I downloaded an update for iPhoto yesterday. Now, when I try to open iPhoto...I get a gray screen with the "circling" icon in the middle but it doesn't open. All was fine before the download yesterday? Any suggestions, Thanks. Wayne K..
I download a suggested "update" from the App Store for my iPhoto yesterday. Now when I try and open my iPhoto, I get a grey screen with the rotating circle icon in the middle......that just keeps rotating. Ergo, it won't open!!! Before the "download" all was fine in Heaven & Earth....now, I'm a little peeved.
Anyone have a suggestion?
Thanks,
Wayne K.
ps Have a good day, God Bless America ...............and be weary of iPhoto update downloads,very weary.
No need to be wary of iPhoto updates however it is a good idea to follow the instructions when updating. I haven't updated iPhoto from the App Store before however it should not be much different than doing a DVD update. Here are instructions on updating the library:
http://support.apple.com/kb/HT4431
Similar Messages
-
I just did an update for twitter on my iPhone 4 and when I try to open twitter, it just closes. Please help
Thanks,
But I just tried and it still didn't work, any more suggestions? -
When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?
Did you recently install any updates?
Do you have your original install discs?
~Lyssa -
can any1 help me on this ?
Unless this program will get it out of recovery mode (very doubtful)
RecBoot: Easy Way to Put iPhone into Recovery Mode
You will have to restore and thus erase the iPod. Restore from backup if yo have one.
iOS: How to back up -
On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.
You can install Java from here: http://www.java.com/en/<br><br>
You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
See:<br><br>
* http://www.adobe.com/support/security/bulletins/apsb11-12.html<br><br>
* http://www.adobe.com/support/security/bulletins/apsb11-08.html<br><br>
Download from here:<br><br>
* Adobe Flash: http://get.adobe.com/flashplayer/<br><br>
* Adobe Shockwave For Director: http://get.adobe.com/shockwave/<br><br>
* Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO<br><br> -
Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?
Your report indicates Mountain Lion, but your footer indicates Lion. I'll assume you're on 10.8.2; on the current Mountain Lion version.
Rebooting is fine.
The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox. (But I don't know enough about that to be certain.)
Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version. (I'm assuming that site is where you got your Xquartz kit from, too.)
I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz. -
Since upgrading to Yosemite my macbook pro keeps going to sleep if I am not using it. I want it to stay on as I leave it doing things overnight (cd's / recording etc. It was fine before the upgrade and I have all the system preference set to "never turn off" - Help !!!
Good advice from Linc Davis that should sort out your query i think...
However you dont want to set your MBP to never go to sleep...
Adjust reasonable sleep settings...
And the download an APP called caffiene...
When you click it you can have your MBP never go to sleep with a single click of your menu bar... and with another click it can go to sleep normally to maintain the laptop...
Simply click the cup... To toggle never sleep/sleep -
I have been playing 7 Little Words game for months and now when I try to log in it gives a "plug-in" code and tells me to download an updated Adobe Flash Player...I have download it 8 times and still now access to this little game....HELP!
https://discussions.apple.com/docs/DOC-3591
-
After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.
Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy -
When I upgraded to Windows 7 I was told to uninstall iTunes and its helper services. Now when I try to install it I get a message that says "the files I'm trying to install are not native to this program. Is this being blocked by Windows 7 security that I'm not used to. I'm not using the Windows firewall. How do I find what process is doing the blocking. Any ideas would sure help. Rex
I understand where you are coming from. I had the Ultimate Tier at one point, but I didn't watch alot of those channels so I downgraded.
Another problem with changing my tier back up to Ultimate is that I was told I would lose the discounts associated with the package I have now. The discounts won't transfer to the new package and they can't give me an equal amount of discounts with a new package. At least with the Sports Pass, it is an add on like HBO, so you can cancel at anytime with no penalties or changes to your plan.
Verizon does advertise the Sports Pass on its website. Here are the channels. The only ones I would be interested in would be beIN and ESPN Classic, since I will be losing that channel sometime in May since I only have the Extreme tier.
beIN Sports HD
CBS Sports Network
ESPN Buzzer Beater HD
ESPN Goal Line HD
ESPN Classic
HRTV
Longhorn Network (Outside of Texas)
Outdoor Channel SD/HD
Sportsman Channel
TVG
World Fishing Network SD/HD -
When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning. My computer is stuck! Any Suggestions?
Follow all the steps at > Mac OS X: Gray screen appears during startup
-
My ipod touch shut down for no reason. now when i try to turn it on again, it goes to the apple icon to the spinning wheel, then it repeats.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann
Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300 "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300 "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp = "MF Toolbox Ver4.9"
CNCRFN = "MF8300"
CNC.MDL = "Canon MF8300"
CNC.SRS = "Canon MF8300 Series"
CNC.DeviceDesc = "Canon MF8300"
CNC.SPInfo = "Canon MF8300 Scanner"
CNC.TwainDS = "Canon MF8300 Series"
CNC.ColorGear = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName = "WIA Canon MF8300 Series"
greeting
SixtenHow I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone. -
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
I updated my itunes and now when I try to send music to itunes it won't send the music to the folder I sent it to. What do I do this get this to work?
in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN
Maybe you are looking for
-
Multiple iphones, 1 itunes library, 1 account - how to share ratings?
Hi all, My husband and I share one itunes account, one music library and we log into the computer with one account. We have the same music available on our iphones which we rate - than delete the rest (from the library and the computer). Problem come
-
I have a Flat File -> XI -> Flat File scenario in XI 2.0. When I designed my mapping, I ran it in Test mode with the generated XML file in the inbound fileadapter (I retrieved it from the first step payload) and the output looks like I expected. Howe
-
EJB client needs both source and generated jars?
From within JDeveloper, I created a basic EJB with a default package called EJBHello. Here is my directory structure after building and deploying this EJB: h:\EJBHello\EJBHello\EJBHome.java, etc. h:\EJBHello\EJBsource.jar h:\EJBHello\EJBgenerated.jar
-
Cannot tumble some QTVR files w/ QT 7.1 Pro
I have some QTVR files generated from a 3D app that won't tumble anymore w/ QT 7.1 standalone, however they do if I drag the file onto Internet Explorer. Bummer! Here is a small 1Mb example file > http://www.damienf.ch/images/legocarQTVR_small.mov. S
-
How to load file.html in JEditorPane
Hello how to display HTML file including images in JEditorPane the file is on local system thanks