I cant see any thing on my screen

i cant see any thing on my screen

Charge the iPod battery for at least 2 hours, there wont be any sign of life for the first 30 minutes of charging, so be patient, then the screen will display a charging sign and "do not disconnect" sign.
After charging till full charge, preferably 4 hours
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

Similar Messages

I cant see any thing any SAP MMC for my XI server.

Hi All,
I cant see any thing any SAP MMC for my XI server.
I checked the services SAPXID_00 and SAPXID_01, those sevices were not running. when i try to start the service I am getting error 1067: The process terminated unexpectedly. I have uninstalled and reinstalled the service with sapstartsrv.exe but no luck.
I have also check SAP Note 82751
when i checked the log sapstartsrv.log, I saw this error
MSETCLXIDEV\xidadm is starting SAP System at 2011/01/17 16:16:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Error: 13, Open Logging-File "sapstart.log". EACCES*: Permission denied OR: The data is invalid.
Please help to resolve this issue.
Thanks
Rehan
Edited by: Rehan Manzoor on Jan 19, 2011 12:39 PM

Hi,
Is it that there is no entry in SAP MMC for the system? Can you try to manually add the System in SAP MMC and check?I or is it that the system is already added and there is no info in SAP MMC. It is possible that the MMC is not working properly. You can reinstall the SAP MMC or better install the latest one. If the SAP MMC is not the issue here then it is possible that tthere is a some permission issue involved here.Could you check the whether the user with which the services are being started have correct permissions or not.
I had an issue where my SAP MMC was installed in a windows system and my SAP system was in Linux(Redhat). And because of the firewall and a security feature called SElinux my SAP MMC was not showing any information.There was a similar issue where i had to upgrade the LM tools. You can download the latest Lifecycle management software from SMP.
Regards,
Jyotish

Cant See Any Thing in Designe View

cant see any thing in the design view of my flash builder for most of my project custom componants and main app whin i use the latest night builds or the last 3 builds
plzzz help

Please file a bug and attach your workspace log. C:\Users\username\\Adobe Flash Builder 4\.metadata\.log. Post the link here when finished.
Jason San Jose
Quality Engineer, Flash Builder

Cant see any video only white screens in Viewer and Canvas

I dont know if anyone has encountered this figured out how to resolve it yet. In FCP 7 on Snow Leopard when i drag a clip into viewer or try to edit in the Canvas all i see is a white screen. The title safe lines and wireframe show up when i turn these on and off, but no video. I occasionally get a solarized image in the Canvas. the time code progresses, but nothing in either window.
Thanks for any insights.

Thanks for all the suggestions, including links back to earlier discussions. This did shed some light, (and kicked me to be more explicit), when reviewing an earlier question on the same issue, but stating that this happened on an external Dell 2408 monitor...which is what I am using to edit. When i open the MBP and remove the video miniport cable and try to play on the laptop display, all is well, I can see video in both Viewer and Canvas. When i plug the monitor back in and drag these windows over to the monitor (cant move the FCP application wholesale) they also play fine. When i close the MBP, wait and refire it up with mouse or keyboard...I see video in both, but when i play either one the image jumps back and forth, cycling from one frame and back...while the time code advances and the audio track does too.

HT1551 cant see every thing on the screen as its expanded too much have already tried my tv settings on zoon 16.9 4.3 etc but still the image is too expanded for the tv can you help

My apple tv image is to big for the screen and have tried changing the tv view 16.9 auto 14.3 etc but this does not change it, Is there a setting in the apple tv itself that can resolve this Please help
BB

I agree with Harm on both points. You should turn off cropping completely if you're going from a DV source (which you are) to an MPEG-2 DVD output (which you are). Just click the Crop button "off" on the Source tab.
If you're seeing weird distortions on some television/DVD players, you may have the aspect ratio settings set improperly in the DVD players themselves. Typically, these settings need to be changed when you're viewing anamorphic (16:9 widescreen) DVDs; you change the setting to match your display preference to your television. Sometimes, the settings are not correct, and will result in unwanted stretching. This isn't necessarily the problem you're up against, but it might be something to check if things don't look right. Other than that, everything looks more or less correct in the export settings.

Turned on my ipad,dark screen lights up but cant see a thing... can anybody tell me how to fix this

Just turned on my ipad 2 wi-fi , black screen lights up to lighter black but I cant see a thing on it... does anyone have any ideas on what's wrong with it?

Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen

Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards.

Ipod screen gone white i can not see any thing?

some time my ipod touch screen gone white i can not see any thing but i can leson the sound every thing is working. so what i do for solve this problem?

Hi,
Try a hard reset of your iPod: Press/hold the home and sleep/wake buttons down until the Apple logo appears.
Hope this helps!
---likeabird---

My iphone recently fell and now my screen is damaged,i cant see a thing but it works, if i backup my data to iclouds would i be able to get back all my messages in like whatsapp when i get a new iphone?

i have an iphone 4s, it recently fell now the screen is damaged i cant see a thing its not cracked, if i back up to icloud would i be able to get back my messages from whatsapps

did you turned on keychain and documents turned on if that is on you can get back your chat history....

Itunes sidebar stuck on full screen so i cant see any of my playlists

my itunes sidebar is stuck on full width and it will not close or shrink so i cant see any of the music in my playlist helppp !!
?

I had the same problem. I was able to go to my podcast section, change the icon size, then when I went to my music section my tracks were displayed. Hope this helps!

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

FOR YEARS IVE USED THE FIREFOX ADDON GOOGLEPCK WITH PCTOOLS NOW I CANT SEE ANY SIGN OF IT AND EVERYONE SEEMS TO NOT EVEN HAVE EVER HEARD OF IT. AS IF THE LAST 3 YEARS OF MY LIFE WERE A DREAM. WHATS THE DEAL?

FOR YEARS IVE USED THE FIREFOX ADDON GOOGLEPACK WITH PCTOOLS/SPYWARE DOCTOR. NOW I CANT SEE ANY SIGN OF IT ON THE ADDONS LIST AND EVERYONE SEEMS TO NOT EVEN HAVE EVER HEARD OF IT INCLUDING THE ZOMBIES AT PCTOOLS SUPPORT CHATLINE. AS IF THE LAST 3 YEARS OF MY LIFE WERE A DREAM. WHATS THE DEAL?

TO THIS:
on support.mozilla.com:
This could be what you are looking for -
http://www.pctools.com/spyware-doctor/google_pack/
Try Googling -'' google pack +pc tools +spyware doctor'' which is where you might reasonably have started.
Nothing to do with Mozilla, though.
'''the-edmeister''' has helped thousands of people here and on other forums. He deserves considerable respect and offers good advice on your behaviour.
SINCE I CAN LOGIN TO MY ACCOUNT I OPED ANOTHER. JJBOY AND BOBPC = SAME.
ALREADY EXPLAINED THESE SITES DO NOT HAVE IT YOUR LINKS ARE BOGUS. THAT MEANS THEY HAVE NO CURRENT VALUE. IT USED TO BE CORRECT BUT ISNT ANYMORE. THE LINKS ARE OUT-DATED. THERE IS NO LINK TO DOWNLOAD THE GOOGLE PACK FOR FIREFOX WITH FREE PC TOOLS ANYWHERE . THERE IS NO SEARCH ENGINE THAT DOESNT LEAD ON THE SAME JOURNEY TO THE END WHICH IS THAT THERES NO DOWNLOAD. END OF THAT STORY. IF THERE IS A REAL TRUEFULL PLACE WHERE A PERSON CAN DOWNLOAD AND OLDER VERSION THAT APEARS TO BE THE ONLY THING LEFT TO DO.

Since last update , I can't see any thing any more

Since last update , I can't see any thing any more, but I can hear sound and music, and I can see my mouse change to the arrow in order to clic. Windows 7, explorer 9, flash player 11.6, I follow your prost it in order to fix it with out go result. What to do? I try to find a previous update for try, but I can't find it.
Thank for reading

fadesone28 wrote:
i did the last update 2 days ago with the whole removing older versions of flash and what not, now my whole internet looks different and i cant sign into latest version of yahoo home page for my mail or anything , any help or can i un-update?
You can always revert your system to how it was 2 days ago by reinstalling from your Time Machine Backup. Otherwise I would be having a read through the Yahoo Troubleshooting forums for people who may have a similar problem.
Pete

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

My caps lock is not working! (Nothing happens when I press it and I cant see any light turing on or off)

Hey guys,
My Caps lock doesnt work, I cant see any green light... I have a NEXXTECH 2.4G Wirrless Mouse and Keybored Combo Set
I have bought it 2 weeks ago and I just noticed that my mac's keybored caas lock doesnt work. I think my keybored settings are bit mixed up so I tried to search on google about "How to reset the keybored's settings" (like a factory rest but only the keybored settings NOT the computer.) Please I dont know what to do, any help and tips will be really appreciated.
( I have a MacBook Pro Mid 2012 with 10.8.2 )

Sounds like a hardware failure of the button. Since you're most likley out of warranty, Google for a phone repair shop near you.

I cant see any thing on my screen

Similar Messages

Maybe you are looking for