I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com

Similar Messages

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

    This is the code which we have used.
    //////////Return if it is first time for the day or not//////////////
    + (BOOL)isFirstTimeToday {
    BOOL result = YES;
    NSDate *now = [[NSDate alloc] init];     /// represents the current time
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
    NSDate *today = [gregorian dateFromComponents:components];
    [now release];
    [gregorian release];
    NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
    if (savedDate) {
    if ([today earlierDate:savedDate] == today) {
    result = NO;
    return result;
    ////////Stores the date/////////////
    + (void)userDidVisitReenforceScreenToday {
    [[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
    ////////////What [NSDate todayAtMidnight] stores/////////////////////
    + (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
    NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
    NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
    [gregorian release];
    NSLog(@"dateAtMidnight : %@",dateAtMidnight);
    return dateAtMidnight;
    + (NSDate *)todayAtMidnight {
    return [self daysFromNowAtMidnight:0];
    Please Suggest..

  • I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. Help!

    I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more.  I did a couple of thousand trashed images and half hour later, more arrived. There are a lot of images that seem off the internet, including gif.s, png.s. Help!

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

    Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
    Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
    Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
    Can anyone share their experiences and how to with me?
    Thank in advance.
    Katherine

    Hi Katherine,
    yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
    Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
    HTH
    Borys

  • HT4927 I have just downloaded iPhoto from the app store. The photo library from my old laptop was backed up on an external hard drive and I retrieved the photos from there.  Now when I open the photos on my new Mac Book Pro, they are small - am I missing

    I have just downloaded iPhoto from the app store. The photo library from my old laptop was backed up on an external hard drive and I retrieved the photos from there.  Now when I open the photos on my new Mac Book Pro, they are small - am I missing something?
    I am using 10.8.2 Mountain Lion btw

    I dragged the Photo library icon from the backup drive on to iPhoto on the laptop
    That means you imported one Library to another.
    Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    So the reason you're seeing small photos is because you're seeing the iPhoto thumbnails from the back up library.
    So, what to do?
    Do you still have the back up? If so, trash this bunged up library and restore from the back up again. HOw to restore will depend entirely on how you made the back up, but no version of restoring includes importing the library.
    Regards
    TD

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

  • My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    You have two devices....the Netgear and Time Capsule both configured to act as routers on the network. You only want one device providing this service.
    I suggest that you configure the Time Capsule in Bridge Mode as suggested to eliminate the Double NAT error. Unfortunately, the Guest Network cannot be enabled in this setting.
    No other adjustments are needed and everything else will operate normally...and the Time Capsule will still be providing your wireless network signal.
    Once the Time Capsule is configured in Bridge Mode, it would be an excellent idea to perform a complete power cycle on the network to allow things to reset properly.
    Just power off all devices on the network in any order that you want
    Wait a minute
    Start the Netgear device first, and let it run a minute by itself
    Start the Time Capsule next the same way
    Continue starting devices one at a time the same way until everything is powered backup
    The other option you have is to "ignore" the error and the light will turn green. The Double NAT error may...or may not cause some issues for you down the line. The next time that you update the Mac operating system, or update the firmware in the Time Capsule, it may likely change the Time Capsule to Bridge Mode automatically.
    If your Guest Network "disappears", you will know why this happened, and you will have to manually configure the Time Capsule again in Router Mode to provide DHCP and NAT services.
    Double NAT can also cause a slow down of web page loading. You may...or may not....notice this.

  • When trying to make calls the timer starts counting as if i am connected but i can't hear anything and my speaker button has turned blue

    when trying to make calls the timer starts counting as if i am connected but i can't hear anything and my speaker button has turned blue

    Did you use the latest backup after setting it up "as new device"? If yes, try again, this time without using the backup, maybe it contains damaged data causing your problem.
    If this does not bring any change, you should get it serviced.

  • Opening web pages in email has stopped working after upgrade of ios

    I cannot open web pages in email, or indeed even scroll them. only change recently as upgrade to ios 7. I can come out of mail and open in safari, but very annoying!!

    replicate the error and paste the error from defaultrace from server0\log.
    regards,
    snehal

  • Safari can not open this page because this address is invalid, Safari can not open this page because this address is invalid

    SAfari can not open this page because this address is invalid

    I have the same problem and this is what I get, http://,k/

  • [CS3][JS] page.place(...) works for pdf, not for snippet

    Hi all,
    I'm having some problems with the page.place(...) command on InDesign CS3 Server.
    When I try to place a PDF on a page, it works perfectly. I can see the PDF on the document.
    But when try to place a snippet file, it gives me a very strange result.
    There is a frame on the document where the snippet should be placed, but it doesn't contain anything. You also cannot see it unless you select it.
    I can move the frame around, but not resize it.
    But when I copy and paste this frame, the newly copied frame does contain the contents from my snippet.
    When I try this on my desktop version it works correct, but not on the server.
    Here's the code I use:
    //set measurement to pt, just to be sure
    myDoc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.POINTS;
    myDoc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.POINTS;
    //place the snippet on the last page
    myDoc.pages.lastItem().place(new File("c:/mySnippet.inds"), [170, 400]);
    I managed to solve this by using the PDF place instead of snippet, but at a later stage I will have to use snippets, so it would be great to know what I'm doing wrong.
    Regards,
    Dany

    Hmm it seems that the snippet is placed on the first page, but for some reason, the coordinates are so wrong that it ends up on one of the following pages. that's wy I cannot select it.
    I attached the document, it's hard to explain.
    You can see two pages, all seem empty at first sight.
    When you click on the first page and do a ctrl-a to select all items, you can see that there is an item selected on the second page.
    Remarkable is that if I use the same code to place a pdf, the pdf is placed at the correct position on the second page.
    Is there something wrong with the coordinates when placing snippets, or am I doing something wrong?
    Dany
    Edit: I can't seem to reproduce this problem with a blank indesign file, which will probably make it hard for anyone to find the problem.
    Must be something else in the complete script that is causing this.

  • HT2534 I installed the Kobo app and the logo appears on my screen but when I try to activiate it, my password and email address is not recognizied.  Is my password the same as my Apple ID password?

    I installed the Kobo app on my Ipad mini and the logo appears on my screen b ut when I try to activate it a password is asked for.  I entered my Apple ID password.  Is this not correct?

    No, you need to use the account id and password that you've set up with Kobo, the app is linked to your account with them so that you can download your kobo purchases into it

  • Finding the value of the text starting from x1 and ending at x2

    Dear All,
    While reading a notepad's each line, I need to take the each lines value starting from say 15th position to 20th position. If i use it_notepad-text+14(5) and the text does not contains any data, it generates dump.
    pl. guide. Is there any function module to get the value of the string with starting and ending position.
    Regards,
    Vidhya

    I think the best is what G@urav suggested. Simple catching this exception will solve your issue
    data: word type string.
    loop at it_notepad.
       try.
           word = is_notepad-text+11(4). "get the required word
       catch cx_sy_range_out_of_bounds.  "and catch the exception in case the word is too short
       endtry.
    endloop.
    This way you won't get dump and will be able to skip the line which don't have required number of chars.
    Regards
    Marcin

  • I have pages '9 - I have not upgraded to Mavrickes but need to be able to open up pages docs that are made in the latest version. It seems hard or inpossible to create compatable files forearlier versions. Is this true?

    I have a client who has the latest pages. They are telling me that they can't create a compatible file for earlier versions ('9). I have not upgraded to mavrickes and cannot downlosd the latest version of pages. Is this true...the latest isn't compatable with earlier versions?

    That's clients for you:
    Menu > File > Export > Pages '09
    Peter

  • Firefox 4 crashes constantly, on opening, different pages, etc. Old firefox worked fine

    I updated to Firefox 4 on my vista laptop. I am running no redirect and a script blocker, both compatable with firefox 4. Firefox 4 keeps crashing, will keep loading the "well this is embarrassing" page, even when it starts normally, I will load a page, and within a few minutes, firefox will redirect to that page, then crash

    This is happening to me '''every single time''' I leave firefox unattended (minimized) for a a few hours. When I come back and open a new tab it just freezes out...
    This is so frustrating and it never happened with old firefox.
    I'm running on Windows 7.
    PLEASE HELP!

Maybe you are looking for