I cannot get sound through cable box after connecting apple tv

I cannot get sound through cable box after connecting apple tv, any suggestions?

Perhaps you disturbed or loosened the HDMI or other cable  from the cable box to the TV?

Similar Messages

  • I cannot get sound through my laptop speakers ever since I used a digital speaker

    I cannot get sound through my laptop speakers ever since I used an external digital speaker.  Cannot seem to switch back to lap top speakers in my SYSTEM PREFERENCES...only showing DIGITAL out put option

    Hi there Lutostan,
    It sounds like you have disconnected the digital audio speakers from your MacBook Pro but all you have available in your audio settings. Take a look at this info from the following article named:
    Troubleshooting issues with no audio from built-in speakers on Macs
    If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
    Confirm again that all external audio devices and cables have been removed.
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    If you do not see a red light, proceed to step 5.
    If the issues persist, contact Apple support for further troubleshooting assistance.
    Learn more
    You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Cannot get sound through my surround sound tv - only pictures - sound works fine through tv speakers - why is this?

    Apple TV is working for pictures and sound via my television speakers but I cannot get sound via my surround sound speakers with HDMI or an Optical Lead.
    Anyone care to advise me what I may have done wrong in the connections?

    If you have connected your TV by HDMI via your receiver and you get sound from your TV but not your receiver then the problem must lie within your receiver or its settings. Check the manual to ensure you have selected the correct settings for it.

  • No sound through tv speakers after connecting dv7-1247cl via hdmi

    no sound on laptop after hdmi for external screen is plugged.if unplugged sound on laptop is ok

    Hello guanaco1,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how there is no sound coming to the TV from your DV7-1247cl notebook over an HDMI connection, and I would be happy to assist you in this matter!
    To further diagnose the issue, I recommend following this document on Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices. This should help with the sound transfer from your notebook to the TV.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Have a great weekend!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Can't get sound through headphones

    I cannot get sound through earbuds

    Couple of things to check here. 
    1.  Toggle volume buttons on headset
    2.  Check sound settings
    2.  Try a different headset to rule out the phone
    3.  If a second headset does not work check the headphone jack for debris
    4.  If no debris, and the phone is still under warranty, contact Apple Support or go by an Apple Store for service

  • I cannot get mail through icloud.

    After upgrading to OSX, I cannot get mail through the icloud. All relevant boxes are ticked; i can update calendars, messages with both my Mac and iPhone, but there is no mail coming through on my Mac, I can get mail on the phone. I have had to use outlook to get mail.
    Please advise

    Go to System Preferences>iCloud and confirm that you have signed into your iCloud account and have checked Mail.  If you have, try going to System Preferences>iCloud, uncheck Mail, restart your Mac, then go back and check Mail.  If that doesn't fix things, go to System Preferences>iCloud, click Sign Out, choose Delete at all of the prompts (your data will still be in iCloud), restart your Mac, then go back and sign back in.  Your iCloud data will reappear on your Mac after a brief delay as it redownloads.

  • TS1631 I cannot get sound on downloaded apps?

    I cannot get sound on downloaded apps.  I do get sound from music download.. 

    Hello Michelle,
    I would be concerned too if the speaker on my iPhone was not working.  I found an article with some steps to take when you are experiencing issues like this.
    I recommend reviewing the full article, but step 2 specifically stood out to me for the issue you are experiencing:
    2. Make sure the Ring/Silent switch is not switched to silent.
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS4002 Cannot get  mail on my iMac after responding to move to iCloud.

    Cannot get  mail on my iMac after responding to move to iCloud. 
    Mail Accounts settings:  Incoming Mail Server=mail.me.com and is grey(cannot change), IMAP Path Prefix=blank, Port =143 but greyed out, Use SSL not checked

    You need SSL to be enabled: you chould check it and the port will probably change to 993. You should also check SSL in the SMTP server settings.
    That done you should be able to use the existing MobileMe settings. If you are still having trouble you could go through the setup procedure for the iCloud server settings detailed here:
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • I cannot get sound from apple TV. Has anyone had the same experience and what did they do?

    Hi, I recently bought Apple TV 2nd gen. I can, after a while, get access to my library but when I start to play movies I cannot get sound. Has anyone had a similar experience? If so what did you do to overcome the problem?

    Do the movies contain both stereo and 5.1 audio.
    Have you tried toggling the Dolby Digital setting or the Audio Output setting.

  • I cannot get sound from the web, you tube, etc, however, my speakers are on, my itunes play sound?

    I cannot get sound from the web, you tube, etc, however, my speakers are on and my itunes play sound? What gives?

    Hi,
    Try the following.
    First, download the Flash uninstall utility on the link below and save it to your Desktop.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows and run the uninstaller.  After this has completed, restart the notebook.
    Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if Youtube videos etc play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart IE.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I cannot get sound on my iPad mini. Any ideas?

    i cannot get sound on my iPad mini. Des anyone know how this can be fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • I cannot get sound to play from the internet when I hook it up to my TV via HDMI.

    Itunes plays but I cannot get sound from the internet to play. Please help!

    How old is your MBP? Some older MBPs don't support audio through HDMI, so you have to run a separate wire.
    If your MBP is fairly recent, visit System Preferences > Sound > Output and select the device corresponding to your TV. (In my case, it includes the brand name of the TV in the "Name" column and "HDMI" in the "Type" column.)

  • Cannot get windows update to run after hard drive install and recovery

    I cannot get windows update to run after a new shdd 1 tb was installed.
    I have a pavilion dv7 4083cl. My recovery set did not work so I used the OEM set.
    Any help would be appreciated

    Hello kjdsynz,
    Have you taken a look at the HD & SSD manual?  Did the recovery fail?  If you take a look at this page for help with that.
    Please let me know if this has helped.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    one of those days --- it's the PLACE dialogue box

  • TS2634 I can only get sound through my ipad with the head phones.

    I can only get sound through my ipad with the head phones. I haven't had this problem before. I upgraded about a week ago, but this is the first time the sound has been an issue. When I turn up the volume it shows that it is the volume for the headphones but I can't figure out how to adjust the volume for everything. I have rebooted.

    Also try this if above doesn't work.
    1. Plug and unplug my headphone jack into the iPad four times.
    2. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound.

Maybe you are looking for

  • To generate quota only for disabled employees

    Hi All, i have one requirement here. i need to generate quota for challeneged employees. but there is no separate ESG for time quota to identify challeneged employees. i created challeneged groups in challenge infotype 0004. ans assigned this challen

  • How to implement multiple Value Helps within the same Application ??

    Dear Experts, I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the applicat

  • Issues installing 10.2.3 and upgrading to 10.2.8 on an iBook G3

    Hello all We have recently acquired an older iBook (500 MHz, dual USB, I think) from a colleague, and we are trying to make it functional as just an internet computer or possibly as a word processor (i.e. install MS office on it). Nothing too spectac

  • In need of a script to backup FCP project files

    I am in desperate need of something that will search through all of my network drives, find Final Cut Pro project files, and copy them to a folder on my desktop. From there I can burn that folder onto a DVD every week for backup purposes. I really do

  • Can't drag files and folders to iTunes

    You're supposed to be able to drag files and folders from windows into iTunes, either just to add them to the library or to a specific device or playlist. However, when I try to do this now it just shows a little red circle with a slash like when you