I cannot send e-mailfrom my 3G. I'm an error rejected by the server because it doesn't allow relaying. Does someone have a fix?
I am getting a server rejecting my email because it doesn't allow relaying. Does someone have a fix?
Thanks.
Head to Settings -> Mail, Contacts, and Calendars and tap on the account having the issues sending email. On the proceeding view, click Account button that lists the email address at the very top of the screen.
Then scroll down to Outgoing Mail Server and make sure the correct outgoing mail server is set as the Primary mail server for the account. Lastly, make sure all other smtp servers listed are turned Off.
B-rock
Similar Messages
-
I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?
There is something else that can cause this issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
I cannot send or reply to emails. I get an error message that reads "A copy has been put in your outbox. The recipient was rejected by the server because it does not allow relaying. Has anyone else had this problem?
Your outgoing mail server settings are incorrect. Go to the settings for the email account and look at the SMTP settings. Most likely you did not enter your user id and password. While it says "optional" that's only from the iphone's point of view; it probably isn't "optional" from the point of view of your email provider.
-
When trying to send mail I get a message the message was rejected by the server because it doesn't allow relaying! I can send mail to myself but not anywhere else.
See the previous discussions on the right side of this page under the heading "More Like This" with your same problem.
-
Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many ThanksThis resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.
-
I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.
The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T. -
"Cannot send mail
A copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying."
How can I fix my email? Now when I try to send an email I get the above message. It was working for months now it just quit on my ipad2, (but it still works on my iPad1 not updated to 5.0 operating system)? Help!?
Thanks,Try going into the account's outgoing SMTP server settings, and if they are not already filled in add your account id and password to the outgoing settings : Settings > Mail, Contacts, Calendars and then select the account the account on the right-hand side and go onto into it's SMTP server settings
-
iPhone 4S. My e-mail service provider is Embarq. I am receiving e-mails, but I cannot SEND/REPLY to e-mails. I get message that recipient was rejected by the server because it does not allow relaying. Any suggestions.
Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11. More Like This section was a great help.
-
When forwarding mail this is what i get
Cannot Send Mail
A copy has been placed in your Outbox. The recipent _________________(email address) was rejected by the server because it does not allow relaying.
Never had this problem before so not sure whats going on. Appreciate any help out there.Sounds like there is something wrong with your SMTP server. Try going into Settings>Mail, Contacts, Calendars>select the email account in question, go to the Outgoing server (SMTP) and check the settings. It may be you do not have a username and password in one of the areas. The phone may say optional in a couple, but it is usually mandatory. You can also try a reset on the device, hold the sleep/wake and home buttons together until you see the Apple logo and then release. If neither of these work, then you will need to delete the account, then delete the SMTP server, then add the account back, ensuring you use your username and password everywhere, even when it says optional.
-
I cannot send outgoing mail because it is rejected by the server because it doent allow relaying
I cannot send outgoing mail because it is rejected by the server because it doent allow relaying
Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.
-
My email is not working properly, I can receive emails but I cannot send them. Every time I try to send an email an error message appear saying "The recipient was rejected by the server because it does not allow relaying". There used to be no problem with my email it has only come up recently. Also, my Internet works fine. I have tryed restoring my iPad to factory settings but it still doesn't work. Does anyone know how to fix it?
try to check the email id of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in
-
I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Question - When I try to send an email on my Iphone4S, it responds "Cannot send mail. A copy has been placed in your Outbox. The recipient was rejected by the server because it does not allow relaying." How do I fix this problem?
Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11. More Like This section was a great help.
-
I can receive emails over AOL but cannot send them. When I do, I get a box that says "recipient was rejected by the server because it does not allow relaying"
That's because you did not enter your screen name and password for the outgoing (SMTP) mail server on the phone. Or if you did they got erased. Go to Settings for the account and enter them.
-
What do I do to be able to send a reply email when the response is it doesn't allow relaying?
Try this and see of you can get the reply to go through.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
How to fix
If this is an AOL issue, try these: go Settings > Mail, Contacts, Calendars > select your AOL.com account > SMTP from the Account Info Page > SMTP from the SMPT Page > make sure that the Server is ON, make sure that the Host Name is smtp.aol.com. Further make sure your username and password are correct and added in the Outgoing Mail server; make sure that Authentication is set to Password and make sure that Server Port is 587
If this is not an AOL email: go Settings > Mail, Contacts, Calendars > Accounts >Account Info > SMPT> turn off primary server, turn on other (e.g. AT&T) SMTP server.
Go into Settings > Mail, Contacts, Calendars > Your Account > Outgoing mail Server SMTP > Primary Server then turn Server ON and fill in both User Name and Password under Outgoing Mail Server.
Maybe you are looking for
-
How Do I Delete My Old Apple ID From My iPhone When That ID No Longer Exists?
I moved, and cancled my internet provider, losing that associated email (email #1). It was the same email I used for my Apple ID. At some point in the unknown past, the only other email adress I have (email #2) was also signed up for a speerate Apple
-
When watching Youtube clips firefox causes windown blue screen - windows 7 on HP8540w
Hi HP8540w laptop with Windows7 professional. when watching youtube clips windows crashes - blue screen of death! watching the same clips in Internet explorer doesn't cause a crash - isolated to Firefox.
-
Can we use content conversion for this structure
Hi, could any one help me on this MT_Type Segment(0-unbounded) field1 field2 field3 Segment 2(0-unbounded) field1 field2 Segment 3(0-unbounded) field1 fiel
-
My Yahoo mail account for the past few days displays as a text page.
I've tried "page styles", but that did not work. I can access my mail through other web browsers, so I know my yahoo mail account is ok. I can send you a screen print of this page. This "text only" occurs on other random web pages. thanks, Chris
-
Which is better when temporarily not using Mac - 'screensaver' or 'sleep'?
I manually invoke a screensaver when I won't be using my MacBook for a while (up to an hour or two) -- instead of putting it to sleep. When I come back to use the computer again, with rare exceptions the hard drive doesn't rev up as it does when I re