I cannot use my iPad. The screen is black with only the circulating dowmnloading symbol showing and I cannot switch it off to re-boot. If I try to connect to iTunes it says it could not connect because o an unknown error 0xE80000065, but I can't turn it

I cannot use my iPad.
It presents a black blank screen with just the circulating symbol in the middle.
I cannot turn if off or on to re-boot it as the on-off swith does not respond, neither does the press button on the bottom edge of the pad.
I have tried to connect it to iTunes but my computer (running Windows Vista) shows an error message 0xE8ooooo65.
Previous to this complete shut-down I had successfully connected to iTunes and tried to download the new 4.3.3 (?) Update.
This showed it would take four hours ! So it was left to do just that.
However it then went back after thfour hours it said it was backing up my files, but then shutdown.
Can anyone help?
Shirley

http://support.apple.com/kb/TS3281

Similar Messages

TS1372 Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks

Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015

HT1414 when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

Try using DFU/Recovery mode to restore
1. Plug iPhone 4 to computer
2. open iTunes
3. Turn off iPhone
4. Press home and power button for 10 seconds
5. Stop pressing the power. Button but keep pressing down the home button
iTunes should say the following; "iTunes won't be able to use your iPhone until you restore your device"
Then you'll have the option to restore and it should work, it has worked for me in the past

HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?

My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?

iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

HT201210 My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015

The itunes stores said we could not complete your request an unknown error occured how do i fix this?

The itunes stores said we could not complete your request an unknown error occured how do i fix this?

Hi The99reddragon,
Thanks for visiting Apple Support Communities.
You may have been affected by this system issue that occured:
Multiple Services - 10:23 AM - 12:54 PM - Some users were affected
Users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Users may also have been unable to access iTunes in the Cloud, iTunes Match, or restore purchases from an iCloud backup.
From Apple Services, Stores, and iCloud.
If you're still not able to complete your iTunes store purchase or download, see this article for some troubleshooting steps that can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best,
Jeremy

When I open iTunes it opens to my library but it won't let me connect to iTunes store says I'm not connected to internet but I am

when I open iTunes it opens to my library but it won't let me connect to iTunes store says I'm not connected to internet but I am

Use the alt key to create a copy of an Arrange section by dragging it.

Flash export MOV could not complete because of an unknown error. Please help.

This problem has come up in the forum a few times and no solutions are given. Hope you can help.
I am running Flash Pro CS6 and want to export a MOV file. The export seems to work as it should until after building the audio track, and then I get an error:
Could not complete the operation because of an unknown error.
My settings are:
Quicktime is H.264, frame rate: current, quality: high, multi-pass: yes
Audio: MPEG-4, AAC, 44.1 KHz, 16-bit mono
Stop exporting after time elapsed

You can use either AVI or MOV but MOV will give you a bit of lossless compression (small file size reduction over uncompressed AVI).
What I mean by lossless is try exporting to MOV, in the video settings set the codec to "Animation", keep the colors at RGB (Millions) or if you need alpha then RGB+Alpha (Millions+). Keep the quality set all the way to the highest. Then go in audio settings and choose anything you like. Export the movie.
Now take the very large MOV file it made into Adobe Media Encoder. Once it's imported, choose a preset (H.264, etc) and choose your desired compression settings. You will see there are a lot more compression settings. Also set your audio options. Then when you're done customizing your preset just click the green start icon and let AME compress your high quality source to a much smaller file size.
Just clarifying, after you import your video in AME and you choose your preset you have to click the presets orangeish hypertext to customize the presets settings. It will not overwrite that preset so don't worry about what you change. Pay special attention to the bottom of the custom settings panel because it lets you see the output file size. Adjust your quality controls until you hit the file size you want (both video and audio). You also have a preview panel so you can see the output at any part of the timeline using those settings.

The plugin could not complete because of an unknown error

I keep getting this error message ever since yesterday using AI CS4. On Friday it was working fine, opened it up yesterday and this happened. It happens when I select certain tools such as rectangle (or any shape tool), magic wand and you cannot use the tool. Happens also with both new documents and existing files - Once the error pops up, you click ok and it pops up again...and again, every time you move the curser (only way I've found to stop that is to move the curser up to the top of the page and press enter then select a different tool. How do I get rid of this and get my tools working again?
Thanks in Advance!

Pokie,
For sudden strange cases, you may look at this general list (5) is hardly relevant in this case):
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool if you have CS3/CS4/CS5/CS6/CC, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT201210 Getting this = "The iPhone could not be restored. An unknown error occurred (1)" What can I do next? Has new OS and new iTunes... it's an iPhone 3GS

All of a sudden my iPhone 3GS gave me a message about setting "Location Services" I think? anyway, when it failed a few times, I was then directed to "restore" my phone. tried that and POOF!!!! could not be restored. Now have a cute little paper weight, but would like to convert it back to a phone. Any help?

Error 1 is a very bad Hardware Error of the Baseband Chip. There is no fix. If you have Warranty or AppleCare Coverage, make Genius Reservation and take iPhone to Apple for resolution.

I can watch my custom DVD in iDVD 7 preview but burnt dvd plays back black with only the audio

I can watch my custom created DVD in iDVD 7 preview but once the disc is burnt and I play it back in DVD Player, the screen is black with only the audio playing back. I have tried using three different blank DVD manufactures.

Hi
Most probably depends on what movie codec You feed iDVD. May be You find any clue here.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

How to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

how to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

You can't resolve the issue. Your phone is bricked.
This is the error message that happens when you try and update a jailbroken phone.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum.
You need to buy another phone.

The iPhone could not be restored. An unknown error occurred (47)

I have an iPhone 4S. It is now stack on a black screen with a USB sign to be connected to iTunes. The phone keeps showing this massage until the phones battery finish. When I connect it to iTunes after spending sometime it gives me an error that the iPhone could not be restored. En unknown error occurred (47). Can anyone help me to find a solution for that ?

Hi, I found nothing. Only one link addressed the same problem and he found no way to fix it even after talking to apple's support people.

TS3694 The Ipad "Ipad" could not be restored. An unknown error occured (3014) how to fix

I tried updating my Ipad to ios 6 and got a error while during the process and now it says I have a Ipad that needs to be restored if I click restore I get The Ipad "Ipad" could not be restored. An unknown error occured (3014) how can I fix this issue I updated Itunes to newest version and tried to hold down sleep/awake and Home button to reset Ipad and tried redownloading software onto another user itunes same thing please help thanks.

Place the iPod in recovery mode and then try to restore:
http://support.apple.com/kb/HT1808
Also see here:
http://support.apple.com/kb/TS3694

The iphone could not be restored. An unknown error occurred(29).

Hey, I have not had a pc for around 4 months and finally got one yesterday, decided to upgrade to 4.1 and came back to find my phone in recovery mode and no error messages on the screen. When trying to restore the phone I get.. The iphone could not be restored. An unknown error occurred(29). Can anybody help? Thanks
not sure on

My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but in the p.m CRASH!! Have tried to restore it 7 times but continually get various error messages starting " Itunes could not perform a restore due to an unknown error" The error message numbers varied from (1009), (1002), and (20000)!!!!!??????????
My iTunes version is up to date. I have performed all the trouble-shooting tasks including trying to restore on a different pc without success!!!
Please help.
Regards,
Ciaran

I cannot use my iPad. The screen is black with only the circulating dowmnloading symbol showing and I cannot switch it off to re-boot. If I try to connect to iTunes it says it could not connect because o an unknown error 0xE80000065, but I can't turn it

Similar Messages

Maybe you are looking for