I did not find a problem with any solution for my 3gs phone What is the solution for you!!
IPhone 3gs is open internationally and does not accept activation after the
update oi5 brother..
You may peace and God's mercy and blessings
The problem in short was not able to activate the device 3gs
IPhone open. Not locked
Tried by the Wi-Fi and through iTunes I could not
According to iTunes SIM message is found in several segments of tried and I could not activate
Is there a solution for the operation of the device or restore the previous version ???????
What is the solution
What is the solution
Similar Messages
-
I have a new IPhone5c and do not receive texts or calls sent from my daughter's phone; I'll call this phone 2. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot? My other daughter has a new IPhone5c too. She receives calls and texts from sent from phone 2. Any tips for remedying this problem?
Thank you.Turn off iMessage in your phones settings. Apple devices can only use iMessage to other Apple devices.
Turning off iMessage will allow the messages to go as regular text messages. -
Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad. I tried to reinstall iTunes. That did not address my problem. Any suggetions on what I should do?
Hey Bob0725!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?
Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?
If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections. -
iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!
I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance.
Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows. -
When the Mac is awaken from sleep mode the screen is white. I can hold the mouse button down and sweep the screen and the desktop reappears and everything works as normal..This just started and I am concerned that some hardware, video card or video memory is failing. Has anyone else had this problem and what was the solution?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
V1.1 - Continuous Crashes! Did not have this problem with 1.0
I posted a couple of days ago, still no changes. This is ridiculous. Adobe, why would you put out a faulty update? I had no crash problems with version 1.0 and though on the surface v 1.1 APPEARS to be faster, I can never keep the program on long enough to truly find out. When I try to change an image star rating or undo a processing edit, I get nothing but crashes...literally every couple of minutes.
Now I've been having problems unistalling v1.1 so I can re-install v1.0. This is extremely frustrating, what are we supposed to do for help?
System:
PC Windows XP service Pack 2
P4 3.2ghz
2.5 GB of RAMWell, one issue that you may be having is that your hard drive is
reaching the practical limits of capacity, and is probably horribly
fragmented.
At 90% capacity a system drive basically becomes unusable, you are at
83% capacity.
It's something that needs attention that you might want to take a look
at, since for a given library LR creates a billion gazillion files and
folders (or at least it looks that way), and it becomes VERY disk
intensive regardless of actual RAM.
When you say it didn't see your previous catalog, have you tried opening
and converting some old backup that you may have of the V1.0 versions. I
haven't really been following this thread, but many people are just
having trouble FINDING their old library for V1.1 to open and convert...
once they find the old library, everything is hunky-dory. You may want
to do a global search for " *.lrdb "
[email protected] wrote:
> My pc is Dell system is about 1 1/2 year old. I upgraded memory = (1)x512 & (2)x2gb.
>
> I currently only have about 25gb of free hard drive space on my 145gb drive.
>
> I'm not sure why v1.1 would have problems running on the system when 1.0 was fine.
>
> I have finally successfully uninstalled all to do with previous 1.1 installation and since it did not see my previous catalog, I set a default and am now importing a couple of image collections that were previously worked on in v1.0. So far so good but the test will be once I start batch editing and rating again. (side note, importing seems faster, especially when not rendering standard size previews.)
>
> Thank you both for responding and will continue to post results. *fingers crossed* -
None of my security settings are being changed and this is not being caused by any anti spyware program. if I go back to 3.6 i do not have the problem. I have reinstalled FF4 and now, 4.0.1, thinking it might be corrected but still the problem persists and I get tired of having to reenter login information for 20 or more websites every couple of days.
I also had terrible issues with 2 Wire Gateway and my mid-2010 MacBook Pro. We changed to WPA2 and that seems to have fixed the problem. The AT&T tech support person, Phillipines, was extremely helpful. She went through network settings with me. One interesting step was going into my DNS tab (Network Preferences and then Advanced Button) and replacing my entries with these:
68.94.156.1
68.94.157.1
It's been several days and I've only seen a few random packet drops. Still charging along at full signal strength. -
Hello,
I have no idea what to do. Every time I try to connect, within seconds it disconnects... Because of this, I cant update my apps because they are over 50MB. So most of my apps are frozen...I also have this problem. One additional symptom is that though I can log on momentarily, almost immediately it disconnects me from WiFi, then brings up a "Log In" page with Apple's version of a 404 error. The URL that it appears to be trying to connect to is www.apple.com. Have tried powering down my phone, cycling my modem and router, re-entering my AppleID, forgetting the network and rejoining. Nada. Home network using Airport. This didn't happen while at work where we don't use Airport.
This only happens with my iPhone 4S. My iPad 2 works just fine. -
I am unable to access the iTunes store even after installing the latest version of iTunes. My OS is Windows 7 and none of the solutions I have found online have resolved my problem. Anyone else having this same problem?
Without details about the problem it's very difficult to offer useful suggestions, but try this:
1) Click on your Start menu.
2) Go to Accessories
3) Right-click on the Command Prompt application and choose "Run as Administrator".
4) Once it opens, type in the following command...
netsh winsock reset
5) hit Enter and it should say something like Winsock reset successful.
6) Reboot your computer and try the iTunes Store again.
Regards. -
Don't want to have to pay again to have it unlocked.
makadan wrote:
local phone shop.
Then your iPhone was not unlocked legitemately ,it was hacked to unlock it
You may not get a replacement ,hacking voids the warranty and you can have NO support or help from Apple or on this forum 3
If you do get a replacement it will certainly be locked to O2 as the iPhone status on Apple Activation servers is locked -
The Windows 7 is on a new Dell Inspiron desktop. The Windows Vista is on a Dell Studio laptop that I have had for a while. The Hotmail also works fine on the new computer when I use IE9.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.2 r152
# Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
*http://www.mozilla.com/plugincheck/
Update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the Java plugin to the latest version.
*https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE) -
firefox wont update the mailbox to inform you you have new mail.
preivious version was ok.
all settings are correct .
tried starting new and still the sameSorry, that "mail" thing isn't a standard part of Firefox. Seek support from the developer of the add-on you have installed that added that feature to Firefox. Support contact information should be on the download page for that extension.
Maybe you are looking for
-
Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*
Greetz, I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe di
-
Fonts not showing up in Flash CS5
Maybe I'm missing something simple but I just can't get some fonts to appear in Flash cs5 on mac osx. they work fine in Photoshop / Illustrator, but don't appear in Flash. Any ideas?
-
My ipad 3 keeps getting stuck in headphone mode, i have tired many fixes - help!
So I as I said, my ipad keeps getting stuck in headphone mode. Sometimes I can get it out is I soft reset my phone (hold home and wake/sleep button) but other times not. I have reinstalled my ipad software, cleaned the hole with a cotton bud, played
-
Best way to implement conclusion date for service ticket
Hello Folks, I have to fix, part of a crm implementation in a customer, and I was thinking what´s the best way to reimplement/reconfigure the conclusion date (or to do by) in a service order ticket. I was checking the crm 5.0 best practices, and I fo
-
SQL Server - cannot open table
Hi all - has anyone experienced this problem? Using SQL Server 2000 and CF5. We run reporting queries on one table in the database which link to another database server (using 'servername.dbname.dbo.tablename/viewname' in the queries to refer to the