I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.
I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.
iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
Good luck, hope this helps.
Lil
Similar Messages
-
I rubbed the iTunes gift card back off, I was unable to read the serial number as part of it came off, can any one help.
If the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
I have a Mac Book Pro 2.4 GHz Intel Core i7; Memory 4 GB 1333 MHz DDR3
Mac OS X Version 10.7.5
I updated to iTunes 12.0.1.26 and I am trying to burn a playlist and I get the following message: "Disc burner or software not found" . I have burned lots of CD's and DVD's before and this is the first time I get this message and cannot burn anything. Can anybody help me, please?Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik -
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?
You might find useful information in item D1 of Time Machine Troubleshooting.
-
After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?
You got it downloaded and I assume you mean it is installed as well. It was buggy for me.
I had to close and restarted iTunes before I could use it properly.
Then, I had to unplug and replug in my phone before it recognises it.
Just had to try everything. As final choice, update over the air. I try to avoid it as it tends to have more problems than a tethered update. -
I cannot install creative cloud after running the cleanup tool can any one help
I cannot install creative cloud after running the cleanup tool can any one help?
Hi len@iostudios,
Please follow the link https://helpx.adobe.com/download-install.html to install creative cloud.
Incase you have any issue
Please let us know with the exact error or attach the screenshot if possible.
Regards -
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
I am having problems with Safari --- running slowly at times but shutting down unexpectedly at other times and displaying the error message saying something about the sonic foundry plug-in. I cannot find this anywhere on my computer. It seems to happen when I visit the Cooking Light website. Strange.
Anyone have any ideas?
Also, when the box pops up asking if I would like to submit a report to Apple, and I choose submit, it tells me that I cannot submit the report. Frustrating.
Help!You're infected with the Flashback malware. It takes advantage of a defect in the Java web plugin to install itself when you visit a contaminated website. No fix is available from Apple for your obsolete version of the Mac OS. You may be able to clear the infection by running the removal tool developed by a third party:
Flashback Removal Tool - F-Secure
Back up all data before you take this step. If it works, change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.
Disable Java (not JavaScript) in the settings of all your web browsers, and leave it disabled as long as you're running Mac OS 10.5.x. To disable Java in Safari, select Safari ▹ Preferences ▹ Security and uncheck the box labeled Enable Java. -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
I just purchased a complete series on itunes... Im trying to watch the episodes but its only showing 20 seconds.. can some one help me know what Im doing wrong?
Hi bibisandoval,
Thanks for visiting Apple Support Communities.
If the movie has completely downloaded, I recommend deleting the movie and downloading it again from your list of purchased movies. See this article for the steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you are still not able to play the movie, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Regards,
Jeremy -
TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
i recently upgraded iPhones and so did my mum so when i was setting them up i linked the icloud between the two and since then my phone will only keep her contacts even if i restore my phone back to my old phones settings. when i have restored to my
-
Uploaded text file has a new line added at the top using BSP MVC applicatio
I have a BSP MVC application that uploads data on to the application server. When I open the uploaded text file, the very first line on the file looks like the line below. -> htmlb:button:click:nullhtmlb_form_1UploadUpload0htmlbdfsdf But the rest of
-
Physical reason of the whine (CPU, LCD) - explanations and suggestions
Hi everybody, a friend of mine just received his MacBook Pro (2 Ghz, 2 GB RAM, 5400 RPM 100GB HD) yesterday. I encouraged him to buy one of these machines in spite lots of people are complaining about the whine. We hoped he would be lucky to get one
-
Track Or report Stolen iPhone with IMEI or model
My iPhone was stolen. It had no SIM card, but I have both the IMEI and Model #. Is there anything i can do? Should i contact Apple or AT&T? thanks
-
OEM Agent Deploy installation fails
Hi, I'm having a problem doing a new full agent push install 10.0.2.0 to a Linux box from a windows OMS. I'm really after any suggestions of what to investigate next to resolve this problem. Last successful message appears to be: INFO: File to proces