I cleared the cache and my site does not update!  What's the secret?

I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginnings

hello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

Similar Messages

  • I use firefox 5.0 to carry our vehicle data checks on Experian and for some reason I can no longer do this - I have cleared the Cache and still it does not respond - can you help please Thanks Ian

    I enter a registration number and click search and nothing happens - I have spoken to Experian and it is working all ok at their end. I have the same problem with my imac and Macbook Pro

    I enter a registration number and click search and nothing happens - I have spoken to Experian and it is working all ok at their end. I have the same problem with my imac and Macbook Pro

  • I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music

    Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!

    What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.

  • I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC.  I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display.   Any suggestions?

    To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network.  If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen.  Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB. 
    Any suggestions for making the Import button appear?

    I hvae the EXACT same issue
    I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
    I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
    what do i do
    windows 7 64 bit

  • I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
    Från: Mylenium 
    Skickat: den 29 december 2014 16:48
    Till: Tony Bohman
    Ämne:  I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    created by Mylenium <https://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

  • Setting general   there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

    setting>general  there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

    Siri is not available for the iPad2, just the New Ipad (3).

  • I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

    I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

    why does he think that?

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • Complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

    complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

    I had this same problem and started a thread, but for the most part nobody responded and those who did somehow didn't understand what the problem was.
    http://discussions.apple.com/message.jspa?messageID=11504935#11504935
    I'm sure the problem is sweat getting into the apple supplied headphone "remote." Basically even the smallest drop can slide down the wire and get into the unit.
    Unfortunately I haven't found a solution other than to get a Belkin remote adapter and some sport headphones. This doesn't give you voice over, but you can still control the volume, skip, etc.
    I've been doing this for a couple weeks now and it hasn't had a freak out since.

  • How can you start up your ipod if holding the hold and home button does not work?

    how can you start up your ipod if holding the hold and home button does not work?

    Remi,
    How long did you hold these buttons for? Did you try more than once?  Have you tried letting it charge for a bit and trying again?
    If nothing else, see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS2771
    B-rock

  • The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

    Hi,
    I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
    When i try to enroll a permanent smart card for a user, its shows me the following error:-
    The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
    Also there is no logging done for the particular event.
    I am able to change my smart card pin and view my smart card info. through the FIM CM client. 
    Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
    Thanks

    Hi,
    Sorry for the delay in reply.
    Please try the following steps first:
    Open Powershell as Administrator
    Go to Start--> Run and type wbemtest.exe.
    •Click Connect. 
    •In the namespace text box type "root" (without quotes).
    •Click Connect.
    •Click Enum Instances…
    •In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
    •In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
    •In the Object Editor window, double-click HandlesPerHost.
    •In the Value dialog, type in 8192
    •Click Save Property.
    •Click Save Object.
    Under properties find the property "MemoryPerHost" or any other ones you need to modify  and double click it
    Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
    Click Save Property
    Click Save Object.
    •Close Wbemtest.
    •Restart the computer.
    And if all nodes are Windows server 2012, install the following update rollup as well:
    Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
    http://support.microsoft.com/KB/2862768
    If you have any feedback on our support, please send to [email protected]

  • My flash and back camera is not working it just out of the blue stopped working I reset everything and it still does not work what should I do it's an iPhone 5c

    MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c

    Backup and then restore as new and see if it works or not.

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • I need to change my account name but even if I updated it in the Adobe website, Revel still does not update my name at all! ***Urgent***

    I need to change my account name but even if I updated it in the Adobe website, Revel still does not update my name at all! ***Urgent***

    Good morning,
    Glad your account is up and running!
    As a note, the Revel service is not going away any time in the near future. The apps that are no longer available as of Dec. 8 are Grouppix and VideoBite
    Glenyse

Maybe you are looking for