I chat 4 video quality is terrible!

Can someone please help!I just switched over from a pc to macbook mac ox 10.5.1 expecting great video quality with i chat or skype but instead had to deal with error 8 messages in i chat after all the headaches of opening ports in my router, the audio video is working but the video quality is very bad my own preview is clear and my boyfriend sees me clear,but the image I get of him is very pixellated. I've set the bandwidth to none and speed to 1.5 in quicktime, my average speedtest results are 6500 downloads and 400 uploads. connection doctor average is usually about 350-400 framerate 9 -10 for both local and his connection. We both using have tried connecting directly to the modem, however I still get poor image. He is also using a mac ox 10.5.1 i chat 4 same machine except for different graphic card I have a gma x3100 144 mb while he has the gma 940 4mb can this have something to do with it ?

Who is your ISP ?
If Comcast, Road Runner or Verizon FiOS then set the Bandwidth to 500
9:05 PM Sunday; November 18, 2007

Similar Messages

  • Chat video quality...

    Has anyone been able to video chat with two or three people and maintain a decent video quality? When I try to video chat with two people the quality drops considerably, and I'm wondering if it's a bandwidth problem, or if it's just the way it is. I'm hoping it's the former.
    I posted elsewhere regarding this issue, but didn't get a decisive answer. You can see that thread here: http://discussions.apple.com/message.jspa?messageID=2581668#2581668

    Hi Saul23,
    It does depend on all parties having a "good" connection.
    Realistically this is going to be at least or close to an upload of 1Mbps.
    Once one party drops below an upload of 500kbps you can be certain of noticing a drop in quality.
    It is best that the fastest Buddy (upload speed) is host.
    12:26 AM Friday; June 23, 2006

  • Edited video quality looks terrible!

    I am seriously confused... Take a loot at the photo. On the left is the viewer and on the right is the canvas.
    I have filmed with an HD video (5D MKIII) yet why is it, when I edit this specific part of the video it goes so poor quality?
    I have changed all the playback settings to full quality and HD. I even tried to export it and it came out poor quality as well!
    Befire rendering it looked fine, yet when it has been rendered it looks terrible. When I view it for editing it also looks fine (as you can see) but in the canvas it looks terrible again.
    Why is it doing this and is there a way to fix it?
    Thanks

    That could be the problem... where it says 'Quicktime Video settings' that was set on H.264. I haven't converted my .mov files to ProRes no...
    I'm guessing I'd need to convert them then import them and edit them all again then?
    Thanks for the reply

  • Chat Video quality starts out fine, then fades ...

    My video starts out good, then after a minutes or so, the picture gets pixelated and the audio garbled. The person on the other end has no such issues and can see/hear me just fine.
    In iChat, my bw is set to 'none'. In system preferences, my Quicktime streaming speed is 1.5 Mpbs.
    Thanks,
    - Greg

    Hi GDykes,
    OK Imagine that Connection speed from your ISP is like an empty freeway. You can go full tilt (upto that road's speed limit)
    Bandwidth is like a busy freeway where you only get to go as the bit you are in allows.
    Reducing the Bandwidth in iChat or in the System Preferences > Quicktime > Streaming tab is like a vehicle that has a maximum speed that is slower than the speed possible on the freeway.
    10:02 PM Friday; July 6, 2007

  • Freezing at Sign On and Diminished Video Quality

    I'm having trouble with iChat. First, I seem to be getting a lot of freezing at sign-on. I can occasionally see the face of the person I'm connecting with - but then I get an error drop down window from Apple asking if I want to send a report. When I am able to connect, the video quality is terribly distorted.
    I have iChat version 5.0. I have set my bandwidth at 200 kbps. I'm running Snow Leopard and use AirPort.
    I seemed to have had a decent connect last week, but it has gotten steadily worse in the past few days. Does anyone have any fixes they can recommend? Thanks!

    Hi,
    Manually go to your Home Folder/Library/Preferences as Spotlight does not report on this folder.
    Also delete com.apple.iChat.AIM.plist if it is an AIM/Apple Login
    Or the one with Jabber in it if a Jabber Buddy list is the problem.
    Do not delete this with the one mention by Carolyn as that will cause the Start Up Screens to Appear again.
    8:36 PM Tuesday; September 8, 2009

  • IPhone 5 YouTube App Video Quality on LTE

    Hello,
         I am new to this community and hopefully my post will receive some good information, feedback, suggestions and so forth. Well I have an iPhone 5 and when I use LTE and try to watch a youtube video on the app I have terrible video quality. I have speeds varying from 9 mbps or higher at times. Yet, when I use my WiFi at home for verizon I receive great video play back despite slower speeds (3-6 mbps). I would appreciate any information you guys may relay to me and/or experiences you have with the app through our wonderful carrier
    Thank you for your time!

    I'm having the same problem with my iPhone 5
    And I have sprint LTE
    I don't know why when I'm at home video quality is good on my wifi but when I'm on the go video quality is terrible on this YouTube app
    My iPhone 4 had better quality with the old YouTube app
    Please fix this apple!

  • My Videos Export in Terrible Quality

    I have a video project I'm working on, I've finished it and went to export as .wmv and .mov . When it finished exporting, I watched the videos, the quality was terrible. Any part of the video that had a lot of motion would look "liney". I've posted the videos so you can see what I mean. I realize that there are sections of the video that are un-rendered, I've taken care of that.
    http://cornerstonemin.org/myvideo/Hava Java.wmv
    http://cornerstonemin.org/myvideo/Hava Java.mov
    How can I fix the problem, it's not when I import it because I use iMovie 6 to import than transfer the clips to FCE4 to work on them and edit. I've tried importing through FCE4 but it doesn't make a difference in video quality.

    your links seem broken… but, you said they seemed liney… maybe you forgot do de-interlace.
    de-interlacing makes your video so that it's proper for viewing on a computer screen.
    there are two ways to de-interlace you footage in Final Cut Express:
    1: doubble click on one of the clips to bring it into the viewer, then go to Effects —» Video Filters —» Video —» De-interlace. You can then copy and paste that filter to all the other clips in your video.
    2: export using quicktime convertion, select quicktime movie, and then click options, click on size, and click "de-interlace source video"

  • Video quality while chatting

    While video chatting one-on-one the quality is great, but when video chatting with two or three people the video quality drops like crazy. No matter how small I make the window the images of the people with whom I'm chatting is super pixilated, and I'm wondering if there's anything I can do to improve the quality. The quality of the connection doesn't seem to be a factor either.
    It's frustrating because all of the pictures of the three person video chatting look so clear... Seems like false advertising.

    For info and others,
    iChat depends more on Connection speed and the Bandwith it uses of that for good connections.
    iChat reads the connection speed you have from the System Preferences > Quicktime > Streaming tab > Streaming setting.
    If this is set to the default of Automatic it returns a 0 (Zero) to iChat and caps the bandwidth.
    http://docs.info.apple.com/article.html?artnum=301641
    If your connection speed exceeds 1.5meg use this setting as the max.
    In iChat > Preferences > Video section > Bandwidth Limit drop down should be set to NONE otherwise it also caps the bandwidth.
    The min Apple say is needed to multichat is 384kbps both Upload and download speeds.
    Realistically there is a drop off in the H264 codec driven video quality when you add 2nd and 3rd or even a 4th person.
    Ideally you need at least a 1Mb upload to maintain an excelent picture quality. This is for all people involved in the chat. The best solution is to get the fastest Internet connection Buddy to host the chat.
    12:12 AM Friday; June 23, 2006

  • Terrible iChat video quality. What gives?

    My brother and I are trying to use iChat video. We both have an iMac, his is newer than mine, but we both have the same OS. On both ends the video quality is very poor and the audio is bad (hearing every other word). We both have high speed internet, I have cable he has DSL. We tried limiting the bandwidth to no avail. Any suggestions?
    Thanks!

    Also both of you should open the Connection Doctor (iChat Video menu) during a chat and tell us what Speeds (Frame and Bit Rate) you see.
    You should get at least 15fps and have a speed in Bit rate of well over 100kbps (up to somewhere over 500kbps depending on your Internet speeds at both ends).
    200-300 is common. 500+ is not unusual.
    8:24 PM Tuesday; April 28, 2009

  • Terrible Video Quality? HELP

    Does anyone know why when I play videos over the Iphone the quality ***** and it is very laggy/blurry with pink and green lines at the beginning? Sometimes it will play them correctly, but most of the time it will not! The quality is great on Itunes and plays just fine. On the Iphone however the quality is terrible for short and long videos. I just downloaded a music video today and the quality is terrible on the Iphone, in Itunes it is excellent. Anyone have any suggestions? Yes I have the new update and I just restored my phone no fix...
    Thank, You

    I'm having the same problem just started tonight. Utube and all QuickTime video on the apple site as well.
    Message was edited by: sheila&bob

  • I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • Poor video quality, pixelation, flickering on moving subjects in frame

    I made a quicktime movie using File>Export>Quicktime Conversion... in FCP using H.264 compression codec with best video quality and 16-bit audio. video was originally captured in miniDV. Self contianed movie was made and looked pretty good in Quicktime, though the edges of moving subjects in frame did have small wavy lines (I assume from interpolation of DV?). Anyway it was acceptable to me (but if there is a fix please advise as I figured this was endemic to miniDV itself.)
    Then I created a DVD in iDVD 6.0.3 with several slide shows and two relatively short movies (12-14 minutes in length each). The edges of moving subjects in frame (i.e. persons walking into the frame) now have large square pixelations sort of like this --->( |-|_|-|). At anyrate, the fine wavy lines from the QT movie have become much worse when there is movement, and I'm not talking speed, just any movement like a hand moving in the frame, etc. Otherwise the quality of the video is comparible to the exported movie from FCP.
    Does anyone have suggestions for how to eliminate this problem?
    thanks!
    imac intel core duo 2.16GHz, Superdrive 8x   Mac OS X (10.4.9)   3 GB ram

    the edges of moving subjects in frame did have small wavy lines
    That's normal interlacing. You usually want to preserve those comb lines if your target is TV display which will hide them and use them to make smoother motion.
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#interlacing
    But if your target is a computer display, then you usually want to deinterlace them off because they look ugly on a PC monitor.
    originally captured in miniDV ... H.264 ... Then I created a DVD in iDVD 6.0.3
    No! You should not convert the original DV to H.264 if your final target is a video-DVD!
    Just keep it as DV. And take care that your FCP export to DV is bottom field first field dominance because otherwise you get terrible zigzag movement artifacts! ...I don't have FCP so I can't give you more advice on that (mini-DV ->iMovie ->iDVD handle all this automatically).

  • Multi-Person iChat Video Quality

    Hi,
    I am using iChat with 2 other person (so a total of 3 people in the video conferencing). What we noticed is that the audio quality remains great. But as soon as the third person joins the video chat, the video quality decrease dramatically.
    Any one experience this problem?
    Thanks.

    Thanks for the reply.
    Have you set the Quicktime setting, goto sys
    prefs/quicktime/streaming/streaming speed set what
    you get from your ISP go no higher then 1.5mbps(dont
    use automatic)
    I didn't know that Quicktime has anything to do with iChat. I will check that tonight.
    In ichats prefs click on video and change bandwidth
    limit to NONE.
    Alread set to NONE so this shouldn't be a problem.
    Also all of you do a speed test
    http://www.speedtest.net/ and tell us the up and
    download speeds are.
    I have done many similar tests and it is consistently rated as "excellent". I will need to do the test to find out the exact rate tonight when I am home.
    So, out of the 3 things, sound like the Quicktime setting is the only one that I have not done.
    Thanks.

  • IChat video quality better with .Mac subscriber than with AIM?

    The quality of my video chats with one brother who also has a .Mac account is noticeably better than my chats with another brother, who uses iChat with an AIM account. I'm in the US, they are both in UK. All of us have almost identical iMacs. The one with the AIM account supposedly has a faster Internet connection. My question: is the video quality of iChat better if both users have .Mac accounts than if one has an AIM account?

    The Screen names make no difference.
    It is about a combination of Proccessor, Video card in iChat 4, internet Connection and settings and the amount of Bandwidth you get out of that connection.
    As Defcom (UK) has said start with those basic Settings.
    In iChat 3 and 2 the Quicktime setting when on Automatic is read as a 0 (zero) and this effectively Caps iChat.
    In iChat 4 the Automatic setting is seen as 384k which is the MINIMUM for a 4 way chat.
    As far as an Internet Connection goes this should be at Least 100k in both Up and Downloads.
    Due to some data stream management to cut down on Peer-to-Peer file Sharing it pays to limit iChat in the Video Section Bandwidth Limit section to slip under the Radar as it were. There are two main ISP doing this Comcast and Road Runner in the States.
    Verizon offer a FioS fibre service that is not that stable in speeds and jumps all over the place which is then too fast for iChat to keep up and that should use the cap in iChat Preferences as well.
    8:08 PM Friday; June 20, 2008

  • Video quality of some iTunes videos is BAD

    I've seen several articles around the net about older videos having been up-converted to be the new 640 x 480 size but when I downloaded episode one of Battlestar Galactica, Season 3 I was really disappointed to find that it was obviously up-converted as the quality was terrible! episode 2 looks great. What gives iTunes??
    Dual 2ghz G5   Mac OS X (10.4)  

    Banana007,
    While I feel for you, it appears you didn't read the header of this Feedback about discussions. I'll ask a moderator to move your post to the appropriate forum. Someone there may be able to help you fix the audio quality of your Touch. In the future read about the differences between forums and categories so you know where to post a new topic:
    http://discussions.apple.com/thread.jspa?threadID=1574700
    Message was edited by: a brody

Maybe you are looking for

  • BAPI_ACTIVITYCRM_CREATEMULTI in CRM

    Hi Experts, I have one query regarding the bapi - BAPI_ACTIVITYCRM_CREATEMULTI. i want to add some more fields in TABLES of this BAPI. In TABLES of this BAPI there is a table named as : EXTENSIONIN. I have tried to add some data in this field which s

  • How can I set the default in "Write" to display several email address instead of just one?

    Like to see more than one person on the Write screen at a time. The default seems to move the first one up. I would rather like to have at least four be able to be seen without any scrolling of addresses. Am familiar with config editor if necessary.

  • ARE 1 output

    Dear Friends, I am working on  ARE form in SD .. but iam unabul  to see output of standard form  . My consultant was telling that its ABAP problem so u  are un abut to take output of standard forms . so friends plz help me whar is problem & plz guide

  • Issue with Condition dependent PO output

    Hi, We're implementing Extended classic version for SRM 5.0. As part of the output determination, we need to determine 2 print outputs for Purchase orders. We have 2 purchase organizations and both of them need to have 2 different smartforms for the

  • Trouble getting numbers that I purchased from the Store for my MAC to get on my IPAD.

    I bought and downloaded Numbers for the iMac a couple years ago. I just bought an iPad and was told I could download numbers at no charge. I had the same problem with Pages, finally gave up and purchased it again as I needed it to get iCloud working.