I cannot see the actual pictures on the photos page

in each picture is an icon of a Canadian flag. Only when I click on each flag can I find the actual photo. How do I get the actual pictures to show up again? I think it is one of the updates on iphoto that caused this issue. Any advice would be much appreciated.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to rebuild the thumbnails. This can take three or four goes to work.

Similar Messages

HT4858 I cannot see the "Photos" icon on my PC's icloud, so I cannot upload any photos. I can see the "photos" icon in my ipad, but it does not show on my PC, Help!

Hi,
I'm trying to upload photos from a USB into icloud so I can see them in my ipad, the problem is, I cannot see the "photos" icon on my icloud account in my PC, so I cannot upload anything. Please help!

To add photos to photo stream on your PC you first you have to set up iCloud on your computer and turn on my photo stream, as explained here: http://www.apple.com/icloud/setup/pc.html. Then you can add photos from your computer to photo stream as explained here: http://support.apple.com/kb/PH2606.

TS1702 I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

Click the Bookmarks icon in the Safari toolbar.
On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
edit by cs

I updated to the latest version and now I do not have the page controls at the right hand side and bottom and can only move the page up and down using the mouse scroll wheel. I also cannot see the whole page I am trying to view.

When I open the web browser I cannot see the whole page and I cannot move the image sideways and must use the mouse scroll to move up and down.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Cannot see the tabbed Page.

Hi,
I want to display two tabs. One for Insert and another for Delete. i have 2 pages one for insert and one for delete.
The following is the setup that I have done.
Functions:
Name: XXHR_NEW_JOB_FAMILY
Type: SSWA jsp function
Html Call: OA.jsp?page=/xxc/oracle/apps/per/selfservice/deployperson/webui/NewJobFamilyPG&OAHP=JOB_FAMILY_HOME&OASF=XXHR_DEL_JOB_FAMILY
Name: XXHR_DEL_JOB_FAMILY
Type: SSWA jsp function
Html Call: OA.jsp?page=/xxc/oracle/apps/per/selfservice/deployperson/webui/DeleteJobFamilyPG&OAHP=JOB_FAMILY_HOME&OASF=XXHR_DEL_JOB_FAMILY
Menus:
Name: NEW_JOB_FAMILY_MENU
Type: HTML Tab
Function : XXHR_NEW_JOB_FAMILY
Name: DEL_JOB_FAMILY_MENU
Type: HTML Tab
Fucntion: XXHR_DEL_JOB_FAMILY
Name: JOB_FAMILY_HOME
Type: Home Page
SubMenu: NEW_JOB_FAMILY_MENU (Prompt: Insert)
SubMenu: DEL_JOB_FAMILY_MENU (Prompt: Delete)
Name: COLT_MGR_SELF_SERVICE_MENU (Responsibility Menu)
Sub Menu: JOB_FAMILY_HOME
After doing this setup, I cannot see the new menu and i cant navigate to the page.
Can any one help me finding the error in my setup so that I can get the link to my page and I can get the tabs displayed.
Thanks in Advance,
Kaushik

Thanks Aj and Reetesh,
But when i directly add function to responsibility as below, i can see the link to the page.
Fucntion:
XXHR_NEW_JOB_FAMILY
Prompt: Insert
After doing so i can see the link on the menu list and i can navigate to the page. I think there is something missing in my setup can you help by giving the details of how to define menus and functions if i want to see the tabbed page do the setup so that i can see the page.
thanks in Advance,
Kaushik

I cannot see the download page when i click on the process at the upper right corner of the browser, is it normal?

I have asked to download a video from an online grabber. It started downloading and the process was showing how much time was left (on the display showing download process) the icon next to the HOME icon on the upper right side of the browser.
I usually click on the icon and it gives me the option "show all downloads". It wasn't working and this is not the first time!
Last time i had to stop a giant download and i couldn't. Even when i restarted FIREFOX it was still running in the background.
I knew this because when i came to close all tabs it said "this will cancel current download".
I had to REINSTALL from ZERO the Firefox.
But now i have this problem where i can't see all the download page. This is the second time and i think it is related to the online video grabber.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

I cannot see the entire page that I am trying to view and there is no option to scroll to the bottom.

How do I see an entire page that has no scroll down option and there are items below. This is a catalog page and I can't see everything on the page.

Hi adobeid234,
This sounds like a browser cache issue. Please try clearing the browser cache (steps vary by browser). Or, try opening the page in a different web browser.
Let us know how it goes.
Best,
Sara

HT4236 I cannot see the photos from my last iphon sync in my iPhoto library on my mac. Help?

After my last sync with itunes on my computer, iPhoto is not showing the last couple months worth of photos from my iPhone camera role in my iPhoto Library. I tried closing iPhoto and restarting the computer and they are still not showing up. Any help?

Photos taken with the iphone are not part of the sync process at all.
You should be importing them to your comptuer regularly as you would with any digital camera.
Open iphoto, connect iphone, import photo

I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

I have an iphone 4 and an HP Pavillion with windows 7. I always have been able to connect my iphone to my laptop and open
the DCIM folder and see the picture icons so I can pick the ones I want to download. After upgrading to iOS8 I cannot see the icons after a
few seconds of connecting the phone to the computer. They all turn into the windows icon.
I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred. I don't want all the pictures I take on my computer.

http://support.apple.com/kb/HT1808

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

The iPhoto library should be in your user folder/Pictures unless it was moved.

Why I cannot see the progress bar whenever I download my apps directly from my App Store ?

Whenever I install an app, I cannot see the app's icon on the home screen and then when I proceed into the home page, the apps will not be installed unless I stay into the App Store and wait till the circle on the top of the screen stop turning. It is really very inconvenient. I'm using iPhone 4S. Anyone knows the solution? And I'm can't see the progress bar showing whether its downloading. I'm using IOS 6. And I've got another issue. Why whenever I want to reinstall the youtube they would say its free. When I press the 'free' it will go into the 'install' and then when I press the 'install', it would go back to 'free' and because of that I'm unable to download youtube. It's only youtube I'm able to install other apps. But ya, I cannot see the progress bar. Help anyone?

Actually, the app is there, and it asks to PAY AGAIN, that was the issue, but I have just solved the problem using your first advice, as I tried a few times with different names in my account.
For example, you told me to use the same ID...
I have a ONE account, but sometimes I sign in as [email protected] and sometimes I sign in as [email protected] and sometimes I sign in as [email protected] and that made all the difference, as I tried them all and finally with [email protected] worked and gave me the opportunity to download again.
Thanks a lot for the tip.
Luiz

CAnnot see the tree and how to sync users

Setting up a demo network.
1 Novell Netware SBS server
1 Linux SBS server
Installed eDirectory to the Linux box, imanager and everything works fine.
Netware - master replica
Linux - read/write
If the Netware server goes down, we cannot see the tree.
Tried with SLP and without.
creating users in iManager from either server IP works fine and shows up in
Console1
Is there a way that when we add a user to the NDS, that it will create a
user on the Linux server as well? I mean on the actual linux server, not
eDirectory?
I suppose similar to setting DirXML for Active Directory and NDS?

Hi, thanks for your e-mail, pretty much the same deal for me, except one of
my techs is a Red Hat guy, so we had some tech knowledge before testing
this.
Actually, we noted that through ldap, we can see the eDirectory users on the
Linux server under the users section, and we can add them to linux groups
and shares, which through the setup of Samba, can map drives to the linux
server.
you should check out the article I sent along earlier that explains how to
set that up. Very interesting.
>>> <stanch@**.co.uk> 3/4/2006 1:11:31 AM >>>
Hello Robert,
Just so you don't feel alone out there..
A little of my background. I am a Linux newbie, ex MCNE from NW4 days and
run and deploy NW65 im my job. I decided to learn Linux and as I don't use
it at work. I thought the only real way to get familiar with it was to run
it at home. I purchased NLSBS9 and have installed it as the home server
and it runs the households email and Internet access. My users have
resistance to Linux at the desktop so its XPpro for now.
My experiences with NLSBS9..(remember I am a Linux newbie, hopefully if I
tell you something that is incorrect someone will jump in and correct me.)
It appears that NLSBS9 with it's accompanying Novell Linux desktop
licences was conceived as a total package. Linux clients to Linux server.
Windows client support is not so well implemented. For Windows user file
and printer access you need to run and configure Samba. Samba requires
linux users to be created and these are stored in an Ldap directory.
eDirectory is present solely for GroupWise to run, it is not linked to the
LDAP directory. The two directories are not linked or synced in any way.
I thought NLSBS consisted of Suse Linux Open server plus Groupwise.
Apparently not, as Suse has a facilty called LUM (Linux user management)
which is a tool that you can manage users with and it is linked to
eDirectory.
A little birdie tells me an announcement about NLSBS9 and future
developments could be made during Brainshare....
There is a .PDF of nearly 8 mbs. that is a introductory course to
installing and configuring NLSBS9 you can get it by running this url :-
http://www.novell.com/partners/nlsbs...lsbs_final.pdf
NLSBS9, for me, has been rock solid and all issues with it have been
caused by my own inexperienced hands.....GroupWise has performed
faultlessly.
Hope this helps..
Rgds.
Stan Chelchowski

Cannot See the green "+" symbol right beside the yellow "?" in rtkstrt.fmb

Cannot See the button: green "+" symbol right beside the yellow "?" symbol in rtkstrt.fmb in RMS Online.
I had a screenshot of the issue, please feel free to send me a private message so i can show you the picture. Thanks.

Is your battery charged up? If you can access the Internet when plugged in, that might indicate you need to let the battery recharge.

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

Paste from Illustrator to Photoshop, I cannot see the pasted object

Sorry for this dumb question but I have tried everything I can think of before asking this question. I have a single grouped object in Illustrator and I select the object and "Copy". Then I open up a new photoshop project and choose "Paste". Then I get four questions:
Smart Object, Pixles, Path and Shape Layer to choose from. No matter which one I choose I get a large box with an X. I cannot see the object just the box that is x'd out. This must mean something but I cannot figure it out. When I place it dissapears.
Please what is the secret to pasting objects into Windows Photoshop CS4?
Thanks, Brent

Magically, pasting started working. Maybe, my computer was running out of memory or something.
Thanks for your helpful answer.
-Brent

I cannot see the actual pictures on the photos page

Similar Messages

Maybe you are looking for