I CLICKED UPDATE ON MY 4S AND NOW MY SCREEN SAYS CONNECT TO ITUNES.
IT SHOWS A CHARGER AND AN ITUNES SYMBOL. WHAT DO I NEED TO DO> iT WONT LET ME ACCESS MY PHONE
You can always try to reset the device with the sleep/wake and the home button held for +- 7-8 seconds until it reboots. If this does not solve the issue, the article that stevejobsfan0123 will become the only way to solve it.
Similar Messages
-
I updated my Apple TV and now it will not connect to iTunes but it will connect and play Netflix. I have restarted Apple TV and checked wifi connection.
1. First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
2. If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings).You should also try restarting your router.
3. If both of the above don't help, you should try a restore (Settings > General > Reset > Restore). -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
i updated my i pad with ease then updated my i phone and now apple does not recognise the i phone and then says there is no sim in the phone when there is one installed, can anyone help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
I got a messgae on my screen about the 5.1 update on my iPhone 4 so I clicked update. My device turned off then the apple screen popped up and it began to perform the up date. after the loading bar was full it went to a connect to itunes screen so I did but nothing happened and iTunes will not recognize my device. I have uninstalled iTunes and reinstalled it. I also held the home/sleep button while holding menu button. Can someone please help me???????/////
Similar problem here. I have the 4s model and I try to do the update but when it downloaded the update it said that a problem occurred and then switched to the connect-to-iTunes screen.
Any ideas? -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
I just updated my iPod to iOS 6 and now it won't connect to iTunes, and iTunes says to restore it, but if I restore it I will lose all of my data. What do I do?
Uhless this program will get the iPod out of recovery mode you will have to restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
i've factory rested my phone and now its showing to connect to itunes after connecting it is downloading software
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Hello, I just downloaded ios 8 for my 4s iphone and now it will not connect to itunes on my mac. Any help will be greatly appreciated.
Hello wedge60,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device recognition issues:
iOS: Device not recognized in iTunes for OS X
Follow these steps to resolve your issue:
If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
Restart your iOS device.
Restart your Mac.
Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
If an iTunes update is available, apply the update.
Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Try another USB cable.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Never before have i ever updated my iphone off the computer, there has been issue with backs up. So i went to back up my iphone 4s, it needed to be updated. so i updated it, during the update something had occur and my iphone 4s screen says connect to itunes be it wont connect???? i tried so many things. Ps this is my mom and she needs it
we have itunes off a PCHello there, Nunesie.
It sounds like your iPhone is not being recognized in iTunes by your computer. The following Knowledge Base article provides some great, in-depth steps for troubleshooting that issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If after following the above steps, the issue persists, then the following article helps with completing the update/restore:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I dropped my ipod touch 3 generation into some water. I let it dry off completely befor turning it back on. Now it shows me the itunes logo and the usb cord picture. I restored my ipod, and now it won't connect to itunes or my computer. What should I do?
Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason -
my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do
Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149. -
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Major global classes used in abap objects
Hi, I am new to the abap objects and till now i am to understand that the role of the global classes are important in the abap object program. I had tried to search on the net but i was not able to get the desired result. I want to know which are the
-
I installed the 2014 version of CC and since then the play button (space bar) no longer works. Everything else seems to be working fine but I can't play my timeline. I can scrub through the footage but it won't play. Does anyone else have this issue
-
Incremental uploads from camera, possible?
This weekend we took a trip and for the first time used our iPod for the one big reason I finally purchased it for, photo storage. My one gripe was that we often took pictures and uploaded to the iPod to better view the images. Then after inspection,
-
Exchange 2013 + 2007 OWA coexistance not redirecting properly (HTTP 400)
Hello. I am using this document to funnel our new Exchange 2013 external traffic through an IIS ARR reverse proxy, much like we already do for MIcrosoft Lync 2013 on this machine. http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-rever
-
Query about Proforma Invoice (F5) and Excise proforma Invoice (JEX)
Dear all, I would like to know for excisable goods, customer should be sent two separate invoice? i.e. Pro forma invoice (F5) and Excise Invoice India (JEX). or only excise invoice India (JEX) should be sent. Please help me for the same. Thanks in ad