I cant start 2 Virtual machines at the same time in a Hyper-V enabled machine
Hi,
I have installed Windows 2008 Enterprise edition. Updated all patched from windows updated. Add the Hyper-V role and installed Windows 2003 in one Virtual Machine and Windows 2008 in another. After the first VM installation itself i had the problem as the below error was coming ibn.
I has to shutdown the Windows 2003 to install Windows 2008.
Now i can only run 1 OS at a time. Shut down 1 to start the other
[Window Title]
Hyper-V Manager
[Main Instruction]
An error occurred while attempting to change the state of virtual machine New Virtual Machine.
[Content]
'New Virtual Machine' failed to start.
Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to power on with Error 'The process cannot access the file because it is being used by another process.'
Failed to open attachment 'E:'. Error: 'The process cannot access the file because it is being used by another process.'
[Expanded Information]
'New Virtual Machine' failed to start. (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
'New Virtual Machine' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to power on with Error 'The process cannot access the file because it is being used by another process.' (0x80070020). (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
'New Virtual Machine': Failed to open attachment 'E:'. Error: 'The process cannot access the file because it is being used by another process.' (0x80070020). (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
Hide details [Close]
Any help is of great use.
REgards
Sharath
I have both the vm's created in different drives. E drive is my DVD drive....
I renamed them,Reinstalled OS, Created a new set of vm's after the first i get the error
It works fine if i stop 1 vm and install the other or stop 1 and start the other...Running both at the same time is the problem
Similar Messages
-
How do i start video and audio at the same time in ios
How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.
-
Why cant i talk and surf at the same time?
Why cant i talk and surf at the same time? Got lost yesterday and while on the phone i couldn't search store web to get the address. Perfect timing to figure this out; when you're lost. This is a MAJOR problem for me and anyone on the go. WHEN WILL THIS BE FIXED??? I will not hesitate to return this phone as im sure all TURBO users feel the same. Someone said the MOTO X was the same way... is it still...why hasn't then been fixed by now? Which now makes me wonder if this wasn't an oversight but something intentional. Why did they hide the fact that they knew this was going on? i should have been told that this capability wasn't available on the TURBO at time of purchase. FIX IT NOW!
ChristiLockridge wrote:
And i've had every DROID since the original with the exception of the Bionic.
Then you have had phones WITHOUT the capability of talk/surf at the same time. If you don't realize this, then you don't(or at least didn't) use it as often as you think. Original Droid didn't have this capability. Droid X didn't have this capability. Droid X2 didn't have this capability. For the most part(there may have been exceptions of which I am unaware), NO Verizon phone had this capability until 4G phones and then ONLY when on a 4G LTE signal. 4G phones on a 3G signal did not/do not have this capability.
ChristiLockridge wrote:
The same as texting, or calling or browsing. This is just a given.
Personally, I check these things on EVERY phone before I purchase. This is just a given. -
How can I start two Vi at the same time?
I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.
One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG 44 KB -
Can I Use Different Programs at the Same Time
Hi All,
I understand that the Creative Cloud can be installed on two computers but the same programe cant be running on both at the same time. I use my MacBook and iMac in unison so my question is could one computer be running Illusstrator and the other running Photoshop without any issues at the same time?
Thanks
SamHi Sam
The Creative Cloud apps can be installed on 2 computers and used at the same time by the individual associated with the membership.
Thanks
Bev -
Internet hiccups daily at the same time
I have been experiencing internet hiccups almost daily. The first time it's always around 10am -11am EST. It will just go out for about 1 minute each time, then come back on and will do that about 3-4 times within 1 hour. Then it works fine for the rest of the day, until the evening when it will do the same thing again, usually around 9-10pm EST. I can almost set my clock by it! I talked to them yesterday and had the signal refreshed etc. I was hoping it was solved, but then it started again last night at the same time as usual! I had received a letter/email not too long ago that they will upgrade their billing system Aug 3rd. I wonder if that could have something to do with it, cause they might be fiddeling around on their system? This has been going on for about 3 weeks now.
Just another update: I still have the internet hiccups. It seemed better when I exchanged the coaxial cable, but that only lasted from about yesterday afternoon until around 12:30pm today and the outages came back. Ugh! Chatted with Comcast around 1:30pm and made sure everything was set up right with the Arris SB6141. Then everything went smooth until 8:30pm and there they were again the little outages! Chatted with Comcast again, got signal refreshed and everything looked good on their end! Was told could be my modem if it's older than 1 year! But I told her that it also does it with my new modem which I purchased in June. bla bla bla explained that I tried everything on my end already. She then was actually at the end of things to check, so I told her I would just come back if it goes out again. I had also told her about the "No Ranging Response received" error on the modem log, but she didn't really seem to know what to do with that. 10 minutes after the chat the outages were back again. So I got back on chat and now have a technician come out on Monday evening! I had googled the No Ranging Response received error and found a thread on here where some people had the same issue and had technicians come out. So I guess that is my best option at this point as I am sure it is not my equipment that is failing. Fingers crossed and I will update again on Monday or Tuesday if the issue has been solved and what the issue was if they can figure it out. Funniest part was that they offered me double internet speed for a discounted price. Mwuahahaha! They can't even get my current internet to work, why would I get faster non-working internet? (I know it's her job to offer it to me) was still funny to me though. I am sure it is just to help me reach my 300GB data cap faster! rofl!
-
Cannot open 2 Virtual Machines at the same time to access the same Database
Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data. -
I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.
I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.
What's your OS?
What exactly happen when you open the click on your Indesign Icon ?
Did you get any error while installing the software? -
How can one share iTunes Library across two machines at the same time?
**I have setup 1 of 2 machines to host all the songs in my iTunes library. I then went to machine 2 of 2 and held down option key on start up of iTUnes, changed the location of the liobrary on machine 2 to a shared folder on machine 1.**
**This works awesome and I can use itunes on each of the machines 1 and 2 with no duplicate library in my home.**
**Problem: I can only run one machine at a time. I can not run itunes on both machines at the same time. The error message from machine 2 is ITUNES library is locked and cant write to the folder. iTunes works correct if I QUIT iTunes on machine 1.**
**Can iTunes run at the same time on 2 machines and access the same library?**
*Thank You Troy*Troy Yoho wrote:
Can iTunes run at the same time on 2 machines and access the same library?
in a way, yes.
set up _*Home Sharing*_ on both machines.
JGG -
How to start two or more tasks at the same time?
Hi all,
I have few tasks setup to send analog and digital output to different channel with buffer and given sampling rate. I need to precisely control the timing of samples output to each channel. But if I start the task in labwindows
DAQmxStartTask(taskHandle1)
DAQmxStartTask(taskHandle2)
DAQmxStartTask(taskHandle3)
they actually not start at the same time since they are exectued in sequence. I wonder how much time delay will be if I start each task in sequence. Also, is it possible to have 2 or more tasks started at the same time?
p.s. I think it will be easier if I could bind different channels to a single virtual channel but I don't think it is possible to create a signle virtual channel with analog channel and digitial channel.RobertoBozzolo wrote:
I had success in doing something similar on the input side by sharing the same sample clock across the tasks with:
DAQmxCfgSampClkTiming (DigitalTaskHandle, "/Dev1/ai/SampleClock", 1000, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 1000);
In my application I had the power to have the same acquisition speed on all tasks, so that the sample clock could be same on all of them.
The conceptual framework is this one (pay attention to the step order):
Setup your AO task
Setup your DO task
Set the DO task to share the AO sample clock with the instruction given above
Start the DO task (IMPORTANT: it must precede the AO task start, so that DO task is started but does not generate samples)
Start the AO task
If you have different sample speed on the tasks, I suppose an alternative is to use a start trigger sharing some digital signal among them. I have seen examples that use a separate counter output as a start trigger.
Thanks a lot. It gives me a good information, I think that will help. I am encountering another sitution, if task1 is analog output with continuous samples with rate 100000 samples/second and task2 and task3 are a single digital sample (i.e. write only 1 sample to one digital line). In task1, I write continuous samples and there will be a spike (of 2.2V) at the time 1.2ms after the task started. And I want to write to the digital channels (task2 and task3) at 0.2ms before the spike was set in task1. In this case, there is only one sample written to DO task, so how does it work to use the sample clock source?
In your last suggestion, we could use tirgger but how does it help? Is there any example I can follow? Thanks. -
Can we start more than one user created database at the same time
Hi.,
Can we start/work more than one user created database at the same time ??
--ShyamHi Shyam,
I really dont understand what you have asked?
If your question is can we start more than one database at the same time then the answer to that is yes but provided to have enough resources on your server to support running of two or more different databases on the same machine.
Ex Senior DBA -
When i try to update an app it says unable to download at this time. No matter how many time i do it. But then i tried to delete an app then redownload it to see if it will let me but i cant download it either it has the same error! HELP!!!
Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream. -
my iphone 4 stopped working suddenly....it wouldnt charge or anything...i was told to push the on button and the home button at the same time and it came back on.
is this a fault with the iphone????
i cant have my phone switching off randomly...any help please...thankyou.sometimes it happens, a hard reset will sometimes solve the issue.
If the issue starts happening more often, I would consider restoring the device to factory settings to install clean software. If the issue still persists after that, the device might need a hardware repair.
More info on backing up and restoring the software: http://support.apple.com/kb/HT4137
Good luck
Stijn -
I've just purchased a new Mac mini server and also a new time capsule is there any easy way to ghost or transfer the new machines at the same time or is it best to do one at a time?
I have no direct experience transferring a TC and computer at the same time, but prudence tells me to do one, test to be sure it is correct only then do the other. It will take twice as long from process start to finish, but avoids any nasty surprises at process end. In close to 40 years experience, I have never seen a "crash conversion" (everything at the same time) that did not have at least one major disaster. I am sure it can happen but the odds are heavily against it. Patience is a virtue!
-
If you use iTunes to burn Audible CDs you better hope the book is only one CD long. Otherwise iTunes craps-out without warning and cannot be easily restarted. It just goes to EOJ and pretends it's all done with the entire burn. Often this can cause (will cause) the user to waste many many CDs trying to get a burn completed. If a CD-end is reached at a chapter-end point, iTunes assumes the burn is done and ends. The user must manually enter start:stop for each CD, pay constant attention to what's going on, and hope everything goes right. And even if you do all that you WILL find a chaper point at CD end and will have to go manually adjust the start-stop of the next CD and HOPE... that's their strategy: Hope. iTunes was never designed for books, for audio content that is multi-volume, and it really ***** at it. And if you are unlucky enough to want to burn long books (Truman -48 CDs, or Atlas Shrugged - even more), be prepared to throw away many tens of CDs as you try to get it done; pretty soon it's just cheaper to go buy the book in audio form and dump Audible entirely. (Maybe this is why Amazon made the switch from working Roxio to non-working iTunes... nahhh.. you'd have to be too cynical to believe that...) If, that is, you don't just give up in frustration and terminate your Audible subscirption as I did a couple of years ago. Audible keeps your paid-for library, but downloading a long book again just brings you to the same point: trying to burn multi-volume CDs on a tool not designed to do so. Maybe amazon bought lots of Apple stock at the same time and just wants you to be walled-in to your iPod and never again use a CD.. maybe they bought the car companies, too, so you can't have an old car and must buy a new one with an ipod attachment in order to listen to your books..... The worst part is that Audible used to use Roxio, which handled all of this with no problem at all. When it was tasked with a multiple-CD burn, it told you how many you'd need, began recording, when it reach end-of-CD, it told you to put in the next one - regardless of whether there was a coincident end of chapter, and kept burning until the book was completed. For unknown - and seriously stupid - reasons, audible decided to use iTunes, and the problem continues. My research across the web indicates I am not the only FORMER customer of Audible that feels this way, or who cancelled their subscription because of this stupefyingly dumb decision - to make the primary customer interface tool WORSE that it had been.
AC, Thank you for you reply.
Even though it is supposed to be a 'simple' home video system it has so much potential!
And i mean i know there is an solution since i know the Caribbean cruises are using apple as media centers onboard their ships. have to admit that i do not know if they are using frontrow or some other application created buy some other company.. i just know that some one must know how to get around it all and make it work..
Just wish i had someone to get in contact with that is working hands on every day with this product, and get strait, good, final answers.. no "pro support" since im not happy with their answers anymore..
I know i start to sound desperate.. but thats because i am..
Maybe you are looking for
-
Is there a way to turn off showing the time in each Calendar entry in "week" view?
I use the "week" view as my primary calendar. Upon updating to Mavericks, the calendar forces the starting time to be shown with each entry. This forces me to make my entries at least 1.5 hours long to show even two short lines of text. I frequently
-
How do i get the app and the podcast option to show up on the side where it says music film ect..?
In need to delete some podcasts and apps off my computer but its not giving me the option to click them I did something before to make them show up but ive forgotten I need help
-
OWB 10 Release2 External Tables
Hi Tried with external tables, if i try to execute a select statement it retrieves 0 rows from external table. But if I do a select count(*) it showing 64939 as count. Created the mapping and tried to validate..it validated with warnings abt the data
-
Updating Logon Data for Web Service in SICF not possible
Hello, hopefully someone can help me with my problem. I have created a custom Web Service based on a custom Z Function Module. This all works fine in our Development environemnt. I was able to go into SOAMANAGER and generate the end point. This creat
-
Linking to other stories within the folio
Could use a little instruction on how to create a hyperlink and/or a button that can send people to other stories within the folio.