I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?

Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.

Similar Messages

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

Hold down shift as you right-click > Get Info to get the old style dialog box.
tt2

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

My iPhone 4 does NOT supported iOS 7...

My iPhone 4 (16 GB - White) does NOT supported iOS 7.., and because my iPhone device has been Discountinued already since October 4, 2011..
Some other iPhone 4 supported iOS 7 (only 8 GB capacity storage) below on Wikipedia, NOT mine as 16 GB...
http://en.wikipedia.org/wiki/IPhone_4
Now my iPhone 4 (works with T-Mobile) supported iOS 4.2.1, right now... NOT supported iOS 7, because it's passed out of date is Discontinued since October 4, 2011..

DamienLu12 wrote:
Humm... The compatible are difference on iOS versions with each Apple iPhone (capacity storage) below:
1. Version iOS 4.2.1 is now compatible with iPhone 4 (16 & 32 GB)
2. Version iOS 5.0.1 is now compatible with iPhone 4S (32 & 64 GB)
3. Version iOS 6.1.3 is now compatible with iPhone 4 (8 GB) and iPhone 4S (16 GB)
4. Version iOS 7.1.1 is now compatible with iPhone 4 (8 GB) and iPhone 4S (8 GB)
5. New Version iOS 8 (Coming This Fall) will compatible with iPhone 4S (8 GB) during this Fall 2014...
My iPhone 4S (64 GB) does not compatible with iOS 7 or 8... Just kept using iOS 6.1.3 or older version as iOS 5.0.1...
That information is not correct

The timekeeping system we use does not like HTML 5 so what is the latest version of Firefox that does not use HTML 5?

We have been told by our timekeeping system provider that the latest versions of FireFox, Chrome and IE are not compatible with their websites at this time. I was told that it was because of the use of HTML 5 by the more recent versions of these web browsers. I need to download the most recent version of FireFox that does not use HTML 5. Can anyone tell me which version this would be?

It isn't "Timesheet Next Generation", is it? We had a thread on that here: [https://support.mozilla.org/questions/961306 Websites using php and mysql stopped sorting drop down lists properly starting last week. Did something change?]
Unfortunately, HTML5 is a large specification with a lot of parts that has been implemented in pieces over the course of several years. It would be really helpful if your vendor could indicate what EXACTLY is not compatible and then it could be researched. Otherwise, you'd have to use trial and error. Either way, you would end up with an older browser that isn't safe to run on the internet. It could be time to consider other vendors...

"The files are on a volume that does not support Trash. Would you like to permanently delete the item?"

Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
iMAC OSX 10.9.4.
LR 5.6,
Camara Raw 8.6
Any idea?
Please Help Me...
Thanks in advance
Jose

This is how I solved it, thanks to combined information posted on forums:
1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
2. Created a folder in new external drive >imported to LR->send to trash- empty trash
3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
5. Selected the pics -photo>remove> delete from disk
Done!!!
Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration .

Safari browser version you are running does not support community tool bar. what's that mean and where is it coming from or how do I get rid of it ?

I keep getting the message "Safari browser version you are useing does not support community tool bar." Where is this coming from and how do I get rid of it ?

That toolbar/ct plugin causes problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Why when i click to open safari does it keep telling me the safari browser version i am using does not support the community toolbar ?

Why when I am clicking into safari does a message appear telling me that the Safari Browser version I am using does not support the community toolbar ???

You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD. I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it? Thank you

Hello,
This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
Hope this helps:

The document is on a volume that does not support permanent version storage

Hi All
I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed ?
Thanks in adavance.

Mate
That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
This does seem to be Apple problem if you read this article
http://support.apple.com/kb/TS4218
the issue i am having is this .
if i create a text file in windows with notepad and save it on a nas drive.
inside a text file i will have
this is a test
i go to my mac open the text file with textedit and add following text in new line
this is test 2
now i go back to windows box open same text file you will see that following
this is a testthis is test 2
basicly what it does it puts it on same line as the first line.
and this all use to be fine before 10.8.2
I am sorry if i came across rude i just need some help.

The document "PP_CS_Higher Education_USA_V1" is on a volume that does not support permanent version storage.

The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
Any thoughts out there?

This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
Move the file to the desktop before you open it.
Where is this file stored, a CD or DVD, external hard drive, USB memory ?

How to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

Does somebody know how to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
You need to upgrade your OS X before installing the latest version of iTunes. Then you will be able to sync your 5S.

Where can I download a full version of Firefox that does not require internet access for installation?

I have a computer which needs Firefox but it does not have internet access. Could I download a full stand alone version of Firefox, copy it to a USB memory stick, and install it from there?

Yes, the Firefox download is complete - no need for a internet connection for installation.
http://www.mozilla.com/en-US/firefox/

I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station". All my software is up to date and

I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

I can only get Firefox to start if I restore my system to an earlier date (the previous day for instance). If I just close down Firefox I cannot sart it up agian without a system restore -- yet it does not show as a task which is running after I click ont

Restored machine. Opened Firefox - all is well.
2. Closed Firefox. 3. Clicked on Firefocx shortcut - no Firefox ran. 4 Clicked on Firefox in program list - no Firefox ran.
5. Restored to the previous restore point; clicked on Firefox shortcut - Firefox ran.
== This happened ==
Every time Firefox opened
== a month ago.

Thank you for your help Nattgew.
Boinc is already running in the background as a service. There is no need to run "boinc" on the command line. The error you see is because it is trying to start Boinc again from the command line, but the service is already running and has claimed the port 31416.
I know, it was in order to give all the possible feedback.
I'm not sure why boincmgr won't connect... could you be more specific about what happens when you run it?
No, I can't be more specific than I've already been above. I've described all that I see that happens.
Other than that, the wiki tells you where to look at the log file (make sure there are no errors there) and explains the password for connecting (sounds like you already took care of that, but good to double check).
As you can see I've searched all the errors I got in the boinc wiki. I know what they mean, but not why are happening.
I think my problems come from a bad management of the files permissions by the package installation. I mean, when a package is installed there should be an script or something that modifies (or create the files with) the permissions that files must have, or create the groups that need to be created, and so on. But it looks like I have to modify all this data in order to get boincmngr connect to boinc, boinc and boincmngr get the writting permissions in the installation folder too, etc etc etc. I don't know very well how to do all this stuff (I mean that I've already created by hand the boinc group, changed the execution, access, modification of files with users and boinc groups credentials, and I still get silly errors as "boinc can't write" in a folder which is the owner, or can't write executed by the root. All this stuff messed me up because looks too much stupid), but more important, I shouldn't to do it manually after a package installation.
I should open a bug report in arhlinux first and if they can't solve the problem open it in the boinc support, I suppose.

I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

Similar Messages

Maybe you are looking for