I created a new account/profile on my Mac OS X (10.4.11) and tried to download Firefox, which I am already using on my existing account/profile, and was told that my system doesn't support Firefox; what's this all about?
I would like to be able to use Firefox on the new account/profile I have created and don't know why my system will support it on this account/profile but not the new one.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
Similar Messages
-
I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?
What is a 7.1 intel?
-
I'm not sure why I'm getting this message at all. I've attached an image of the pop-up. Can anybody give me some help?
Thanks!Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you! -
I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????
Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself. -
Confirming, indexing, creating peak file. What's this all about?
Althought I'm new to PrPro (see my very first post, it was the that I just started using this app), premiere already ate me that anywhere I go, when it comes to video editing, I am in its belly. But still I want an explanation regarding (again) about this message that's appearing in the status bar: 'conforming ?????.mpg". I don't really understand what's this all about. A little explanation is a lot to me. But what I am concerning about this thing is, it seems to be endless. PrPro had done already on all of my assets, conforming, creating peak files, indexing, but it still keeps on doing it again and again. Is there a problem with my audio/video files?
During the first time of my use, I didn't mind. I didn't even notice it. But now I started to be concerned with it since I my pc really slows down when PrPro starts this seemingly perpetual activity. If there's a problem somewhere else please help me.Did you notice that you make the same mistake as one of our regulars here, the_wine_snob, otherwise known as Bill Hunt, in leaving out one 'a' in my last name? I'm not offended but wonder if that is a human trait to not overdo it and two 'a'-s may be too much?
I resemble that comment! Harm, you have to realize that I am from Mississippi, and everyone is known as Billy Bob, Joe Bob, or Bubba. We had no Harm Millaards - too many double vowels and consonants for us. At least this helped, when I signed up for a bunch of X-rated sites, as Harm Millard...
OK, where were we? LameTiger (check that spelling, as I think I got it wrong again and apologize profusely), when one has non-standard footage, three thing need to happen: the files need to be indexed, the Audio must be Conformed (CFA files) and the Waveform Display (PEK) files must be created. Depending on the number of files, their Duration and one's computer's speed this can take from moments, to maybe 20 mins.
If you have not just loaded up this Project, then gone for a cup of coffee, or tea, I urge you to do so. There is a tiny progress bar in the very lower-right of the GUI, that traces this. Let it happen, and be patient. I know that this sounds like a scene from the Karate Kid, but it's important. Many systems will crash, if one tried to do anything, before this process completes. I can work (albeit slowly), during the process. Many cannot.
Now, if you HAVE patiently waited this process out, and it has completed, AND the next session yields the exact same thing, then something is not quite right. Could be files getting moved, deleted, or otherwise not available to PrPro, or some setting in one's Scratch Disks, or some other problem.
Hope that a bit of patience, and a cup of Darjelling helps. Please let us know.
Good luck,
Hunt -
I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?
Which model iMac do you have? http://support.apple.com/kb/HT1758 How to identify iMac models
Which OS is currently installed?
Check out KB Articles: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
If not of the above works and you have AC, call them. Let them deal w/it. Otherwise, take your iMac down to your local AS or an AASP. Diagnostic testing is FREE!
You can also research for a solution on YouTube's "How To" website and iFixit. -
New song download is not compatible? What is this all about?
I just tried to download a song onto my nano and when I went to move it over, a prompt came up saying the song was not compatible with my device. What is this all about?
Wickets924i believe it's because on the "system requirements" it says that if running on vista, it needs to be on a 64-bit system. Mine runs on 32 and doesn't seem to work. it crashed my computer... big time.
I am not computer savvy though... could be wrong. -
When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon. -
I just updated to Mountain Lion and now I notice on the side bar under "shared" an icon of a computer. It states that it is a memory card. What is this? I can't seem to open it. FYI: my wifi router is password protected. Thank you!
Do you have a printer that has a memory card slot on it?
-
My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.
Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional. -
Hewlett Packard (HP) Printer Software Update ver. 2.16.1 has auto-installed/downloaded twice within the past few days and now, today, the App Store wants to download 2.16.1 HP Printer Software Update for a 3rd time!?! Same version all 3 times. What’s this all about? Is something acting up or is this normal? Really strange that it'd want 3 copies of 2.16.1....
Please advise what I should do.
I’m using latest Mavericks OSX (10.9.2) on Macbook Pro (mid-2012).
Thank you,
A
Below is a screenshot in case I made no sense explaining the problem above.I don't know the cause and I haven't heard of that before, but
I think you should try some generic maintenence:
Startup from the Recovery Partition, and repair the hard drive and repair permissions with disk utility.
http://support.apple.com/kb/ht4718
(just read the first paragraph) -
When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?
If everything is working OK, I believe it simply means that the iPad and iTunes are communicating and that any changes that you made to the sync configuration are waiting to go through. If you updated apps on the iPad and they get transferred into iTunes or if you download new songs onto the iPad and they are being transferred into iTunes, any app data that moves back and forth - those would be changes that need to be applied.
If you can't finish the sync and that's why you are asking, can you provide more specific details? -
Safari is asking us to call 1-866 782-**** because of a security issue. Safari is not currently working. What is this all about?
<Post Edited By Host>Sorry for the second same words reply but I want people to see this is a scam thank you
this conversation has help me, today I had the same pop up scam announcement, I was searching in you tube yahoo and google about this no one apparently had this issue before, first I was going to call the original apple phone number because to me this pop seem awkward but the announcement had the apple name I gave it a try but using the call app phone booth just to see if it was the official apple phone number and if it was not who ever was asking me to call wont get my actual phone number, to my surprise it wasn't apple official phone number because I have called the apple official # and is nothing a like, I hung up all worried and sad with only one option in my mind called the apple support number, then I stop and thought for a minute and one clever thought came to my head that is brain lol, the clever thought was this "let me put this phone number in the web to see if it takes me to the official apple website" so I did it and the first pop up search was this article this conversation of you guys read it and follow the instructions they were very successful fix my issue, thank you so much guys, keep up the great work.
Edit -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
my itunes is playing up. Every time I play a track or album I get a crackling interference noise. It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?
See if this article will help:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Maybe you are looking for
-
Safari and camera have dissappeared, how do I retrieve?
safari and camera have dissappeared, how do I retrieve?
-
I've posted this before, but have had little luck, so here goes: The computer in question belongs to my Dad: iMac DV SE 400 mHz 640 megs RAM OS X 10.4.3 The airport card installed in it works only on some occassions, and there seems to be no rhyme or
-
User Decision in a Module Pool
Hello Guys, I am relatively new to SAP workflows. I am implementing a solution here and I have mixed feelings about the design. I would love to hear some advice on how to proceed or some reassurance that I am going in the right path. Requirement: If
-
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
-
Hello, I'm going to clone my xi. As I'm reading the homogeneous and heterogenous system copy for java and abap. I'm to the following conclusion. I need to do a oracle server specific copy. And do a sid rename on db level and in abap side with se06. b