I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

me-p wrote:
Is it true?
for the time being, yes.
however, Airfoil can do what you want.

Similar Messages

Audio stutters on Apple TV when new device connects to wifi

Apple TV is merrily playing music (all of which is actually synched onto the Apple TV) - if I then open up my MacBook and it connects to the web using the same wifi connection as the Apple TV, the music stops for about a second. Not a major issue, but not great if at a party the music suddenly just stops... Anybody got any ideas?

Could be network bandwidth issue transiently if Macbook makes loads of wi-fi accesses when starting.
Could be wireless router transiently becoming unresponsive to AppleTv while it negotiates with the new device.
Could be the MacBook finding AppleTV and some communication between them taking priority on the AppleTV such that AppleTV can't handle the music playback too - it should be designed to be resilient to this sort of thing, but it isn't a very powerful device and some hiccups i think are due to it's hardware not coping, just like a computer becoming transiently unresponsive if CPU hogged by some process.
If you are opening iTunes on Macbook, try unchecking 'Look for AppleTVs' in Preferences - I seem to recall a few people saying this helped a similar issue, and it would imply that this prevented some interaction between itunes and AppleTV that stopped other functions transiently.

I cannot send email - error message as follows : 'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk.' I can send email from other apple devices, and the email settings are identical. Any ideas?

For some reason I cannot send email - all was working fine, but now I get the following error message when I try to send email:
'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk'
I can receive incoming mail ok and I can send email from other Apple devices. The problem seems confined to my Mac Book Pro.
Ant ideas?

Hello there, Pablo639.
The following Knowledge Base article offers up some great steps for troubleshooting mail issues on your Mac:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

Are the movies in the correct format:
Video formats
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Audio formats supported
HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
When you say tit only sees your music folder, are you saying it only sees your music folder or does it see other empty folders.

5.2 update does not send audio from video played via Apple TV to AirPlay-enabled speakers and devices or AirPort Express.

I just updated my Apple TV to release 5.2, which is supposed to give Apple TV the ability to "Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs)." Problem is, this does not seem to be the case.
I have two AirPlay enabled devices:
1) Bose SoundLink Air
2) AirPort Express
In the Apple TV menu, I selected Settings, AirPlay, Bose SoundLink Air. I then played a video; the audio from the video played from my projector's speakers - not from the Bose speaker. I then went back to Apple TV's Settings/AirPlay and selected "Airport Express" (which connected via an aux cable to a speaker)...audio continued to play over my projector's speaker. I can, by the way, play audio on both the Bose and the speaker connected to the Airport Express if I select either of them from the AirPlay menu.
Am I doing something wrong, or is the 5.2 update not working as described?

No. But, are your speakers only connected to the AE or are they also connected to an amplifier?
You would need to use a Toslink cable to go from the Apple TV to the speakers/amp.
I don't use this or know a lot about it, but it is wildly popular, inexpensive and may be of help:
http://www.rogueamoeba.com/airfoil/
Message was edited by: bobbyco57 to add Airfoil info.

I cannot change apple id when the app store asks me to update anything

i cannot change apple id when the app store asks me to update anything

App Store products can only be updated by signing in to the store with the same Apple ID that was originally used to download them. You can't update anything, including your own purchases, as long as there are pending updates linked to the other ID.
If you can't sign in with the other ID, you have to delete all the apps that are linked to it. If you don't know which apps those are, see below.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Delete each such item by following the instructions in the Apple Support article linked above.
5. Quit and relaunch the App Store.
If you find these instructions confusing, ask for an alternative method.

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV to the Sony, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

Is this an iphone question?
You have posted in the iphone forum.

I got n-track long time ago with my apple id... how can transfer app from that apple id to the apple id im using now?

i got n-track long time ago with my apple id... how can transfer app from that apple id to the apple id im using now?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are.

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are, as I am using the exact same ID right now.
I have switched my password in the past, so my theory is my mac mini thinks that my password has not changed and it will not update because The Wi-Fi password has also changed so it cannot connect to any servers...Does that sound like I am on the right track?
Is there a way to update my Wi-Fi password (saved into the computer) without logging on?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.

I am using an airport express to stream from iTunes to my stereo. My router is a net gear type G. Setting up is no problem for the first time. But, when I close iTunes then restart I have to reset (using the reset button)and reset up. Wanna do it one?

Using a. Airport express to stream from iTunes. My Router is a Netgear type G. The express sets up fine and works the first time. When I try to use it at a later date after closing then reopening iTunes I have to physically reset the express and then go through the process of finding it again. Is this normal?

I have a 3rd generation (802.11n capable, 2.4Ghz only) airport express, my problem is that I've tried using it to extend my network and that brick wall, no matter how close I get the express to the room, the signal and throughput in that room becomes abysmal.
As you might imagine, brick is a lot like cement, and it will not allow much of the wireless signal through.
Regarding your Express, there is no such thing as a 3rd Generation model....yet. You likely have a 1st Generation AirPort Express. Check and confirm the Model No on the side of the Express. A 1st Gen model is A1264.
Here's my problem, I don't think the express supports "extending" a network from a wired network jack.
The Express can "extend" wirelessly, or using an Ethernet connection. The configuration for this is very simple, but post back if you need it.
The jack just seems to be shut off
Have you temporarily turned off the wireless on a laptop and tried to connect it using an Ethernet cable to the wall jack as a "test"?
If you can get a good Internet connection this way, then you know the Ethernet cabling and jack are working correctly.
On the other hand, if you cannot get an Internet connection on the laptop during this "test", then this indicates that the Ethernet cable or jack is not functioning correctly and the wiring will need troubleshooting before you can proceed any further.
I need to create a whole new wireless network in this room for this configuration to work?
AirPort Setup will take care of this for you automatically during the configuration of the AirPort Express.
If I have an apple TV connecting to the express and an AppleTV connecting to the extreme, will they both be visible when connected wirelessly to either network?
Yes
Will I be able to connect to my network seemlessly?
Yes
Post back after you have confirmed that the Ethernet cable and Ethernet jack are functioning correctly in the temporary "test" mentioned above. Then, we will continue.

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
Joe

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field

Hi,
I am using Access 2013 and I have the following VBA code,
strSQL = "INSERT INTO Master SELECT * from Master WHERE ID = 1"
DoCmd.RunSQL (strSQL)
when the SQL statement is run, I got this error.
SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field
Any suggestion on how to get around this?
Please advice and your help would be greatly appreciated!

Rather than modelling the many-to-many relationship type by means of a multi-valued field, do so by the conventional means of modelling the relationship type by a table which resolves it into two one-to-many relationship types. You give no indication
of what is being modelled here, so let's assume a generic model where there is a many-to-many relationship type between Masters and Slaves, for which you'd have the following tables:
Masters
....MasterID (PK)
....Master
Slaves
....SlaveID (PK)
....Slave
and to model the relationship type:
SlaveMastership
....SlaveID (FK)
....MasterID (FK)
The primary key of the last is a composite one of the two foreign keys SlaveID and MasterID.
You appear to be trying to insert duplicates of a subset of rows from the same table. With the above structure, to do this you would firstly have to insert rows into the referenced table Masters for all columns bar the key, which, presuming this to be
an autonumber column, would be assigned new values automatically. To map these new rows to the same rows in Slaves as the original subset you would then need to insert rows into SlaveMastership with the same SlaveID values as those in Slaves referenced
by those rows in Slavemastership which referenced the keys of the original subset of rows from Masters, and the MasterID values of the rows inserted in the first insert operation. This would require joins to be made between the original and the new subsets
of rows in two instances of Masters on other columns which constitute a candidate key of Masters, so that the rows from SlaveMastership can be identified.
You'll find examples of these sort of insert operations in DecomposerDemo.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
In this little demo file non-normalized data from Excel is decomposed into a set of normalized tables. Unlike your situation this does not involve duplication of rows into the same table, but the methodology for the insertion of rows into a table which
models a many-to-many relationship type is broadly the same.
The fact that you have this requirement to duplicate a subset of rows into the same table, however, does make me wonder about the validity of the underlying logical model. I think it would help us if you could describe in detail just what in real world
terms is being modelled by this table, and the purpose of the insert operation which you are attempting.
Ken Sheridan, Stafford, England

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!, has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!

has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!, has anyone else lost the ability to see apple tv on the device list, its no longer under devices either!

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

Are the prices shown on Apple online stores the price actually paid or are these prices subject to extra local taxes..VAT or purchase tax etc

Are the prices shown on Apple online stores the price actually paid or are these prices subject to extra local taxes..VAT or purchase tax etc

Paul_31 wrote:
I think it varies. In the UK and France, for example, where I have purchased from the online store the prices included relevant taxes. I believe that in the USofA and perhaps some other countries that the price shown is net of tax because the tax rate varies from state to state.
You can always go through the process of preparing an order at the Mac Online Store for your country and it should show the price together with any taxes. You don't, of course, actually have to place the order .
I'm sure someone will correct me if I'm wrong about the USA online store.
Correct Paul - in the USA, each State sets its own sales tax, so the tax is only calculated during checkout once you've entered shipping/billing information. Even within some states, some cities have their own sales tax rate (eg. New York State is 4% but New York City is 8.875%).

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

Similar Messages

Maybe you are looking for