I did a software upgrade to IOS6 and my Iphone4S is now unable to update. Do I lose all my contacts and calendar entries when I restore?

I did a software upgrade to IOS6 and my Iphone4S is now unable to update. Do I lose all my contacts and calendar entries when I restore?

You should be syncing all your contacts and calendars with your computer, either via iCloud or iTunes, so it is easy to re-sync them back to the phone after you restore.

Similar Messages

  • HT1414 I attempted to update my iphone 3 through I tunes - I think I did a back up on my pc - I am now unable to use the phone at all - it cannot be turned off and seems to be syncing all the time, even when it is not connected to itunes.

    I attempted to update my iphone 3 using itunes.  I'm not certain but I believe I did a backup on my pc first.  I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive.  I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc.  I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?

    Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.  If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it.  If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
    You can check in iTune to see if you have a backup.  They are listed in iTunes>Preferences>Devices.  However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists.

  • HT1766 I want to restore my iPhone to the backup I did just before upgrading to iOS6. Today's sync/backup erased most of my contacts and almost all of my phone numbers within the remaining contacts.  No iCloud backup because of other issues still to resol

    I want to restore my iPhone to the backup that I did just before upgrading to iOS6.  When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS.  I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL.  visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet.  Thus, I am backing up to iTunes.
    This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone.  I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
    Since I had a backup just last week, I'd like to just go back to it.  But how?  Or, is there another way to get my contacts restored?  And why did they disappear?  And what else may be gone that I just don't know about yet?

    I want to restore my iPhone to the backup that I did just before upgrading to iOS6.  When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS.  I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL.  visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet.  Thus, I am backing up to iTunes.
    This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone.  I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
    Since I had a backup just last week, I'd like to just go back to it.  But how?  Or, is there another way to get my contacts restored?  And why did they disappear?  And what else may be gone that I just don't know about yet?

  • I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light

    I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light.
    I cant even get into itunes because it wont recognize it to do a reboot or a rollback.

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • My aps won't open.  Installed software upgrade last night and now my apps (3G S) won't open

    Last night I did a software upgrade and now when I try to open my aps they blink and do not open.  What's the fix?

    I have a brand new 4G, just got a request to update to OS5.0. so I did that.  I can't download a single game, all of which are free.  After I get the ridiculous message about "Terms and Conditions" having changed, I accept it but it never does anything, just says "Loading" and never gets the app, it doesn't show up in my download history, and no icons on the screen.  Other apps just say "Waiting" and never do anything either.  I have an awesome connection and signal to my router, and all other features of the phone work.

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How can I get rid of ios6 ? I have had this iPad for less than 2 weeks and,ade the mistle of "upgrading" to ios6 and now my map is completely useless.  Feel like I have been robbed

    how can I get rid of ios6 ? I have had this iPad for less than 2 weeks and made the mistake of "upgrading" to ios6 and now my map is completely useless.  Feel like I have been robbed

    There are alternatives. But none of them have Google street view, able to work on iOS 6. Apple should have offered this as a beta version, for a few more months instead of inflicting us with an inferior product. This iPad will probably be my last Apple product. A shame, because until last a few days ago, I thought the iPad and iPhone were fantastic.
    Apple should quit their petty squabbling with, Google and Samsung and concentrate on supplying the best product.
    Google and Samsung must be enjoying this particular fiasco.

  • After I did a software upgrade, my photo booth is hazy.  Is there a fix for this issue?

    After I did a software upgrade, my photo booth is hazy.  Is there a fix for this issue?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I downloaded 6 software to my phone and is fine, when I did my wifes it deleted all of her contacts and she isnt backed up to outlook,  Please Help

    I downloaded 6 software to my phone and is fine, when I did my wifes it deleted all of her contacts and she isnt backed up to outlook,  Please Help.  I used the same account login/password for the icloud part....

    Why would you use the same iCloud login?  Do you and your wife share that account for syncing contacts?
    Was she actually syncing contacts to any supported app on the computer or a cloud service prior to the update as the iPhone is designed to be used?
    Did you not backup the iPhone prior to the update?  If this had been done, it should be a simple matter or restoring from that backup to put everything back.

  • HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    Lilasil wrote:
    The message displayed suggests to return the iPhone to factory settings (which I cannot do).
    Why not?

  • Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

    My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject.  I was using a cord that went from larger square plug to larger square plug.  So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

    Thanks, Michael!  I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed.   Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
    Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk.  Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait.  :-) 
    Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed? 
    I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest?  Two external hard drives?  I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB.  If this one is not reparable I could get two and do the same thing.  I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
    What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

  • I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

    I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

    Try to perform SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Then try a safe boot:
    http://support.apple.com/kb/HT1564
    Ciao.

  • HT201401 upgraded to OS6 and found that when in silent mode the vibrate function is not working though i have set the vibrate mode on upon silent

    upgraded to iOS6 and discover vibrating not working while in the silent mode

    Silent or Do Not Disturb. DND will suppress the vibrations as well as sound.

  • I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

    I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

    Backup is your best option if you have one. Reverting software will not bring the contacts back.

Maybe you are looking for

  • "All Photos" album order mixed up after restore (device change)

    I recently had to back up and restore an iPhone 6 to a new iPhone 6. I did a full backup to iTunes, then restored to the new iPhone 6 from that backup. Everything was restored, including all photos... (I have iCloud Photo Library turned on)... EXCEPT

  • Coming back after long layoff

    I used DW for 4 years, but have not done anything web related for the last 3 years and latest version i have is DWMX. Here is what I am wondering. A friend of mine came to me with a business idea and my responsibility would be creating a website. Her

  • My macbook OS X 10.5.8 has just quit loading google, any ideas?

    For some reason I cant load anything with google, also my kindle app just quit working - is anyone else having similar problems?  This all happened within the last week

  • Managing existing keywords with Controlled Vocabulary

    Hi, my photos (10,000 RAW/JPG's) were previously keyworded in another application. I just imported David Rieck's Controlled Vocabulary keyword file into Lightroom 1.1 and now I have a mess of keywords. Any suggestions on how best to mange the keyword

  • Standard Procedure to find out the hardcoding

    Hi Experts, What is the standard procdure to look for whether any hardcoding is existing in the system ....???? Thanks in Advance, Praveen