I cannot enter my iTouch as it is locked with a password. However, I have forgotten the password! Can anybody advise? The product is not supported by apple support. Thank you.
I cannot enter my iPod Touch as it is locked with a previously set password which I can't now remember. Can anyone advise how I resolve this as my Ipod Touch is now unuseable Many thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????
Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
Restore: Tunes cannot connect my phone because it is locked with a passcode
My iPhone is telling me that a restore is needed and to connect it to iTunes. When I connect it to iTunes I get a message that iTunes cannot connect my phone because it is locked with a passcode. I know the passcode but my phone does notgive me the option to enter the passcode to unlock. Is there a way I can do that from iTunes? Anyother ideas?
Normally you will only get that message if the computer your are using is not the last one you backed up to. Your only solution is to restore using Recovery mode. See: http://support.apple.com/kb/HT1808
-
I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?
I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message. -
I have forgotten my password, how I can enter and generate a new one
I have forgotten my password,how I can enter and generate a new one
Try here.
http://support.apple.com/kb/HE36?viewlocale=en_US&locale=en_US -
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My cousin's iphone gave it to me but the bad thing is, it has a icloud and i can't access the phone. my cousin is involved to a motorcycle accident and he got a amnesia so he didn't remember anything to this phone. I entered the password so many times so that i can't activate the icloud account. Please, I need to access this phone immediately for emergency purposes. You are my only hope. The phone model is a1429 Verizon (Factory Unlocked). P.S apology for my bad English.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
jennfromla wrote:
... I have never plugged it into a computer...
Note:
All Data will be lost -
Help!!!!!! OS X wants to use the "local items" keychain. Please enter password. I have tried every password that I know of. Nothing works! I haven't even set up a password for this
-
I bought a mac book pro in the UK and I now live in another country which is not supported by apple support. I want to contact apple support but I cannot find any telephone number or email to do so. any ideas?
http://support.apple.com/kb/HE57
And here:
http://support.apple.com/kb/HT1434 -
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?
Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
Ken -
I have forgotten my password, therefore cannot access any email that you will send there, to enable me recover and update my apple stores.
Therefore kindly help me out.
Thank you
<E-mail Edited by Host>We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email address from your post.
If you've forgotten the password to your iTunes account then does this page help you get access to it : http://iforgot.apple.com
If you don't have access to your email account that reset info is sent to then you will need to contact iTunes Support / Apple to get your iTunes account password reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 -
Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.
After I sign on with email address and password, I am also asked to enter a serial number which I was not given...Hello,
In order to activate the product should get the following option:-
- Use trial or subscription
- I have a serial number
Please select the option - Use trial or subscription and click next- Restart Acrobat and sign in with your Adobe ID
Also, you may refer to the following for more information on activation issues:- Activation & Deactivation Help
Regards,
Nakul -
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device. -
Why I cannot enter an "Activity Type" for a trip with only one destination?
Hello experts,
Doing a travel expense the user must specify the type of activity (u201CAu201D, u201COu201D or u201CSu201D) that the trip expense is involved, but this option itu2019s only available when the trip has more than one destination (inside the table u201CAdditional Destinationsu201D):
[Screen Shot # 1|http://img145.imageshack.us/img145/1789/acttype.jpg]
[Screen Shot # 2|http://img404.imageshack.us/img404/8812/ptk05.jpg]
When I make a travel expense report, the field activity does not
appear, only on additional destination. Why cannot I enter an activity
type for the first destination, only for additional destination?
I think that the system should allow to enter an activity on general
trip data.
Thanks on advance
Edited by: Luiz Victor Santos on Apr 20, 2010 10:55 PMHi,
Sorry I gave you the customizing entry for transaction PR05 and not for TRIP.
So, go there :
Tx FITVFELD.
--> Your Trip Provision Variant. --> Trip Schema --> Travel Manager (Travel Expenses Only) --> General Trip Data --> Trip Itinerary
The Field "Trip Activity Type - PTK05_N-KZTKT " should have the parameters "Field Is Visible" and "Field ready for input" checked.
As you can see, the entry point is in "Trip itinerary" Subscreen and not in "General Trip Data Subscreen".
This means that unfortunately the Trip Activity Type is not available in the subscreen General Trip Data.
If I do like this in my test system, in the TRIP tx I can see that the field Activity Type appears also in the subscreen "Mileage and Per Diem Reimbursement". So If I enter my activity type here, then it populates the value in my first destination (in Trip Itinerary) even if I have only one destination.
Hope this help ;o)
Regards,
Christophe
Maybe you are looking for
-
Need MDX query to find something like date diff and Date Range for last 10 days
Hi , I need two Query .First Query for below; I have below data in table like. Cat StartDate EndDate A 2000-01-01 2000-01-15 B 2000-01-02 2000-01-30 C 2000-01-01 2000-01-31 D 2000-02-01 2000-02-28
-
Is it possible to delete the table of contents in a pdf but keep the bookmarks?
Is it possible to delete the table of contents in a pdf but keep the bookmarks?
-
Error message when trying to install the latest ios7 update
Itunes started to install the latest update for ios7 on my iphone4...then i got an error message and it stopped the update. Now my phone is stuck in the update mode (black screen w. white apple icon w. line underneath) but it isn't connected to itun
-
DEAR EXPERTS, TABLE_A WITH 25000 REC TABLE_B WITH 300000 REC THE SELECT STATEMENT USED IN VIEW AND DATASET WILL RETURN 25000 X 2300 ie. one RESULT SET IS TABLE_A WILL GET 2300 MATCHING ROWS IN TABLE_B I NEED TOP 100 REC FROM EACH RESULTSET FROM 25000
-
Relation between Pricing procedure &Tax Proc , how the whole procedure work
Hi Gurus, I need want to know in detail , How a pricing Procedure is linked to the FI Tax procedure and how the whole mechanism work . Pls clarify and explain me the whole process , As i have seen that the Tax condition type we maintain in pricing ,