I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please
i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
i updated my ipad in ios 6
Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.
Similar Messages
-
HT1414 dont know what to do. i cant open my ipad. it just turned off. help me pls. thank you
dont know what to do. i cant open my ipad. it just turned off. help me pls
If you are sure that the battery didn't die on you and that the battery has some power left in it, reboot the iPad and see if it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please
Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen -
What to do if i cant open my screen even i turn on the button
i cant open my phone anymore
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
my iphone can not start,keep want me connet to itunes.i try so manny time still not working.
Hi kokksee,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy -
My iPod will turn on, but will not work at all. (please help)
ok i know about ipods, and this issue is not something that i have come across. when i plug in my ipod to my pc a screen shows on my ipod saying "do nto disconnect" i dont, i want until it is loaded. then the folder with a "!" pops up, and i read on www.apple.com that i am supposed to try the 5 w's, and i have tryed all 5 w's 3 times each. nothing works, nothing. when i click start and click all programs and go to ipod then i click ipod updater i cannot restore my ipod because a message pops up saying "The attached iPod model is not supported by this application." someone please help me.
Download and install the newest software if you have not already done so. See my post above for the links. After you have done this, try putting the iPod into disk mode and restoring.
iPod Updater 2006-03-23
www.apple.com/ipod/download
iTunes 6.0.4
www.apple.com/itunes/download
Putting iPod into disk mode:
http://docs.info.apple.com/article.html?artnum=93651
Restoring iPod:
http://docs.info.apple.com/article.html?artnum=60983
Best wishes,
CG
PS- What do you mean when you say it will not allow you to right click on it? FYI- Sometimes when there's something going on with your iPod's hard drive, it takes a really long time for the computer to respond to commands for it. So, if you're right clicking and then getting an hourglass, please be patient. You'll get there eventually. -
I have mac book pro, 15inch server color, 2008 modal, few days before I was watching movie at the same time I was chating on face book, suddenly my mac stuck so I just tried to force shutdown, by pressing shadown key for 7sec, and after I try to turn on, but nothing comes on display it's black ad if it's off, but laptop fan is on the led is on its heat is as if it's working, after I tried to reset then it's started making beep noses for ten times and again same thing nothing comes on display black, but sounds like fan is on and led blink, please help me
Hi Aparana.rahul,
The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
OS X Mavericks: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH14206
Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
Thanks for using Apple Support Communities.
Best,
Brett L -
PLEASE HELP ME.
No need for the caps.
If iTunes prompts you to restore your phone, then that is your only choice. Just follow the instructions iTunes gives you.
If its not turning on, hold down the power and home buttons at the same time until the Apple logo appears. Then you will be asked to restore your phone in iTunes. -
I cant open my ipad i forget my password
i cant open my ipad i forget my password
Follow the instructions here:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
ipod was disabelled and needed connecting to itunes, with countless attempts nothing happend therefore performed as reset, now instead of turning on and off, ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
After updating iOS I cant open my iPad for requiring 4 digit passcode
After updating iOS I cant open my iPad for requiring 4 digit passcode which I did not make it before. Pls. tell me the solution to open the iPad.
Abontika ShahaFORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Cant open my ipad 2 after i upgrade it to IOS 7.1 what will i do
i cant open my ipad 2 after i upgrade it in IOS 7.1 what should i doipa
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
In our organisation SAP BW and BO XIR3 (3.1) has been installed. And SSO being implemented between both the system . User accounts are created at BW level which were used for BO even. We have maintained authorisation by hierarchy at BW side and wante
-
Using Canopus ADVC110 analog to digital converter. VTR on. Dipswitch 2 is on. Camcorder is NTSC. Using RCA cables to connect to front of Canopus. 9pin firewire on MacBook Pro to 6pin firewire on back of Canopus. Held the input select button for 25 s
-
Bank Account number duplication in IT0009
Dear Team, We want to stop the Bank Account number duplication in IT0009. This is regarding the updating the Infotype 0009 for a personnel number in PA30. While updating a bank account number for any employee, system has to check whether the same ban
-
LG 42LH40 tv - how to hookup to home stereo receiver / speakers
Want to play my new LG 42LH40 thru my home stereo receiver / speakers. There are only a few plugs and I think I have tried them all. Any H E L P would be GREATLY appreciated. Thank you , Roger Solved! Go to Solutio
-
I created a project and gave Project Name : J2ME Class name : HelloJ2ME Then on clik of the create Project Button i got display on the Sun Jave(Tm) Wireless ToolKit 2.5.2 for CLDC-J2ME editor as Creating project "J2ME" Place Java source files in "C:\