I created four (4) similar two (2) page file tables as an inventory of the contents of four (4) file crates full of LP vinyl record albums. How can these four (4) files be merged into a single file, then arranged in alphabetical order (by artist)?

I am using "pages" version 5.5 (2109) as updated in its newest version after installing Yosemite OS X 10.10 on my 21.5 inch Mac desktop computer. When I printing the second file as a two sided document on a single sheet of paper, it only printed the first side. I looked at the copy of the file on my screen, and saw that the second page was also blank on my screen. I opened the original locked version of the 68 row, 4 column table, and found that both pages, 34 rows on each page, were intact, but when I saved it again, locked it, and reopened a duplicate copy, the second page again was not there. I ended up printing a copy of the original file, but I am nit able to save more than one page of the two page original. I would like to do this so I can edit the list without altering the original. I would eventually like to merge all four tables into one document, than arrange the entire merged file in alphabetical order. I would like to do this and have not been able to. This was the original question I had before I lost the second page of the second file table.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Similar Messages

How can i quick edit Audio( increase bass) of a single file?

Hi everyone,
Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
THanks

ok.
"Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
1) How do i copy the attributes after making the changes??
2) How do i paste the attributes onto the next file?
Thanks.
Re: How can i quick edit Audio( increase bass) of a single file?

How can I incorporate an overlay with fields into a PDF file?

Once a week, I produce a timesheet. It's a PDF document generated by a third-party time-recording app, and it has room for hand-filling in signatures/dates/names, etc - 7 fields all told.
What I want to do is build a separate document containing an equivalent block of 7 PDF-fillable fields such that:
I can overlay the PDF-fillable fields on the space for hand-filling fields on the timesheet;
I can send the combined PDF file to another person in order to collect their name and (ink) signature.
I can then fill in my own (ink) signature, etc.
I can do the same thing week in, week out with no fiddling of fields, etc.
I got tantalizingly close (I have Windows Acrobat X Pro). I built the PDF-fillable form as a separate PDF, and merged it into a sample timesheet as a Background (and I also tried using a Watermark). However:
some of the seven PDF-fillable fields simply vanish;
one of the remaining fields seems to have picked up a name and formatting from another deleted field (is there some kind of uncleared cache in play?);
all the remaining fields were marked as Read-Only.
Update:
FWIW, I got it to work by reversing the files - i.e. by using the timesheet itself as the background.
When I add the Background (regardless of which is the main document), I get a series of warnings indicating that fields in the Background bearing the same name as those in the main document will get lost, but from what I can tell, fields in the same location as those on the main document also get lost.
When I use the template as the main document, things fall into place and the scheme works.
However, the situation seems like a fairly routine one that should be easier to solve. Ideally, I'd like to build a layer on top of the timesheet form and save that layer as an overlay.
TIA
Josh

Did you ever figure out how to overlay something on a PDF form? I've created buttons to allow a user to change out the background, but I want to have an image and possibly other elements on that.

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

How do i merge all the files in a directory into a single file

I need to merge(or move) all the files(all are .txt files) in a directory into a single file?

Thanks Martin, but I was searching for an inbuilt class or a stream like the SequenceInput class that could do this for me.

M276 Unable to scan multiple pages into a single file

Hi, just bought the Laserjet Pro 200 M276nw, and when I scan multiple-pages documents, it generates one PDF document for each page scanned, but I want this multiple pages into a single PDF file. Anyone can help? Thanks so much

Yes it's possible. Use the Image Capture app. It has an option to scan PDF documents into a single file.

Multiple Idocs (DEBMAS06) into one single file

Hi All,
Multiple Idocs(DEBMAS06) are sent from SAP in bulk to be sent to FTP server via XI...(Cannot use Append the file as The structure is with Header,Detail(all the idoc details) and Trailer)
I have seen different threads which speaks about the same,
But Please suggest me the best approach to proceed with this kind of scenario...
Multiple IDocs -> XI -> Flat file which is speaking about BPM and also Packaging(SAP note 814393)
and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b
(How Tou2026 Send Multiple IDocs Within One XI Message)
I prefer not to use BPM... but if required then....
Please suggest me which is the best approach to proceed with it..
Thanks and Regards,
Sridhar Reddy

Hi ,
I had tried the scenario Multiple IDOC's coming from R/3 and send all of them into a Single File
But it did not work...
Of course i changed as Micahel mentioned in
The specified item was not found.
(Collect and make pack size to 50) but still the idocs are posting as 50 messages in XI and 50 files are being created ...
But as per his remarks we need customization which is very difficult...
And also i checked Michaels blog
The specified item was not found.
But this is dicussing reverse of my scenario...
and finally i am thinking of going with the stefens weblog...
Collecting IDocs without using BPM
Can any one please suggest any other best way to handle this...
Instead of going for BPM i am implementing as Stefen suggested ... This is because we have many such interfaces where SAP sends collective idocs....
Regards,
Sridhar Reddy
Edited by: sridhar reddy kondam on Oct 22, 2008 6:20 AM

Can I Create Chapters Separately in iBooks Author and Merge Into a Single iBook?

In a print page layout package like InDesign, chapters of a book can be created separately and then merged into one book file. Is it possible to do that to create an iBook in iBooks Author?
Thank you.

Yes, it is possible and very easy to do.
If you want your chapters/sections/pages to have the same layout and colour scheme... make your template and and save as template - or use teh same free template for each chapter.
Create a Master version - and it is to this you will eventually copy and paste youe separate chapters.
Just select and copy the chapter and open the master.. then paste in the left "Book" column.
If you are using different chapter layouts - It also takes its template and that also appears in the hidden Layout tree.
I use this method on every book, simply because it does not slow down the machine. A multi chapter book with videos and photo images makes a big file - which is slow to process every time you preview or check things.

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

Problem in reading no. of files and writing into a single file

Hi,
Iam with Problem in reading no. of files and writing into a single file....
Iam reading no. of files stored in local directory.......
Iam able to read and print the data in files successfully....but while writing..only first file is being written...and the next files are not written in my output file...
plz tell me my mistake....I hope Iam doing some mistake while writing into file...PLz help.....
Basically my code structure is like this....
import java.io.*;
import java.util.regex.*;
import java.util.*;
import java.text.*;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hssf.usermodel.HSSFWorkbook;
import org.apache.poi.hssf.usermodel.HSSFSheet;
import org.apache.poi.hssf.usermodel.HSSFRow;
import org.apache.poi.hssf.usermodel.HSSFCell;
class Writing {
public static void main(String args[]) throws Exception {
          FileOutputStream fileOut = new FileOutputStream("ServerResult.xls"); //my output file
          int counter = 1;
          File dir = new File("C:/Perform/ServerLogs");
          String[] children = dir.list();
          if( children == null)
               System.out.println("The Directory mentioned does not exist");
          else {
               for (int fileNo = 0; fileNo < children.length; fileNo++ ) {        //Files iteration starts
                    String filename = children[fileNo];
          File logFile = new File(filename);
FileReader logFileReader = new FileReader(logFile);
BufferedReader logReader = new BufferedReader(logFileReader);
StringBuffer sBuf = new StringBuffer(5000);
          HSSFWorkbook wb = new HSSFWorkbook();
          HSSFSheet sheet = wb.createSheet();
          HSSFRow rowTitle;
          HSSFRow rowReq;
          HSSFRow rowRes;
String aLine = null;
boolean skip = false;
boolean readed = false;
boolean initReq = false;
          boolean flag = false;
long requestTime = 0;
long responseTime = 0;
long recdTime = 0;
long sentTime = 0;
          long hasTime = 0;
          long presentTime = 0;
          int hasCalls = 0;
Pattern startMessage = Pattern.compile("^<MESSAGE.*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern requestMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<ActName>(.*)</ActName>.*", Pattern.DOTALL);
Pattern requestMessage1 = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<Svc id=\"(.*)\">.*", Pattern.DOTALL);
Pattern responseMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"HostConnInit\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initResMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*", Pattern.DOTALL);
Pattern initResIDMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*<IATA>"+args[0]+"</IATA>.*", Pattern.DOTALL);
          Pattern sentMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgSentInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
          Pattern rcvdMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgRcvdInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.SSS");
DecimalFormat dcf = new DecimalFormat("########.##");
String actName = "";
          if (fileNo ==0)
          rowTitle = sheet.createRow((short)0);
          rowTitle.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)0).setCellValue("Req/Res");
          rowTitle.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)1).setCellValue("Action");
          rowTitle.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)2).setCellValue("Server Time(in ms)");
          rowTitle.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)3).setCellValue("Request Vs Response Time in Server(in ms)");
          rowTitle.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)4).setCellValue("Time Taken By HAS/HOST(in ms)");
          rowTitle.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)5).setCellValue("No. of HAS calls");
          rowTitle.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
          rowTitle.createCell((short)6).setCellValue("Data Size");
          //wb.write(fileOut);
while((aLine=logReader.readLine()) != null) {
if(aLine.startsWith("<MESSAGE TYPE=\"EVENT\"")) {
Matcher m = startMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
initReq = false;
m = initMessage.matcher(aLine);
if(m.find()) {
initReq = true;
} else {
if(initReq) {
m = initResMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
} else if(aLine.startsWith("</MESSAGE>")) {
if(!skip) {
sBuf.append(aLine);
readed = true;
} else if(!skip){
sBuf.append(aLine);
if(!skip && readed) {
String tempStr = sBuf.toString();
if(tempStr.length() > 0) {
boolean reqMatched = false;
Matcher m = null;
if(initReq) {
m = initMessage.matcher(tempStr);
actName = "Intialization";
} else {
m = requestMessage.matcher(tempStr);
String time = "";
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
} else if(!initReq){
m = requestMessage1.matcher(tempStr);
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
if(time.length() > 0 ) {
try{
requestTime = sdf.parse(time).getTime();
}catch(Exception ex){}
System.out.println("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
                              //bw.write("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
                              String reqDataSize = dcf.format(((double)time.length()/1024.0))+"K" ;
                              rowReq = sheet.createRow((short)counter);
                                   rowReq.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)0).setCellValue("Request");
                                   rowReq.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)1).setCellValue(actName);
                                   rowReq.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)2).setCellValue(time);
                                   rowReq.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)3).setCellValue("");
                                   rowReq.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)4).setCellValue("");
                                   rowReq.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)5).setCellValue("");
                                   rowReq.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
                                   rowReq.createCell((short)6).setCellValue(reqDataSize);
                                   counter = counter +1;
                                   System.out.println("counter is "+counter);
                         Matcher l = sentMessage.matcher(tempStr);
                         Matcher k = rcvdMessage.matcher(tempStr);
               if(l.find()) {
                                        for (int i=1; i<=l.groupCount(); i++) {
     String groupStr2 = l.group(i);
try{
sentTime = sdf.parse(groupStr2).getTime();
}catch(Exception ex){}
                    if(k.find())
                                             for(int j=1;j<=k.groupCount(); j++) {
                                             String groupStr1 = k.group(j);
                                             try{
recdTime = sdf.parse(groupStr1).getTime();
}catch(Exception ex){}
                                             presentTime = (recdTime - sentTime);
                                             hasTime = hasTime + presentTime;
                                             hasCalls = hasCalls +1;
if(!reqMatched) {
if(initReq) {
m=initResIDMessage.matcher(tempStr);
} else {
m=responseMessage.matcher(tempStr);
if(m.find()) {
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
try{
responseTime = sdf.parse(groupStr).getTime();
}catch(Exception ex){}
                                             String resDataSize = dcf.format(((double)tempStr.length()/1024.0))+"K" ;
                                             rowRes = sheet.createRow((short)(counter));
                                             rowRes.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)0).setCellValue("Response");
                                             rowRes.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)1).setCellValue(actName);
                                             rowRes.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)2).setCellValue(groupStr);
                                             rowRes.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)3).setCellValue((responseTime - requestTime));
                                             rowRes.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)4).setCellValue(hasTime);
                                             rowRes.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
                                             rowRes.createCell((short)5).setCellValue(hasCalls);
                                             rowRes.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
                                             rowRes.createCell((short)6).setCellValue(resDataSize);
                                             hasTime = 0;
                                             hasCalls = 0;
                                             counter = counter + 1 ;
sBuf.setLength(0);
readed = false;
          wb.write(fileOut);
          } // End of for (int fileNo = 0; fileNo < children.length; fileNo++ )
}     //End of else
          fileOut.close();
} //End of public static void main
} // End of Class

First of all, use [code]-tags to make your code readable, please.
I didn't do a complete inspection of your code (because it's too much and unreadable as it is) and I don't know POI, but creating a new HSSFWorkbook for each input file sounds fishy to me ... try re-using the workbook and just creating a new sheet in each iteration.

How do I combine several pdf files into a single file (MAC OS)?

How do I combine several pdf files into a single file ?
MAC OS 10.6.8
Adobe Reader 11.0.10
Signed: Ken, in Utah

Not possible with Reader. You need Acrobat or a subscription to something like PDF Pack to do it.

How do I extract multiple tracks from a CD into a single file in Audition CS6?

I use Audition to edit my Pastor's messages. The message CD is made with five minute tracks. I want to extract the tracks from the CD into a single file for editing and altering the track lengths. I have done this before in Audition CS6, but I haven't been able to find instructions for it. I only found a note stating this is available in AuditionCC.

I have discovered an answer to my problem. The way to bring multiple tracks into Audition CS6 from a CD is to use the FILE / OPEN APPEND / TO NEW command. This brings the separate tracks into a single file in Audition CD6. Thanks to everyone who commented.

Need Infospoke retracting into a single file

Hi sdn,
I'm doing infospoke to retract the data from cube and put it into a flatfile.
But i'm getting 2-flatfiles one with header and one with data-The requirement is we need the data & header file to be into one file once we do retaction from a cube.What steps should i do for retracting the data into a single file.

Hi Sunitha,
go thru these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
https://websmp209.sap-ag.de/~sapidb/011000358700002201112003
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f4/5c983cff567f5de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Assign points if helpful.
Thanks,
Amith

How many files that JAR can bundle into a single file?

How many files that JAR can bundle into a single file?

The are no limitations inherent in the ZIP file format (jar files are basically just zip files).
The only limitations I can think of are;
available disk space
maximum file size (for some filesystems)

I created four (4) similar two (2) page file tables as an inventory of the contents of four (4) file crates full of LP vinyl record albums. How can these four (4) files be merged into a single file, then arranged in alphabetical order (by artist)?

Similar Messages

Maybe you are looking for