I cannot make outgoing call with uc500.

please help
i have uc500 router. i have conifured my dial peers very simply . i can receive the call from outside . but i cannot make a call. whenever i am trying to make a call.
just Ring Out is appearing with starting buy tone or some time it going telecom company. this is my simple dial peers configuration
dial-peer voice 50 pots
description long distance
preference 5
destination-pattern 9T
port 0/1/2
forward-digits all
no sip-register
dial-peer voice 51 pots
destination-pattern 9[2-9].........
port 0/1/2
forward-digits all

shakirullah,
Please collect below debugs from uc500 and attach it here.
Router(config)# logging buffer 5000000
Router#debug voip ccapi inout
Router#debug vpm signal
Router#debug voip vtsp default
Router#debug voip vtsp session
Router#Clear log
Now make one test outgoing call and re-create the issue.
Router# undebug all --->turn off debugs
Router# show log----->collect the entire output of this and attach it here
Mention calling and called numbers.
-Abhi

Similar Messages

IPhone 6 Plus cannot make outgoing calls and cannot send text messages

I haven't been able to make outgoing calls and outgoing messages through my iPhone6+ since yesterday.
I have done research and have tried suggestions like turning the phone into airplane mode, turning off the iPhone, re-setting the network settings, erased all the content of my iPhone and restored backup, erased all contents and used as new phone but I still cannot make outgoing calls nor can I send test messages. At first I thought I did not have sufficient money on my sim card however when I tried my simcard on another iPhone, it worked perfectly. I also tried another simcard on my iPhone, but it still can't make a call. I have never had this problem since I got my new iPhone6+ last December. This is the first time I've had a problem like this with an iPhone and I've been using the iPhone since iPhone 4s,iPhone 5 and iPhone 5S. Could there be something wrong with the unit that I have? Is there any other troubleshooting I could do?

If you restored the device as new and it did not work, then I suggest you contact your carrier. The function of phone calls and SMS messages is a carrier function. They would need to test your account. Your only other option would be to make an appointment at the Genius Bar to have the device examined.
Can you receive a call and/or message? If so, then I would suspect the SIM and the carrier.

I Cannot make outgoing calls since i've installed ios 4.0.1

I need help i don't know what happened about apple since i've installed ios 4.0.1 in my 3gs iphone it reboots when i'm calling, i hear metallic sounds, i lose signal sometimes and now i cannot make outgoing calls it's crazy.

My default printer was "Epson Stylus Photo R1900 Series" as usual. There were two or three printer icons with XPS in their names. I deleted all with XPS in their name. The printing began working immediately! THANK YOU.

VCS-E unable to make outgoing call with search rule not found error

Hi
I deploy telepresence device registered to CUCM and connect with VCS-C and VCS-E. The issue now is I am not able to make outgoing call and my search rule show not found, request time out.
I use DNS zone to make the outgoing call and my VCS-E is able to resolve DNS SRV record. However search rule result show not found.
Any advise are appreciated.

Hi
I managed to make a call to address that I am trying to reach. But it supposed to come up with PIN number to enter instead I saw the message that no incoming video.
Can you please advise what could be the issue.
tvcs: Event="Call Connected" Service="SIP" Src-ip="10.84.83.101" Src-port="27224" Src-alias-type="SIP" Src-alias="sip:[email protected]" Dst-alias-type="SIP" Dst-alias="sip:[email protected]" Call-serial-number="24a63c27-42b4-4950-ba02-6a548b279a09" Tag="f060faef-441f-47a2-9c75-e1b0623b5e14" Protocol="TCP" Call-routed="YES" Level="1" UTCTime="2015-02-25 14:38:32,604"

Cannot Make Outgoing Calls

I have an iPhone 6 - 64 GB and am using iOS 8.2.
I can receive incoming phone calls, receive and send iMessages and text message, and all connectivity to wi-fi and LTE seems to be working properly.
However, I am unable to make an outgoing call. I hear three beeps and it hangs up. I have tried with wi-fi on and off.
Any thoughts?

I found a solution to the problem for now.
Go to Cellular Data > Enable LTE > Change from "Voice and Data" to "Data Only"
I have LTE for Data purposes, but 4G for calling purposes.
AT&T, iPhone 6, iOS 8.2

I cannot make outgoing calls after update to iOS7.1

since i updated my iphone4s i have been having problems making outgoing calls... cannot send sms either.. got a call and thats about it since the update.. pls i need help with this.. i have tried the *#31# that did not work, switched off the wifi and all, nothing worked.. tnx in advance

What you describe...
Two iPhones
Same issue
Same general physical location (your house?)
... sounds very much like " cellular signal dead spot " OR "radio frequency interference"
Test this by noting exactly where in your house that this takes place and also where it does NOT. Repeat until you have a "Map" of the good and bad spots.
You cannot do much about the cellular signal but may be able to troubleshoot the interference problem. This document talks about Wi-Fi and Bluetooth, but the "Sources" might also apply to your cellular signal problem - radio waves are radio waves.
Wi-Fi and Bluetooth: Potential sources of wireless interference - Apple Support
ÇÇÇ

Cannot make outgoing Calls on Mac OS X Yosemite

Hi, I added credit on my skype account but i cannot make any outgoing calls, incoming calls are working fine.
Please let me know how to fix this.

Hi and welcome to the Skype Community,
Please have a look at this help article: https://support.skype.com/en/faq/FA391/is-skype-blocked-in-the-united-arab-emirates-uae
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Can't make outgoing call with Skype Connect

I have my Asterisk PBX configured with Skype Connect using SIP with TLS and SRTP. Most of my outgoing calls go through, but sometimes I can't get call out. I was able to leave asterisk console up and collect verbose and sip debug data. Can somebody help me diagnose why my calls aren't going through?
I've changed my external IP (I'm behind a NAT'd firewall) to 1.2.3.4 and my SIP profile's user ID to 11111111111111. and my domain name to test.com. If someone working for Skype needs that information they can email me and I'll send it privately.
My config:
[general]
context=default_context
allowguest=no
alwaysauthreject=yes
allowoverlap=no
udpbindaddr=0.0.0.0
tlsenable=yes
tlsbinddir=0.0.0.0
tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
tlscipher=ALL
tlsclientmethod=tlsv1
tcpenable=yes
tcpbindaddr=0.0.0.0
transport=udp,tcp,tls
srvlookup=yes
dynamic_exclude_static = yes
buggymwi=yes
contactpermit=192.168.1.0/24
register => tls://111111111111111:[email protected]
[skype]
type=friend
context=from-skype
dtmfmode=rfc2833
host=sip.skype.com
username=11111111111111
fromuser=11111111111111
secret=abcd12345
disallow=all
allow=ulaw
allow=alaw
nat=yes
fromdomain=sip.skype.com
insecure=port,invite
transport=tls
srtpcapable=yes
encryption=yes
SIP Debugging enabled
[2012-08-23 19:22:33] NOTICE[16552]: chan_sip.c:13465 sip_reregister: -- Re-registration for [email protected]
> doing dnsmgr_lookup for 'sip.skype.com'
> ast_get_srv: SRV lookup for '_sips._tcp.sip.skype.com' mapped to host 1.sip.skype.com, port 5061
REGISTER 11 headers, 0 lines
Reliably Transmitting (NAT) to 63.209.144.201:5061:
REGISTER sip:sip.skype.com:5061 SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport
Max-Forwards: 70
From: <sip:[email protected]>;tag=as6edf93cf
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 32495 REGISTER
User-Agent: Asterisk PBX 10.5.2
Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:sip.skype.com:5061", nonce="5036b5770000182c78c1d1909cfd5c74e33f033c952d240d", response="81001ceacd91b16ebb956d3c55991471"
Expires: 120
Contact: <sip:[email protected]:5061;transport=TLS>
Content-Length: 0
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 200 OK
From: <sip:[email protected]>;tag=as6edf93cf
To: <sip:[email protected]>;tag=c990d13f-90f7a10d-0-55cb59a8-0
Call-ID: [email protected]
CSeq: 32495 REGISTER
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport=50541;received=1.2.3.4
Expires: 45
Contact: <sip:[email protected]:5061;transport=tls>;expires=45
Content-Length: 0
<------------->
--- (9 headers 0 lines) ---
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: REGISTER)
[2012-08-23 19:22:33] NOTICE[17932]: chan_sip.c:21399 handle_response_register: Outbound Registration: Expiry for sip.skype.com is 45 sec (Scheduling reregistration in 30 s)
<--- SIP read from UDP:192.168.1.16:5060 --->
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Max-Forwards: 70
Contact: "Scott's Office" <sip:[email protected]:5060>
Expires: 240
User-Agent: Cisco/SPA504G-7.5.2b
Content-Length: 234
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
Supported: replaces
Content-Type: application/sdp
v=0
o=- 88651316 88651316 IN IP4 192.168.1.16
s=-
c=IN IP4 192.168.1.16
t=0 0
m=audio 16484 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
<------------->
--- (14 headers 12 lines) ---
Sending to 192.168.1.16:5060 (NAT)
Using INVITE request as basis request - [email protected]
Found peer 'scott_office' for 'scott_office' from 192.168.1.16:5060
== Using SIP RTP CoS mark 5
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Found audio description format PCMU for ID 0
Found audio description format PCMA for ID 8
Found audio description format telephone-event for ID 101
Capabilities: us - (ulaw), peer - audio=(ulaw|alaw)/video=(nothing)/text=(nothing), combined - (ulaw)
Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
Peer audio RTP is at port 192.168.1.16:16484
Looking for 19739928881 in home (domain asterisk.test.com)
list_route: hop: <sip:[email protected]:5060>
<--- Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact: <sip:[email protected]:5060>
Content-Length: 0
<------------>
-- Executing [19739928881@home:1] Dial("SIP/scott_office-000000b0", "SIP/skype/+19739928881") in new stack
== Using SIP RTP CoS mark 5
Audio is at 9302
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 63.209.144.201:5061:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 102 INVITE
User-Agent: Asterisk PBX 10.5.2
Date: Thu, 23 Aug 2012 23:22:34 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 370
v=0
o=root 1671301052 1671301052 IN IP4 192.168.1.15
s=Asterisk PBX 10.5.2
c=IN IP4 192.168.1.15
t=0 0
m=audio 9302 RTP/SAVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
-- Called SIP/skype/+19739928881
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 100 Trying
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 102 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 407 Proxy Authentication Required
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 102 INVITE
Proxy-Authenticate: Digest realm="sip.skype.com", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", algorithm=MD5
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
set_destination: Parsing <sip:[email protected]> for address/port to send to
set_destination: set destination to 63.209.144.201:5060
Transmitting (NAT) to 63.209.144.201:5061:
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 102 ACK
User-Agent: Asterisk PBX 10.5.2
Content-Length: 0
Audio is at 9302
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 63.209.144.201:5061:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 103 INVITE
User-Agent: Asterisk PBX 10.5.2
Proxy-Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:[email protected]", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", response="6efb0e37178bae868f0a1e0ddf110e3c"
Date: Thu, 23 Aug 2012 23:22:34 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 370
v=0
o=root 1671301052 1671301053 IN IP4 192.168.1.15
s=Asterisk PBX 10.5.2
c=IN IP4 192.168.1.15
t=0 0
m=audio 9302 RTP/SAVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 100 Trying
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
Really destroying SIP dialog '[email protected]' Method: REGISTER
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 180 Ringing
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
User-Agent: SipGW 8
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (9 headers 0 lines) ---
list_route: hop: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
-- SIP/skype-000000b1 is ringing
<--- Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact: <sip:[email protected]:5060>
Content-Length: 0
<------------>
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 408 Request Timeout
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Content-Length: 0
<------------->
--- (7 headers 0 lines) ---
[2012-08-23 19:22:45] WARNING[17932]: chan_sip.c:20947 handle_response_invite: Re-invite to non-existing call leg on other UA. SIP dialog '[email protected]'. Giving up.
set_destination: Parsing <sip:[email protected]> for address/port to send to
set_destination: set destination to 63.209.144.201:5060
Transmitting (NAT) to 63.209.144.201:5061:
ACK sip:[email protected]:5061;maddr=63.209.144.201;transport=tls SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 103 ACK
User-Agent: Asterisk PBX 10.5.2
Content-Length: 0
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [19739928881@home:2] Hangup("SIP/scott_office-000000b0", "") in new stack
== Spawn extension (home, 19739928881, 2) exited non-zero on 'SIP/scott_office-000000b0'
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
<--- Reliably Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0
<------------>
<--- SIP read from UDP:192.168.1.16:5060 --->
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 ACK
Max-Forwards: 70
Contact: "Scott's Office" <sip:[email protected]:5060>
User-Agent: Cisco/SPA504G-7.5.2b
Content-Length: 0
<------------->
--- (10 headers 0 lines) ---
Really destroying SIP dialog '[email protected]' Method: INVITE
Really destroying SIP dialog '[email protected]' Method: ACK

I wound up calling skype support. This is the final sip.conf looks like. Hope it helps. Good luck.
Scott
[general]
context=default_context
allowguest=no
alwaysauthreject=yes
allowoverlap=no
udpbindaddr=0.0.0.0
tlsenable=yes
tlsbinddir=0.0.0.0
tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
tlscipher=ALL
tlsclientmethod=tlsv1
tcpenable=yes
tcpbindaddr=0.0.0.0
transport=udp,tcp,tls
srvlookup=yes
dynamic_exclude_static = yes
buggymwi=yes
contactpermit=192.168.1.0/24
register => tls://[email protected]
[skype]
type=friend
context=from-skype
dtmfmode=rfc2833
host=sip.skype.com
username=user
fromuser=user
secret=pass
disallow=all
allow=ulaw
allow=alaw
nat=yes
fromdomain=sip.skype.com
insecure=port,invite
transport=tls
srtpcapable=yes
encryption=yes

PAP2T-NA will not make outgoing calls with Asterisk

I have a PAP2T-NA connected to a Uniden cordless phone and an Asterisk server with working trunks. Inbound calls work fine - the phone rings and sound works both ways. However I am unable to make outbound calls through the PAP2T, even to other local extensions or just to voice mail. After dialing an extension, I hear a short pause and then a fast busy signal.
Dial plan is (*xx|x.). This is all I see with syslog when calling extension 1000 through sip1 (* server):
Feb 26 08:13:51 LinksysPAP [0]Off Hook
Feb 26 08:13:56 LinksysPAP Calling:1000@sip1:0
Feb 26 08:13:56 LinksysPAP [0:0]AUD ALLOC CALL (port=16440)
Feb 26 08:13:56 LinksysPAP [0:0]RTP Rx Up
Feb 26 08:13:56 LinksysPAP RSE_DEBUG: reference domain:sip1
Feb 26 08:13:57 LinksysPAP RSE_DEBUG: reference domain:sip1
Feb 26 08:13:57 LinksysPAP [0:0]AUD Rel Call
Feb 26 08:13:57 LinksysPAP CC:Failed w/ Calling
Feb 26 08:13:59 LinksysPAP [0]On Hook
This is all I see in the * log:
Feb 26 08:16:12 DEBUG[29924] acl.c: ##### Testing 192.168.1.179 with 192.168.1.0Feb 26 08:16:12 DEBUG[29924] chan_sip.c: Setting NAT on RTP to 0
Feb 26 08:16:12 DEBUG[29924] chan_sip.c: Stopping retransmission on '[email protected]' of Response 101: Match Found
Feb 26 08:16:12 DEBUG[29924] chan_sip.c: Setting NAT on RTP to 0
Feb 26 08:16:12 DEBUG[29924] chan_sip.c: Checking SIP call limits for device 100Feb 26 08:16:12 DEBUG[29924] chan_sip.c: Stopping retransmission on '[email protected]' of Response 102: Match Found
I've tried various codecs and regional settings to no effect. Setting an outbound proxy makes no change. Is there something simple I'm missing? Thanks!

HI.....
           Is your voice provider Vonage then Vonage Supports 7-,10- and 11- digit dialing.Use 7-,10- or 11- digit dialing for calls within the same area code as your Vonage phone number. Use 10- or 11- digit dialing for calls outside of your area code.
           Also forward the ports 53, 69, 5060-5061and 10000-20000 for the adapter  IP address.

Cannot make outgoing calls on iphone 5

I cannot make out oging call on my iphone 5. it says call failed.

Go into Settings>Phone>make sure your number is set in My Number.

Cannot make free calls with updated software

I recently downloaded the latest version of Skype and can no longer make free international calls to another Skype user I have communicated with for years. Is the free option no longer available or is there something wrong with the software? I have a desktop all-in-one Win 8.1 -- same setup I have used to make calls.

See
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

I cannot make outgoing cell calls because Skype takes over. How to fix?

I have an Android Samsung run 2.3. Whenever I try to make an outgoing call on my cell phone, it brings up skype and says that I don't have enough money to make a call. I NEVER want to make outgoing calls with skype. How do I turn this off and set it back to using my cell carrier to make the call? This is absolutely horrible that Skype has taking over my phone. Do I have to uninstall it?

Hi Guys, Ultimate solution if you have messedup (scroll to the bottom if you are really annoyed)http://tipsbag.com/whenever-i-try-to-call-the-skype-application-starts/#more-450. It also says other 3 basic solutions.Solution 1.Settings->Application Manager>All Applications->Scroll down until you get to Skype->Choose ‘clear defaults’. if still no difference.TrySolution 2.Downgrade the Skype apk to an older version. if no luck.Solution 3.always sign out/ exit other VoIP apps. If issue is still there, even after trying all these methods please find the answer below which really worked for me.Please find below URL for comprehensive details.http://tipsbag.com/whenever-i-try-to-call-the-skype-application-starts/#more-450hope you will find the solution there.

Why can't I make outgoing calls, but I can receive incoming calls? I'm also able to send/receive text messages.

I'm able to receive calls, but cannot make outgoing calls. I'm also able to receive/send texts and emails. Someone please help!

Help is here for you, ahues1214. Our forum friends did provide some great comments. If you're receiving an error even when dialing the 10 digit pattern, please let us know the message and we'll be sure to find the reason for your calling difficulties. Please also let us know if this is effecting anyone else in your area, along with your zip code.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

My Samsung galaxy 5 will not make outgoing calls

When ever i try to call somebody on my Samsung galaxy s5 the call will come up with a dialogue that says "Please re-enter the 10 digit telephone number you are calling, do not press send, *67, or *82 cannot be used on this call to block or unblock caller id". This is very annoying when i try to call people, like calling in sick to work or some stupid things like that. It will still ring and the call will just be fine if somebody else calls me but i just cannot make outgoing calls. I have tried to restore my phone multiple times and still no fix. If anybody knows how to fix this please let me know SOON!

hi Verizon Wireless Customer Support I have a simple question for you. How is it a customer's problem if VZWSupport cannot see the comments in that customer's account? Now, coming to the point of performing a factory reset. Yes, I performed the factory reset and yes, it has been determined to be a hardware problem. However, my point is that how does a customer suddenly go from paying full price for a brand new (and expensive) phone to a second-hand, 'like new' phone, which has a market value of half of the original brand new version? It just means that I ended up paying top dollar for a brand new phone and instead now have to live with a second-hand phone, which is completely unfair. And, it is unfair because Verizon is not reducing my monthly Edge payments, which are currently aimed to cover the full price of the brand new phone Galaxy s5. So, if you want to be fair, give me the second-hand 'like new' phone, but then also reduce my monthly Edge payment to reflect the market price of a second-hand phone. Do you understand this, Jonathan? Including other users affected here with the identical problem peterporpoise abel8189 dollyspot

HT201412 hello. my phone is factory unlocked. but my iphone support one network only in pakistan. if i insert another network sim it support but cannot make a call or text neither incoming nor outgoing. plz guide me what should i do.

hello. my phone is factory unlocked.
but my iphone support one network (Zong) only in pakistan. if i insert another network sim it support (Catch the signl and show the network name ) but cannot make a call or text neither incoming nor outgoing.
plz guide me what should i do.
ios 7.0.4

There aren't any supported carriers in Pakistan. Apple hasn't released the iPhone there. The OP is using a grey-market iPhone and hence is pretty much on his/her own as regards getting this phone working with the carrier, unless that carrier can help.
Regards.

I cannot make outgoing call with uc500.

Similar Messages

Maybe you are looking for