I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

Thanks for replying (thorvsphoenix)
The windex was sprayed on the cloth, not the keyboard. And only one or two pumps on a hand towel. No liquid seeped between the keys the towel was barely damp. You are saying the ammonia gas created the problem?
I think It was more an issue of multiple keys being depressed at the same time that screwed up the configuration. That is why I need to "reboot" the keyboard.

Similar Messages

Is there a way to reset my iphone i did the latest update on it and now it will not let me download any apps. I tried the general reset but it keeps denieing me saying that my passcode is not correct. This is the same passcode that i use to unlock

Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.

press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try

Apple remote not working, is there a way to setup Apple TV without the remote

Apple remote not working, is there a way to setup Apple TV without the remote

Welcome to the Apple Community Sylvia.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

Recharging is a good thing to try. They do start to act odd when the battery gets low. Beyond that, just like Tom says, contact Zagg. I have one of their keyboards and the company has wonderful customer service.

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

My sleep/wake button is sinking in so its not working is there any way to turn my ipod off

my sleep/wake button is sinking in so its not working is there any way to turn my ipod off

nope. If your under warranty apple will cover it. If not find a repair shop. You can try looking for an app but if it turns off then you cant turn it back on!

My ipod is frozen...nothing is working, is there a way to reset the unit?

My ipod is frozen...nothing is working, is there a way to reset the unit?

hold the menu button and the centre button togeher for about 10 seconds

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Some of the services of ITS 640 are not working

Hi All,
I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
I am using internal ITS for HTML GUI.
Some of the iviews of the business packages are working but some of them are not.
I am getting an error message
"The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
I have published all the services that are under SICF.
I had also published all the services using w3_publish_services and siac_publish_all_int.
It says that all the services are succesfully published.
When I go to SICf to test the service,some of them are not working.
Can you guys tell me what are the steps that I am missing?
Thanks,
Paritosh

I am also getting the same th_res_free error..
I have installed nw04 sr1 and trying to run ESS on it.
My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
Now how do i publish the services on WAS 6.4??
Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
Please tell me what can be done in this case.
I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
Please help me out .. i dont want to install a ITS on another machine which is simple solution..

Some keys on my MacBook are not working

Some keys on my MacBook are not working. For example, the "b" is not working. But when I turn on capslock it will type "B". Any ideas???

Try resetting your SMC and tell me if that works http://support.apple.com/kb/HT3964

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now,it it does NOT work at all.

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now, it it does NOT work at all. ???
I have reinstalled my google bar AND firefox 4, with no improvement. ??????????

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

The buttons of my ipod are not working, that means that i cant enter because the scream is black, what can i do???? thanks, the buttons of my ipod are not working, that means that i cant enter because the scream is black, what can i do???? thanks

the buttons of my ipod are not working, that means i cant use the ipod because the scream is black and i need press one of that buttons for use it, what can i do? thanks

You will need to get it serviced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

Number keys 1 thru 3 are not working

number keys 1 thru 3 are not working, so I am unable to unlock my iphone.

I went ahead and lock myself out from the password screen. Waited the allotted time. Now all numbers work. Thanks for your input

I cleaned my wireless keyboard with a cloth that had a few sprays of windex on it, wiping back and forth and up and down on the keys. Now, various keys are not working. Is there a way to "reset" the keyboard to restore the keys?

Similar Messages

Maybe you are looking for