I cant access to database_homepage in localhost:8080. This requests user ps
Hi, Ive a problem at the moment of open the database_homepage, the explorer says "The server localhost:8080 requires a username and password. Server Message: XDB." Ive Oracle Express Edition v11g release 2, but above I had Oracle Enterprise Edition, however before of install the XE I uninstall The full Edition.
I installed this on Windows.
The error is:
https://www.dropbox.com/s/ie32ez1p1aiir2x/issue.bmp
Help me please.
Thank you.
Try:
http://127.0.0.1:8080/apex
(exchange 8080 for actual port number from your installation)
If that fails, post output from :
lsnrctl stat
Edited by: orafad on Sep 4, 2012 4:00 AM
Similar Messages
-
Hello I have just sold my old macbook and so transfered all my data to my newer macbook using transfer manager. This allowed my to login on the newer computer under either the old or new username so I could access both computers' data on my newer computer. Last night that worked but today I can only access my newer user and a guest user. Where did my old user name and all the data go after the transfer? Help please! I have to give the buyer the old computer today!
AminahI am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
Best of luck. -
After upgrade APEX to version 3.0 I cant access the link apex_admin
Hi,
I made a new installtion of OracleXE. After that I upgrade it to APEX 3.0 on this way:
- Editing the ..\apex\coreins.sql script
........ On line 573 you need to set the XE variable to 1 for XE installation:
........ define XE = '1'
- sqlplus "sys/syspass as sysdba" @apexins password SYSAUX SYSAUX TEMP /i/
- sql> @apex_epg_config.sql d:\ (the APEX-installationfiles are under D:\apex)
- Update OWA-Packages with @owainst.sql
- Shutdown und startup the database
After that I can access the link http://localhost:8080/apex, but I am not able to access the link http://localhost:8080/apex/apex_admin - I got the message HTTP 404 Page not found.
I had already drop the schemata FLOWS* and reinstall APEX 3.0, but this is the same.
And if I try this:
http://localhost:8080/apex
and login with workspace INTERNAL, I got this:
application=4050 workspace=10
Error ERR-1014 Application not found
The installation-logfile shows me no errors.
What is wrong here?
Regards,
Mark
Edited by: Eisenbahn-Bundesamt on Aug 25, 2008 1:52 PMI've only used the 3.0.1 upgrade and I can't say I had to do all those changes you've mentioned, I just used the installation guide. However I did my upgrade under Linux, you post indicates that you're using Windows (the D:\ gave it away ;-)) and I've got no experience in installation/upgrades there.
C. -
TS1702 forgotten password on ipod touch cant access
Hey can anyone help - ipod touch access password has been changed and now can't access it - displays Ipod disabled connect to itunes - and still cant' access what do I do?\
This is asked and answered quite often. You can do a forum search ( right side of this page) and find the answer many time over, such as:
https://discussions.apple.com/thread/2790018 -
Cant access my Database with the new user I created
Hi,
I creatred a database using All Programs> Oracle OraDB10_home1> Configuration Aand Managing Tool> Data Base COnfiguration Assitance. My DB name is MYTestDB. Then I created a user trough http://localhost:1158/em my user name is testuser and password is testuser. I cant login into my DB when I use
sqlplus testuser/testuser@localhost:1521/MYTestDB also using SQL Developer I cant login. I keep getting message invalid username and password. However if I use this commad sqlplus system/system@localhost:1521/MYTestDB works fine also sqlplus testuser/testuser@localhost:1521/orcl It works fine. Any help will really be appriciated.
Thanks
Asgaruser1096243 wrote:
When I create a user there is no way where I can select which DB this user belongs, or is there one?
Thanks
AsgarIf you are going to work with EM (dbcontrol) in this manner -- with multiple databases -- you have to configure a separate instance of dbcontrol for each database. A given instance of dbcontrol can work with only one database instance. The distinction in accessing the dbcontrol is that each one will have its own port. -
Please, I have installed Tomcat and mySql twice in my C hard disk and then in my E hard disk, and i have desabled my UAC permissions as I have a Vista OS.
My problem is that I could access my localhost:8080, just once in any installation but then I couldn' t be able anymore, like if I had to install again everything anytime to can access localhost:8080, do you know why?LILLA wrote:
My problem is that I could access my localhost:8080, just once in any installation but then I couldn' t be able anymore,When you try to access localhost:8080 after the first time, what is the error that you get?? Are you running your vista from an administrator privilege user?? Are you getting any error on tomcat startup?? -
Cant access router's login page
my macbook cant access the router's login page,but i cant access the internet through this wifi
here is some info i think may be useful
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 80:e6:50:00:a0:c6
inet6 fe80::82e6:50ff:fe00:a0c6%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:20
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:21
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:e6:50:00:cc:00
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 5 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
nd6 options=1<PERFORMNUD>
media: <unknown type>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 02:e6:50:00:a0:c6
media: autoselect
status: inactive
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.2.1 UGSc 28 0 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 34 2643545 lo0
169.254 link#4 UCS 1 0 en0
169.254.71.63 74:2f:68:73:6d:e UHLSW 0 0 en0 281
192.168.2 link#4 UCS 2 0 en0
192.168.2.1 94:c:6d:30:49:de UHLWIir 29 178 en0 1029
192.168.2.101 localhost UHS 0 0 lo0
192.168.2.102 74:2f:68:73:6d:e UHLWI 0 0 en0 290
If some people cant help I'll really appreciate.What I did was a hard reset... (hold reset for 10 or 30 seconds then while holding, unplug unit then release reset button. After 10 more seconds, plug unit back in.)
Between that and using the TFTP program, I was able to get back into my management screen. You will have to reconfigure your router after that. Be sure, if you have a dedicated ip on your computer, you temporarily set it to obtain everything automatically incase your set ip doesnt correspond to the default settings for your router. Then once everything is back up, you can change you ip settings on your PC back to what you had, if any. -
Asa 5505, the outside cant access to a server in the inside
hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...
this is my conf:
ASA Version 8.0(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 0
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.1.1.2 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa804-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list 100 extended permit tcp any host 10.1.1.3 eq www
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
<--- More --->
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-613.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255
access-group 100 in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
<--- More --->
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
<--- More --->
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:14e7b74fabc386613ae646b915f60e9e
: end
ciscoasa#Andres
The security level for your inside interface should be 100 ie.
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
After changing that can you
1) ping the outside interface of the ASA from the pc or ping the PC from the ASA
2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?
Jon -
Why i cant access asa 8.4 thruogh asdm from outside interface ???
hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endFor access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first. -
Cant access to the integrated web browser RG60SE
Hi. I recently bought a RG60SE router. Following the instructions in the quick manual i tried to configure it, but i cant access to the integrated web based configuration utility. I tried access from three diferent pcs with same results. I tried to access connecting only the router and one PC, without ADSL modem, but not results.
I tried to reset, plug, unplug, power off, power on, the PC and the router, in many combinations, but i have zero results.
Im very frustrated, may be im doing something wrong?
I have a one desktop directly connected to ADSL modem:
IP 192.168.1.2
Mask 255.255.255.248
Gate 192.168.1.1
DNS1 200.105.128.40
DNS2 200.105.128.41
Please, i need help,
ThanksThanks for your answer:
Yes i am using http://192.168.1.1
I have an another router D-link dir-400. When this router is resetted, i can see a d-link wireless signal within my notebook. But i can not see anything about MSI router. -
i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.can you tell me the solution to "windows cant find firefox" error. thanks.
-
I cant access the root share of a windows server after upgrading to mountain lion
Hi Guys,
Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
"The operation cant be completed becuase the original item for "/" cant be found"
I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
This was working fine before the upgrade. can anyone help??well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth -
I didn't know about 90 days rule. I associated iphone with my other Apple ID by mistake. Now I cant access my iTunes match. What to do expept waiting for 90 days?
Hi
Try contacting Apple support Contact Apple for support and service - Apple Support
Jim -
i cant access my iphone 4s because i wiped the icloud account so now it wont reconize my apple id can anyone help me access my iphone
Hi chelcon2013,
You will need to change the Apple ID on your iPhone using the steps in this previous thread -
How do I update the Apple ID used on my iPhone?
https://discussions.apple.com/thread/5231672
Thanks for using Apple Support Communities.
Best,
Brett L -
How can I authorize and access my itunes account on a new computer if I cant access my old computer to enable home sharing
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
To deauthorize a computer you don't have:
De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
For more information on authorization and de-authorization: iTunes Store- About authorization and deauthorization.
Maybe you are looking for
-
Is it possible to circumvent read-only after a pdf has been signed?
Hi, my pdf has a signature field. In the signed event I have make all fields read-only. Is it possible for someone to come along and make them not read-only anymore? It seems the easiest way to make my document tamper-proof. Thank you.
-
my iPad mini is displaying a padlock with a circled arrow around it. what does this mean?
-
Will a 6gen audio jack for ipod classic work if installed into a 5gen ipod classic?
i think i might of ordered an ipod 6 gen audio jack and hold button for my ipod classic 5 gen and when i installed it it makes the clicking noise when the wheel is spun but when i want to listen to music it wont send audio through my headphones or an
-
Biller Direct Agent Mode error
I am currently trying to setup Biller Direct to show the Agent Mode. Below are the steps i haven taken: 1. Changed the XCM mode settings to Agent Mode: epbbmode = OA 2. Rebooted the Java Instance 2. Added the security to SAP User ID - We have givin
-
I lost contacts, messages, photos as lots of people have....
I see all these posts here at the apple support community but no help from Apple to fix these issues. I have had upgraded before with no issues so I felt this would be the same. To my surprise, everything was missing. Apple, please help us out her