I deleted contents from pages school report by accident. is there any way to get it back. I reopened the file and it is blank, I deleted the contents from a school report by accident. is there any way to get it back. I reopened the file and it is blank

I opened a file to print and by accident highlighted and deleted the content. Then in a panic I closed the file and now when I open it is blank. Is there any way to get it back.  I have looked and can not see anyway. I dont have anything in my backup?

I'm not sure about older versions, but in Pages 3.x (OS X 10.9.x) select File > Revert To > Browse All Versions.  Hopefully there will be an earlier version that you can "revert to".

Similar Messages

  • Hi, I would like to know how can I recover a document from pages that I didn't save anytime and instead of clicking the button save I clicked the delete button at the end. Is there any way to recover it?

    Hi, I would like to know how can I recover a document from pages that I didn't save anytime and instead of saving the doc I clicked the delete button. Is there any way to recover it?

    Regardless of application, the first step that I take is to save and name the current document — even if it has no content yet. With Pages, this good habit enables autosave. As you add content, your document revision history is restorable via the File Revert To menu. The delete key has the same document foreboding as only teaching a pet raven to speak "Nevermore."

  • I deleted a document from pages on my ipad. Is there any way to get it back?

    I deleted a document from pages on my ipad. Is there any way to get it back?

    You can restore from iTune or iCloud backup if you have one.

  • HT1657 my rental has reported a download error and cannot be downloaded or deleted - any suggestions?

    my rental has reported a download error and cannot be downloaded or deleted - any suggestions on how to fix it one way or another?

    Hello there, asim01.
    The following Knowledge Base articles offer a few pointers with troubleshooting issues with downloads from iTunes. First thing to try is verifying connectivity to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If the issue is related to an interrupted download:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Ultimately, if you are still unable to download your purchase, feel free to report the issue using the following information:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Pass parameter from page link to report

    <span><font face="Verdana, Geneva, Arial, Sans-serif" size="2">How can I pass 3 parameter values from a link on one page to a report or CrystalReportViewer.<br /><br />Report is a CR/VS 2005 web report in C#<br /><br />Parameter fields in the report are:<br />   CampaignID<br />   BeginDate<br />   EndDate</font> <p><font face="Verdana, Geneva, Arial, Sans-serif" size="2">So say link page URL looks like this:<br /></font><a href="http://localhost/reports/campaign_report/default.aspx?CampaignID=61325&BeginDate=1/1/2006&EndDate=1/2/2006" target="_blank" title="http://localhost/reports/campaign_report/default.aspx?CampaignID=61325&BeginDate=1/1/2006&EndDate=1/2/2006"><font face="Verdana, Geneva, Arial, Sans-serif" size="2">http://localhost/reports/campaign_report/default.aspx?CampaignID=61325&BeginDate=1/1/2006&EndDate=1/2/2006</font></a><br /><font face="Verdana, Geneva, Arial, Sans-serif" size="2">and I want to pass these values to the report and bypass the Parameter Prompt Page.</font></p><p><font face="Verdana, Geneva, Arial, Sans-serif" size="2">When i run this link the report viewer page says "missing parameters"</font></p><p><font face="Verdana, Geneva, Arial, Sans-serif" size="2">Do I need to add something to the default.aspx.cs page?<br /></font><font color="#0000ff">--<br /><br /><font face="Verdana, Geneva, Arial, Sans-serif" size="2">protected</font></font><font face="Verdana"><font size="2"> <font color="#0000ff">void</font> Page_Load(<font color="#0000ff">object</font> sender, <font color="#008080">EventArgs</font></font></font><font face="Verdana" size="2"> e)<br />{<br />     Parameter.Field1 = (CampaignID);<br />     Parameter.Value1 = Request.QueryString("CampaignID");<br />     ...??<br />}<br /><br />--
    <br /></font><font face="Verdana" size="2">Any help would be greatly appreciated?<br /><br />Thank you,<br />Jason</font> </p></span>

    Â Hi Jason
     You are correct. The Viewer object will not automatically look at the URL and try to assign the values. You need to grab these values from the URL and properly assign them to the parameter objects.
    Rob Horne
    [My Blog | /blog/10]

  • Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    No.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Submit report to spool,  from page 2?

    Dear experts,
    I need to send a report to spool via the "submit" command through my program, but I want to print pages from 2 to the end.
    SUBMIT rls10020 WITH s1_lgnum = lrf_wkqu-lgnum
                    WITH s1_lgtyp IN r_lgtyp
                    WITH s1_lgpla IN r_lgpla
                    WITH p_vari   = disvariant-variant
                    TO SAP-SPOOL
                    DESTINATION pri_params_pdest
                     IMMEDIATELY 'X'
                    WITHOUT SPOOL DYNPRO
                    AND RETURN.
    there seem to be no parameter available to send my request "FROM PAGE = 2".
    although if i send it to spool and go from sp01 to pint with changed parameters I can do it.
    Please help. Is there any parameter available for this?
    Thank you,
    Roxani Athousaki

    Hi,
    use this code:
    DATA: number           TYPE tbtcjob-jobcount,
          name             TYPE tbtcjob-jobname VALUE 'JOB_TEST',
          print_parameters TYPE pri_params.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = name
      IMPORTING
        jobcount         = number
      EXCEPTIONS
        cant_create_job  = 1
        invalid_job_data = 2
        jobname_missing  = 3
        OTHERS           = 4.
    IF sy-subrc = 0.
      SUBMIT submitable TO SAP-SPOOL
                        SPOOL PARAMETERS print_parameters
                        WITHOUT SPOOL DYNPRO
                        VIA JOB name NUMBER number
                        AND RETURN.
      IF sy-subrc = 0.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = number
            jobname              = name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDIF.
    From jobnumber you obtain the spool number.

  • I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again?

    I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again. If I go to attempt to rebuy it, then it says thhat I technically already bought it but it won't download.

    Audiobooks are not available for redownloading, so you need to transfer them from your old computer, or get them from your backup. How did you copy your iTunes contact from your old computer to our new one?
    Regards.

  • Hi , i bought an iphone offline and the person whom i bought it from did not sign out of their icloud/apple id account and it wont let ne delete it w/o answering security questions or having the password is there a way i can possibly delete the account?

    i bought this phone three months ago off of craigslist and annoying little messages keep popping up asking for his apple id and when i go to delete the account it also requires a password i have contacted the guy multiple time about the situation and he says he cant seem to remember the password the phone works really well so it wasn't that much of a rip off i just have this minor issue with it

    It will stop being a minor issue if you have to restore the phone for any reason. No, there is no way to sign out of the account without the password.

  • HT1766 I just got a 5s and had taken some pictures. Then I plugged it into my PC and set it up using my previous backup from my iPhone 4. Now the pictures I had taken are gone, is there any way to get them back?!

    I just got a 5s and had taken some pictures. Then I plugged it into my PC and set it up using my previous backup from my iPhone 4. Now the pictures I had taken are gone, is there any way to get them back?!

    Sorry no as you wipe the current data when you restore from your backup.

  • The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    maggielou wrote:
    I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed.  However, a few of the recent pictures have shown up on my phone.
    IHow could I get these from my MacBook to my phone?
    Thanks again.
    When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups.  You can't view the backups.
    Look at the two links I provided.
    You still didn't answer any of my two questions I asked.

  • Reports - "Derive from Page Item" Missing in APEX 3.0.1?

    I installed a patch 3.0.1.
    I can't find on the list of formats in report queries option:
    "Derive from Page Item"
    But, in help window for the list of formats I can read:
    "The format attribute specifies the download format for the report query.
    Report queries can be downloaded as PDF documents, Word documents (RTF
    based), Excel Spreadsheets
    (HTML based) or as HTML files.
    To determine the download format at runtime of the application, choose
    "Derive from Page Item"."
    Where is "Derive from Page Item" option?
    Best Regards
    Daniel Kozlowski

    Option "Derive from page Item" is still available in 2 places:
    1. "Shared Components -> Report Queries -> Create Report Query" on last
    "Create Shared Query" window.
    I can choose it from "Output Format" list.
    2. In report properties on "Print Attributes" tab.
    I can also choose this option, from "Output Format" list.
    Of course, above options still doesn't work correctly.

  • HT1688 My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can del

    My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can delete it?

    Thanks - the only thing is for a long time it would not allow my to select Edit - I tried it but - what ever - this time it did - THANKS - Mark

  • Why is there no simple way to delete unused reference pages from multiple FM files?

    I have hundreds of files in which some, but not all, of the reference pages are not being used. I don't want to open each file and manually click each page and then delete the pages one by one... what can I do to fix this? I think the files were all created with the same template but ironically the author imported graphics (by reference) onto the reference pages. The path to the referenced graphics (which are located on the reference pages) is invalid, and now all the FM files have errors. I am not a framemaker master, so this may be a simple fix, but I can't figure it out. I tried opening a file (file A) and deleting the unused reference pages. Then I saved it as a new file name (file B) and tried to import the reference pages of "file B" into "file A". This did not work. It just added additional reference pages to file A. I just want to be able to generate a list of reference pages for the files and then only delete the ones that I don't need. Please help. Any suggestions???

    IF the imported graphics are still being used, then when you open a file with a "missing" graphic,  FM does ask where the missing file(s) is located and will use this information when searching for other missing graphics in other files of  book. You could try creating a temporary superbook that contains many of the files and then doing an update. Otherwise, deleting "unused" Reference pages doesn't really gain you anything (and you could potentially mess up some paratags if they are using any of the reference frames on any of those pages).
    When you import formats into FM files from another, FM uses and additive model, i.e. identically named objects are replaced and new ones are added. Nothing is removed.

  • Is there any way to recover deleted documents in pages?

    Is there any way to recover deleted documents in pages, or off of icloud?

    Youi can look in the Trash. If it hasn't been emptied, the file may still be there.
    Jerry

  • My DW CS4 pages wont show on browser until I deleted recordset from pages. Why any one?

    Greetings,
    After designing my search and blog site, and went on to try to add image upload so clients and visitors could upload images, to the site, but instead things fell apart shortly after that.  I started to have serious design problem.
    I start to witness problem with the recordset on the registration page, login page search and the rest of the recordset where ever they live in the design. Presently, I am using MSN SQL SERVER 2005 for my database and I didn’t see any problem using it. I also used msn access in the past before turning to SQL.
    Haven’t said all these, my question are to see if any one knows how to fix my problem.
    PROBLEM: When I open any of the pages to test my design, the page will not open on the browser. It will rather point to recordset on the error 404 page and soon the recordset is completely taken out of the page, the page will then open on the browser. Does any one know how I could fix the problem I have with Dreamweaver CS4?
    Thanks.
    Joplateau.

    You have scripting errors on the page. First step is to turn off friendly error messages in your browser to see if it will provide more meaningful error messages. However, since it's a 404, it could be that your host has disabled detailed error reporting as a security measure. Try to get that enabled so you can see the details of the errors. Without that, it's nearly impossible to troubleshoot.

Maybe you are looking for