESPONDING" -eq 1 ]
    do
    sleep 10
    echo Waiting for DAS to be up on infra.mycompany.com...
    DAS_RESPONDING=`wget -q -O - http://infra.mycompany.com:7777/oiddas > /dev/null; echo $?`
    done
    echo DAS responded.
    Then I call this in my startup script:
    #! /bin/bash
    # oracleas Start/Stop the Oracle Application Server
    # chkconfig: 2345 99 10
    # description: Starts and stops the Oracle Application Server
    exec 2>/tmp/oracleas.err 1>/tmp/oracleas.log
    # Source function library.
    # . /etc/init.d/functions
    RETVAL=0
    ORA_OWNER="oracle"
    ORA_HOME="/opt/oracle/product/as904mid"
    EM_HOME="/opt/oracle/product/agent"
    # See how we were called.
    prog="oracleas"
    start() {
    echo -n $"Starting $prog: "
    su - $ORA_OWNER -c "/home/$ORA_OWNER/bin/waitfordas"
    su - $ORA_OWNER -c "$ORA_HOME/opmn/bin/opmnctl startall"
    RETVAL=$?
    su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start iasconsole"
    su - $ORA_OWNER -c "$ORA_HOME/dcm/bin/dcmctl start"
    su - $ORA_OWNER -c "$EM_HOME/bin/emctl start agent"
    return $RETVAL
    stop() {
    echo -n $"Stopping $prog: "
    su - $ORA_OWNER -c "$ORA_HOME/opmn/bin/opmnctl stopall"
    RETVAL=$?
    su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop iasconsole"
    su - $ORA_OWNER -c "$EM_HOME/bin/emctl stop agent"
    return $RETVAL
    restart() {
    stop
    start &
    case "$1" in
    start)
    start &
    stop)
    stop
    restart)
    restart
    echo $"Usage: $0 {start|stop|restart}"
    exit 1
    esac
    exit $?

  • Cannot download mail from the server after a particular date

    Hi, I just set up my pop3 account on the Iphone. That was easy
    I started downloading the mails. It download all the mails till Wednesday morning and then just stopped. Since then I've tried to re-install the email account, download the mails again, reboot the handset but nothing seems to work. Each time it only downloads the mails till Wednesday morning and stops there.
    My Gmail account on the other hand works fine and is up to date with the email notifications.
    Any advise on how to go about this?
    -B

    Most POP3 clients delete messages from the server on download.  Are you positive you don't have another mail client set up somewhere (on your home or work computer) that may have already pulled them down and deleted them from the server?

  • My iPad cannot connect to the activation server- after research it may have something to do with the sim card but mine has no tray,

    any suggestions on how to reactivate my ipad2

    My guess is that your router is not handling DNS forwarding correctly.
    Can you do an IPCONFIG /ALL from a command prompt and post the response?
    Also, go into PowerShell and enter the following:
    Get-ItemProperty -path hklm:\system\CurrentControlSet\services\dns\parameters
    Post the response.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Cannot open a single project after disabling support for project professional 2007

    We use SharePoint/Project Server 2010.  I have a single project on the Project Server (PS) that fails to open in Project Professional (PP). The project is editable in PWA, but PP closes it as soon as it opens it (ie that's what the status window is
    displaying, I basically get a blank screen in PP after "opening" the project, and when closing it does not have anything to save/check in). The only recent change I made was disable PP 2007 support.  I reviewed several posts so here are
    some thoughts: I am currently not using backups, so cannot restore, the server name is already in the trusted list.  Any way to retrieve this project from the server (or directly from DB)?

    Hi Wwodzien,
    It might be because of duplicate RES_OPTINDX values. Please install following KB and check the behaviour.
    http://support.microsoft.com/kb/2687386/en-us
    Note:- I would suggest you to test this in a test environment first.
    Happy troubleshooting....
    Vikram Daruru - MSFT

  • After Migrating to project server 2013 some of my Mpp are not opening in project professional

    After migrating to project server 2013 from 2010. my some of mpp are not opening in project professional. 
    project professional taking some time and then showing checkin error. There are no logs on project server to this issue.
    but you can see these project in project server 2013 without issue. I have also tried the EditLink function. but result is same project professional not able to open. Check in error.

    Hello,
    Can you try this:
    Open one of those Projects in PWA to edit in the browser
    make a slight change (new dummy task etc.)
    Save and Publish from the web
    Close and check in from the web
    Wait for the jobs to complete
    Open project professional
    try and open the same project again from there
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Unable to open/edit project in project professional form PWA(project server 2010)

    i have been working perfectly and opening my projects with project professional from PWA
    All of a sudden,i get this error: no permission to read enterprise global file when trying to edit my projects in project professional from the PWA
    i have also tried opening the project from project professional directly and it says (you do not have sufficient permissions to  perform the requested action)
    please what is the cause of this issue and what can i do to resolve it?

    Hello kehinde,
    The cause of this problem is somebody changed something.
    To resolve, I would clear out the cache to see if that resolves anything.
    Then, I would reboot system and see if that resolves.
    If still no go, then I would look into security settings, and start doing some detective work.  I keep a version of project server in a separate instance, that is completely out of the box, so I can have a reference point for settings.
    If still not solution, then I would resave the global file settings.
    Cheers!
    Michael 
    Michael Wharton, MBA, PMP, MCT, MCSD, MCSE+I, MCDBA
    www.WhartonComputer.com

  • Project Server 2013 - Cannot see project schedule in PWA

    Project Server 2013 and Project Pro 2013
    I have admin authority but for some of the projects loaded to the server, and published, i cannot see the Schedule option in the left frame. At least on project has this option available but several others do not. For the projects where I can't see the schedules:
    - Some of these projects were created with imported MPP files from Project 2010, and imported using the wizard,
    - Some were created with imported XML files from Project 2010, and imported using the wizard
    - Some were created with Project Pro 2013 and saved, published to the P13 server.
    Are there some obvious things that I should check as a new admin to this version of Project Server? I'm stumped.
    For all of the above projects (with the issue or not) I can succesfully see everything in Project Professional 2013, and everything seems to function normally in the publish process.

    Hi,
    the first thing to check would be the EPT (Enterprise Project Type) of those projects. Go to server settings, Enterprise Project Types, select the appropriate project type and ensure that the Schedule page is on the left side of the section "New Project
    Page/Project Detail Pages".
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, MCP |

  • I cannot edit pictures in my iphotos.  I am able to start new projects but my calenders and books that I was working on are frozen.  Any ideas on how to fix? I spent a lot of time working on these. Thanks

    I cannot edit pictures in my iphotos.  I am able to start new projects but my calenders and books that I was working on are frozen.  Any ideas on how to fix? I spent a lot of time working on these. Thanks

    Any work you do in Lightroom is in the catalog. It is impossible to use Lightroom without a catalog.
    In addition, your photos are filed in a specific location, which is determined when you import the photos (this may be a location you have specified or it may be the default location chosen by Lightroom).
    So ... unless you specifically choose to delete your photos, your photos have not been deleted. To find them, open Lightroom and select File->Open Recent and select each catalog shown there until you find the one with your 170 photos.
    And now ... a word to the wise: as gvb279 and Keith said, you absolutely need to stop doing whatever it is you are doing and learn the basics of Lightroom. You are clearly in need of such basic understanding. In addition to the links given above, there are many valuable instructional tutorials here: Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
    Please do yourself a favor and start learning

  • Getting the error 'The project cannot be written to the server'

    Hello All,
    While saving a project in Project Server 2013 I am getting the error 'The project cannot be written to the server' and its happening only sometimes. But certainly like to remove this error forever on this. Plese
    advice.
    Regards

    Hi Shanila,
    Apparently more people are having this problem. Please check following post for a workaround.
    http://social.technet.microsoft.com/Forums/projectserver/en-US/9789c1f7-4b66-466e-b32f-5e1f7b1b8f99/the-project-cannot-be-written-to-the-server?forum=projectserver2010general
    Hope this helps

  • Cannot change project hierarchy after budgeting

    Can any one please help with this.  I am trying to change the hierarchy of my project but since the project has been budgeted for and released, I get the message that I cannot change project hierarchy.  I have tried reseting the budget but this doesn't seem to be working.  Any ideas on how I can accomplish this?

    You can try the following procedures:
    1. Clear all the budget into 0 ( both overall budget and annual budget)
    2. Run t-code OPSX to reset the "BUDG" flag.
    3. Try to update your project hierarchy again.
    Hope it works.
    Atom

  • Project server 2013----new custom field value is not synced between my work assignment view and project professional

    Hi All,
    I would like to add a new custom enterprise field in project server to caculate the effective work. I hope it can work as the default field "work" and "overtime work". And I add my custome enterprise field to my work assignment and the
    related details view. User can update the values in "my task" but after PM accept the updates, these values are not synced to the project center as well as project professional. Any idea?
    Regards,
    Anna

    Yes, I am saying that the PM cannot see the updated values in the enterprise project in Microsoft Project 2013. It is a task custom field. No errors for it. Would you please help create a task custom field on your side to see whether you can reproduce
    this issue? After creating the field, please add it to the "My task" related views so that project members can update the value for the task when they update the task information under "my tasK" page. After that, open the project plan as
    project manager to see whether you get the updated value. Thanks a lot!
    Regards,
    Anna

Maybe you are looking for