I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

Similar Messages

  • Can someone explain to me how to correct this problem??

    I first want to thank anyone who reads my post and responds to it.. These boards have taught me so much over the years... My G4 450 or what I call my plow horse has
    recently started to run slowly especially while i tried to surf the web.. I decided to run Disk First Aid While it was running a highlighted Invalid B Tree Header,O,O, appeared then Highlighted was Mount check found minor errors. then it continues for a few seconds and I get message cannot continue an internal error has occured. I re ran the First Aid several more times but same messages each time. Can I fix these problems or is it time to put my Mare out to pasture...:( Thanks in advance for your answers........

    Hi, Colleen -
    I followed your directions and looked up the Boot Rom version it read $0004,28f1
    That indicates your G4 is at firmware version 4.2.8, which is the most recent version for it - there is no further update, so your machine is OSX-ready.
    I typed this in appleworks and when i went to save the message i get an error message so I tried again it would not let me save my notes. I wrote it down turnred my mac off and my daughter got on it a few hours later and calls me because at start up it goes through the usual functions but then on my screen its the Extensions manager.. This has never happened.
    There is a startup keyboard command which will call up Extensions Manager before extensions start to load - this allows altering the current set of extensions during startup, which can be quite useful when trouble-shooting. The startup command which does that is to hold down the Spacebar from the beginning of startup. Since Extensions Manager apparently was called up during startup, it would indicate that either the Spacebar is stuck down occasionally, or something was resting on the Spacebar when your daughter started it up (the corner of an open book has been known to be sufficient to do that).
    There is also the possibility of something else causing Extensions Manager to open - this would be the case if it appears after the desktop has loaded. Causes for that include having an alias to Extensions Manager in the Startup Items folder.
    Everything listed is xed the first in list Airport AP is highlighted I know my computer did not have airport card when i bought it...
    Everything will be checkmarked if the "On/Off" column header (the label box above the checkboxes) is clicked - it's a toggle. If that was done, the only way to undo it is to de-select (uncheck) individual items.
    ...so I highlighted start up icon on list.
    That will do nothing - control panels (such as Startup Disk) can not be engaged (opened) from within Extensions Manager.
    Will this problem be corrected by Disk Warrior also? If so will i still need to buy the Disk no newer then 2.1.1.
    Until the damage reported has been fixed, odd things may start happening - the longer you wait, the less stable the OS will be.
    Since your firmware has been updated to 4.2.8, it is okay to use the current version of DiskWarrior, one which boots to OSX.

  • I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

  • I recently sold my old iPhone to someone. Now everything I text on my new iPhone is also showing on the phone I sold. Can someone instruct me on how to control this? I'm confused.

    My son recently sold my old iPhone to someone. Now everything He texts on his new iPhone is also showing on the phone he sold. Can someone instruct me on how to control this? I'm confused.

    Why was the phone not erased prior to selling it?
    Change the password to the Apple ID account that's used for iMessage on both devices.

  • Can someone explain to me how to use Xcode?

    I just got the app Xcode and I am so exited to use it. But once I tried it, I was so confused. Can someone explain to me how to use Xcode?

    Become a paid developer, download all the thousands of manual pages and read them.
    developer.apple.com

  • Can someone please tell me how to fix this?

    Something is wrong with my internet like everything is white and is in columns
    http://i1015.photobucket.com/albums/af272/FlipGlaze/sadf.jpg
    Can someone please tell me how to fix this?
    This is happening with almost everywebsite I didnt do anything to settings and it just appeared.

    Your phone is not charging you. I think you may want to go and change your password on your apple id as it might be comprimised. Also talk to apple about any erronious charges.

  • When i import my pictures into lightroom, they are blurry,  when i click develop they automatically

    when i import my pictures into lightroom, they are blurry,  when i click develop they automatically focus, but when i click library, they blur again...  i use canon and jpeg, why is this and how do i fix it?

    Yes,   in library ive zoomed into 1:1 and the image is nice and sharp, but when i zoomed out, the sharpness disapears and the image is blurry again.  I see a lot of people are having this problem. I also called adobe and talked to someone and they had no idea whats going on,

  • HT204053 I recently purchased Pages for my MAC notebook and I would like to put it on my new IPad.  Can someone please tell me how to do this?

    Can someone please tell me how to get the "Pages" Ap that I recently downloaded to my MacBook Pro downloaded on my new IPad?  I have done everything I have read about but it does not seem to work.  Do I have to buy a seperate ap for my iPad?
    Thanks!

    You would have to buy Pages for your ipad from the App store.
    The program you bought is for your Mac.  it does not work on your ipad.  They are completely different platforms.

  • Can someone explain 'Sync' and how it sends mail

    I've lost a lot of emails
    Heres the scenario.  Between the hours of 9pm and 4pm (work days) I disable Sync and Email Sync. So lets start with MSN (others)
    Its 9pm, I launch MSN (others) email application, I hit refresh one last time, then I go into settings, account settings etc etc and uncheck the box that says 'Sync Email'
    Next since I have a google account I also go into settings and uncheck the box that says 'sync email'
    Then so I can get the full battery life possible I pull down my notification menu and select all and uncheck the radio button that says 'Sync'...and that lasts from 9pm as I sleep...and my work shift is like 7am to 4pm (ish) and then I will re enable it all.
    Now lets say at 10am I'm going thru twitter and theres an article thats a long one and I want to read it when I get off work....I hold down the tweet and see an option that says "Share", I select Gmail because I prefer reading it off of MSN (my choice!) anyways, I can go thru and select a lot of stuff and share it, by sending an email.
    Now heres the thing....I know if I were to launch my MSN Mail at 10:05am I wont get it, duh! because I have Sync off right? So once I enable each of the emails' Sync Option and enabling the Device' Sync option....I then will receive the email or emails...which I do...every single time and by everytime I mean 10 emails sent by me, per day (ish) every day for over a month.
    Now....heres my problem
    I was viewing web pages...I chose Share....I chose send via MSN to GMail (odd I know)...but prior to enabling Sync I actually performed a Factory Reset on Device/Phone...so it was like a brand new phone...
    However once I enabled Sync and refreshed a few times I havent received the emails nor am I finding it in the "drafts or sent folders"
    So I ask....what is the proper steps my phone is taking that somehow sends these "ghost emails"
    Heres my theory: I mean lets say I view a webpage; all sync's are disabled; I choose 'Share to this email address'...does my phone create a file on Devices Memory and its called "sendemail1togmail.mail" and if I choose to share another webpage it creates another file called "sendemail2togmail.mail" meanwhile those are temp files...kinda like temporary files when you are downloading a file off a webpage. (aka Partial)....then when you enable Sync on all of them...it searches for any .mail files off the device and thus sends it appropriately??????
    If so; great where do the files get saved to? Because next time I'm either keeping sync on or I'll just copy the files to my SD card then I'll copy it back again
    Because either way...I dont have the emails I sent
    Thanks

    sync doesn't send emails, only synchronizes between pc & phone.
    yours is the goofiest way of syncing i've heard of.
    i sync 4 email acc'ts, 2 are pop3, yahoo & gmail & they all work as you'd expect.

  • Alright, can someone explain to me how to re-download Adobe Photoshop?

    I was given a wacom tablet, and an adobe photoshop back in 2007. I adored it. That computer crashed, and I figured out how to redownload it on my laptop... that has, since then, also broken. I was looking into how to redownload it once again onto my new computer.
    I can find my serial number. I have my sign in information. It even notices that I have Photoshop already. But I cannot find a link to download it. It's beyond frustrating.
    Ive checked under "my orders" and I dont have any, so I cannot download it from there. =/

    I appreciate this suggestion, but it isnt on this website. =/
    Searched through it manually, and also used the search toolbar. The only thing pertaining to "Photoshop Elements 5" it had was a comparison page.
    I'd call customer service, but I honestly dont have 35$ I can just throw at it to call them.

  • How do I change the Latest Headlines bookmark from BBC to RTE so that similar options are displayed when I click the icon?

    I want to change the Latest Headlines bookmark to RTE and have similar options re. articles pop up when I click the icon. I've tried right clicking and changing the site location but nothing changes.

    You can visit the RSS Feed site of RTE and subscribe to that feed to create a bookmark:
    http://www.rte.ie/rss/news.xml

  • I have had my Iphone 4s for a little over a week now. It just DIED...Can some one please tell me why? the battery life was at 90% I sure do not want to lose all my picture's of my Grand-Daughter, or everything that I have purchased on it. Can someone help

      I have had my IPhone 4S for a little over a week now. My battery life was at 90% It Died, Dead, Does not work at all. Can someone tell me what in the heck is going on here. I have had all of the Apple Phones and They all had their little quirks..But This is ridiculous is it just with the Black 4S or the White 4S or both. Help?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • HT4623 My app icon shown i have 11 items waiting for updating. But the update is blank. I try to reset, switch my ipad off and reboot it, sync my ipad the 11 items still remain. Can someone please advise me how to clean this up.?

    My ipad 2 app icon show I have 11 items need updating but there is nothing on the app update page. I tried all method to reset my ipad, sycnc my iTunes with ipad connected, reset my ipad but not successful. The 11 items still appear on my app icon. Can someone help me?

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • Can someone explain to me how this line of code works?

    My friend put in this code to my game script
    if CollisionDistance < 2 then
    else if "pMushroom" = string(collisionModel).char[8..16] then
    pInfo = member("Info") 
          pInfo.Text = "Press 'F' to consume Mushroom"
    else
    end if
    else
        pInfo = member("Info") 
        pInfo.Text = ""
      end if
    So this is used in my game so that when a ray is less than 2 units away to hits an object named pMushroom, instructions would come up that say "Press 'F' to consume Mushroom" (I'm sure you already knew that though).
    I have a bunch of mushrooms out lebed pMushroom01 - pMushroom09
    I tried to use this for other models like:
    else if "pStick" = string(collisionModel).char[8..16] then
    pInfo = member("Info") 
           pInfo.Text = "Press 'F' to take Stick"
    But the instructions do not pop up. I've checked that I was the right distance away with my collision detection.
    Could someone explain to me the code and what could possibly be wrong?
    "char[8..16]" is what I really don't get.

    collisionModel is most likely a property variable. So "else if "pStick" = string(collisionModel).char[8..16] then" is taking whatever is in that variable, and setting it as a string. Then it is parsing out the characters in that string from character 8 to character 16 and comparing that sub string to the string pStick.
    This works in the first example because "pMushroom" has 9 characters. "pStick" has six characters and so it will never be equal to those characters in collisionModel. You might try:
    else if "pStick" = string(collisionModel).char[8..13] then
    it may work.

  • Can someone explain to me in laments terms this SQL

    work_days_status :=
    TO_NUMBER (SUBSTR (REPLACE (work_days, ','),
    CASE
    WHEN MOD (v_loop_counter, 7) = 0
    THEN 7
    ELSE MOD (v_loop_counter, 7)
    END,
    1
    I'm looking through a new database and dont really understand what MOD is, if someone could explain on very high level (not too technical) and specifically the example here I would be very greatful!!!!

    Hi,
    Mod sort of 'divides without decimals' and returns 'the leftovers'...
    MHO%xe> select mod(11, 4) from dual;
    MOD(11,4)
             3
    1 rij is geselecteerd.
    Verstreken: 00:00:00.03
    MHO%xe> select mod(12, 4) from dual;
    MOD(12,4)
             0
    1 rij is geselecteerd.So, in the first query: 11/4 doesn't 'fit': 3 times 4 = 12, however 2 times 4 = 8 (they 'fit') , the difference between 11 and 8 = 3, so MOD returns 3 (the 'leftovers').
    In the second query: 12/4 (= 3) 'fits' perfectly, no 'leftovers', so MOD returns 0.
    See link below:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions088.htm#sthref1617

Maybe you are looking for