I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift command V screen is still stuck

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift+command+V screen is still stuck

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
=======================================
Reinstall - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

Similar Messages

  • HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

    Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
    <Edited by Host>

    What other solutions have you tried?
    This may help you:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

    Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

    Work through the suggestions in this article:
    Mac OS X: Gray screen appears during startup

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • MacBook pro 15" 2008 freezes at apple logo and spinning wheel

    Have a MacBook pro early 2008 have installed lion but recently started to have problems. Started to freeze a lot so I would restart and most of the time it would work untill it froze again , now it's got worst every time I restart my Mac it won't go past apple logo and spinning wheel just freezes have been trying and trying but same thing freezes. Tried to start in save mode but no still freezes
    Please has anyone got any suggestions thanks

    The startup disk may need repairing.
    Use Lion Recovery
    Not enough free space on the startup disk can cause the system to freeze.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

  • IMac is stuck on apple logo and spinning wheel

    My wife did a software update and them it asked for a restart, she click restart but the computer got stuck in apple logo and spinning wheel. Won't go past that now. Just keeps spinning! Help for I know not what to do!!!! Please any idea?

    An invalid node is an error DU cannot repair. If you don't mind spending $100 for Disk Warrior, then I suggest you buy it because it can fix the error. Otherwise, do as the warning says. Backup your files. You will then have to erase the drive and reinstall. The procedure is:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Please help me! MacBook Pro stuck on apple logo and spinning wheel

    Hi I'm really desperate and need help! My MacBook just stopped loading and would stay on the gray screen with the apple logo and spinning wheel.
    I have tried safe mode and it would load a little and stop and then the loading bar would be blank and it would stay like that forever!!
    I also have tried doing the single user mode and when I type the fsck - fy it will do a couple more lines then it will say error like a hundred times :(
    I did verbose mode and it would just give me stuff that I have no idea what it saying I left on verbose mode for like 5 hours and it would just give me lines of stuff I have no idea what it's saying!
    I downloaded lion through apple store so I don't have the disk I only have my snow leopard disk
    Please please someone tell me a solution it's my moms laptop and I don't want to get in trouble!

    Reboot in recovery mode an possibly repair over the internet.
    Command-R to the rescue.
    Just hold down Command-R during startup and OS X Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of OS X, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if OS X Recovery encounters problems, it will automatically connect to Apple over the Internet.
    http://support.apple.com/kb/HT4718

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Apple logo and spinning wheel after hard drive replacement and restore

    Hi, need some help!
    I replaced my hard drive at the weekend in a mid 2010 MacBook Pro with a Samsung/Seagate 1TB 2.5 inch 5400RPM SATA II Hard Disk Drive.  The install of the hardware went fine, and the computer recognised it no problem.  I went through the process of formatting which again went ok, then I moved on to the restore of the old image from my time machine.
    After the 4 hours or so it said restore successful and a restart was required - after the restart I am presented with the apple logo and spinning wheel and can make no progress beyond this point.
    I have tried 3 restores now - all of which were 'successful' and have the same issue.  I have checked the disk using the repair tool and there are no recoded issues so I'm at a loss.
    Can anyone help!!
    Thanks in advance

    Hey andrew1878,
    Thanks for the question. I understand that you are experiencing issues with your MacBook not loading up past the Apple Logo and spinning gear. The following resource may provide a solution:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Thanks,
    Matt M.

  • My macbook wont reboot apple logo and spinning wheel thats it.

    I watched youtube videos and tried command r and now it keeps popping up you need to restart your computer. Everytime I restart it, it pops back up! HELP!!

    Apple logo and spinning wheel is different than the need to restart your computer message.
    See this Apple note on the spinning wheel at boot. If you are running OS X 10.7 or later, then rebooting with the command and r keys will get you into recovery mode, where you can use Disk Utility to repair the hard drive.
    FYI, the need to restart your computer message in multiple languages is called a kernel panic, which is usually, but not always, caused by a hardware issue. If you have OS X 10.7 or later, you should be able to run the Apple hardware test. Prior to that, you need the disks that came with the system to run it. If you can run it, run the extended test when prompted, which can take over an hour to run.

  • I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

    I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

    Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
    Run through this list of fixes
    Step by Step to fix your Mac

  • Macbook Pro Stuck at Apple Logo and Spinning Wheel

    I Have ML.  Just did the most recent update.  There seemed to be a bundled group of updates.  Once all was updated, my computer froze.  I shutdown and restarted and it was stuck on the Apple Logo and spinning wheel.  I have tried everything.  Safe Mode, Command R, Command/Alt/R/P....it does nothing.  Any advice out there?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Mac Mini won't boot past Apple logo and spinning wheel

    Hello,
    I have a Mac mini (late 2009) running 10.8.2. Today, I tried to log into the computer. It accepted my username and password, but then the screen turned gray instead of logging in. I left it like that for about twenty minutes, then gave up on waiting and Ctrl-Command-Power rebooted it. It then wouldn't reboot: it gets to the Apple logo and spinning loading wheel, but won't go past there.
    So I went into single-user mode and was able to access the HD fine. I ran a filesystems check using the recommended syntax (/sbin/fsck -fy, I think). It said that the volume looked okay, and that it had been modified. I took this as a good sign (that it had been repaired) and typed "reboot" to restart the machine. I held Command-Shift-V to perform a Verbose Safe Boot.
    The computer makes no further progress after the following four lines:
    vboxdrv: fAsync=0 offMin0x809 offMax=0x2bc3
    VBoxDrv: version 3.2.12 r68302; IOCtl version 0x140001; IDC version 0x10000; dev major=34
    VBoxFltDrv: version 3.2.12 r68302
    VBoxAdpDrv: version 3.2.12 r68302
    I'm assuming all the instances of "vbox" are in reference to Oracle's VirtualBox VM. I do have VirtualBox installed, but haven't used it in a while (months), so I don't see why it's suddenly causing a problem.
    To clarify, the computer doesn't "hang" after these lines: I can still type text into the terminal. The entire log is being saved to /dev/console, so I could probably grab it from Single-User Mode if necessary.
    Everything else seems to be working properly: even the wl0 drivers are loaded.
    Does anyone have any suggestions about how to fix this, or at least disable VirtualBox so the computer can start?
    Thanks!
    WC

    Cult of Mac post:
    When the Apple Logo appears your Mac has found a valid system disk, and Mac OS X begins loading.
    Apple Logo with Spinning Gear
    Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers.  Shortly thereafter it transfers command to the almighty (and controversial) launchd process.  Such are the workings of UNIX.
    What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation.  It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
    Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally  Hold down the Shift key at startup to boot in Safe Mode.  DiskWarrior is also worth a shot (this is by far my most used disk utility).  If that doesn’t work, an Archive & Install may be needed.
    Read more at http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/#CGI mG3jeGEBtysX1.99

  • Macbook won't boot past grey screen with Apple logo and spinning wheel.

    For some reason, after about 1 year and 10 months of owning my Macbook, it decided this morning not to load past the grey screen with the Apple logo and spinning cog/wheel.
    I used it for a couple of hours beforehand, and it was working fine. Software Update prompted me of about about 4 or 5 updates; I can't remember exactly what was downloaded, but I think there was a Security Update and iTunes among them. I restarted, left it to install with no errors, but when I logged in, Safari and iTunes were running incredibly slowly. I also noticed that the volume keys weren't responding, as well as the power key to bring up the "Sleep, Restart, Shutdown, etc" dialog box. I forced shutdown, hoping a restart would solve my problem, and that's when my troubles started. I originally just left it, but after about an hour the wretched thing was still spinning.
    So far, I have done a number of troubleshooting tips on a variety of websites. I have tried taking the battery out and holding down power for 5 seconds, resetting the PRAM with option, cmd, p & r, and holding down power until the sleep light flashes rapidly and the computer lets out a large "BOOOP".
    I have booted off my Leopard install disk with both option and c, repaired the hard drive a number of times, with there being no errors whatsoever. I have tried repairing permissions, but everything seems to freeze up, except the mouse.
    For some reason my computer will not boot into safe mode, either, and holding cmd & s at startup doesn't get me to the stage where I can enter commands with the keyboard.
    Unfortunately, because of my puny 60GB hard drive, I only have 1GB of free space left and cannot reinstall Leopard without wiping my hard drive.
    I would greatly appreciate it if anyone could assist me with this unfortunate dilemma. It's such a shame that my computer has been fantastic for so long and now decides to play up. (Maybe it's just Apple trying to get me to buy a new 2.4Ghz aluminium Macbook sooner than I was planning...)
    Thanks very much.

    Hi ds,
    Sorry to hear you're having such trouble!
    Unfortunately, the best thing you can do at this point is reinstall Leopard (and then attempt to install the combo updater, too). If you don't have a backup of your machine, you could boot it into Target Disk Mode (by holding down T at startup) and then attach it via FireWire to another computer to salvage your files.
    I recently had to repair a machine with this exact same problem, and after messing around with that for several hours, I'd have to say that I think that an Erase and Install is the way to go. If you then migrate over your user data and start having troubles, you at least know where the problem lies. I suspect, though, that having a clean machine with all of the new updates applied will be the end of the issue.
    Sorry to be the bearer of bad news. There are a few other things you could try first; you could, for example, manually download the relevant combo updater from Apple's website and attempt to install it to your damaged machine while it's in Target Disk Mode. If you have a copy of Disk Warrior, that too is certainly worth a shot (and in some cases may be the saving grace). In my experience, though, a failure of this magnitude isn't easy to resolve.
    Hope that helps.
    —Hazy

  • My MacBook Pro is stuck on grey loading screen with apple logo and spinning wheel.

    PLEASE HELP - Tried to start up my MacBook Pro and I get grey screen w/ apple logo &amp; spinning wheel. It's stuck on this screen. Safe mode didn't help but reveled this: smc read key action error, BOOS key failed, BOPS key failed. Consider rebuild of prelinked kernal com.apple.kext triggers triggered rebuild. IOBluetooth host controller USB transport Suspend Device. I ran verifications/repairs in Disk Utilities, but nothing came back wrong on the reports. I'm a bit panicked, as I use this computer for work and have no other computer to use in the meantime. I should also note that I have very little technical knowledge, so if you can lend your help please keep that in mind when responding. I'd be over the moon if anyone can help.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

Maybe you are looking for