I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4
Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport
Similar Messages
-
I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Flash player stops working after a few days.
I'm recently having issues with flash player on IE and Firefox each time a new version is released. This time the flash player stops working after a few days without any reasons. I have asked two other questions and I have tried the solutions but this time they are not working:
http://forums.adobe.com/message/4617987#4617987
http://forums.adobe.com/message/4548211#4548211
Could anyone tell me what the reason is?
I also need links providing Flash player for IE and Firefox which are always updated. I need to first download the installer then install it offline not install it directly from adobe website.
Please help me solve this once forever!
Message was edited by: sia1989I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header -
I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?
You need to install Office on the computer from the installer DVD or disc image you purchased.
-
I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again
Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours -
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
I have tried to update Java to continue to play games on Pog but update is not successful. Suggestions, please.
Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can. -
Remote control stops working after a few days
NW 6 SP3
ZFD 3.2 SP2
After importing workstations, remote control works fine. After a few
days, remote ping might work but NOT remote control. Sometimes even remote ping errors out with the message that the "REMOTE MANAGEMENT
AGENT
IS NOT RUNNING"(when it appears it is). If I stop and start the
"novell
wuser agent" service, then I can usually remote control the
workstation
again. Occasionally, however, I get the message "The Remote
Management
agent was unable to locate the workstation in NDS". At which point I
have
to delete the workstation object and re-import the workstation to be
able
to remote control it again.
Any help is appreciated.
Jeff> [email protected]
>
> >
> > The login script is running wsreg32.exe with the /s parameter
> > pointing to the server servicing the import services.
>
> Is there a reason you are using this?
> instead of DNS, hosts, or registry?
>
> As I am wondering if maybe at times the workstation manager tries to
> registr, but can't find the server, even the wsreg is running.
> Normally onces the workstation has registered it doesn't need the
> address again, but if for whatever reason cannot find it's
workstation
> object it will need to resolve the import services.
>
> --
> Jared L Jennings, CNE
> Novell Support Forums SysOp.
> http://support.novell.com/forums/faq_nntp.html
>
> Posting with XanaNews Reader 1.15.8.2
> Geek by Nature, NetWare by Choice.
I have a different server for each site(city) hosting the import
services. There is only one variable allowed in DNS so all sites
would
try to get services and register to the same server.
Using the container login script for each site to set the /s parameter
was
easier than changing the registry setting for each
workstation...especially if that server changed. This way I would
only
have to change it one place.
If the workstation has already been registered and imported AND I can
remote control it, does it NEED to find the import server again if it
hasn't been rebooted since the last time I remote controlled it?
Thanks, jg -
Voice Over not working after a few days.
Hi, I really need help on this one.
I have a friend who can't do anything without using Voice Over. We downloaded french voices and everything runned perfect for a few days, then it suddenly stopped working. When starting up the computer, we just hear "Talk deactivated" (in french), then nothing more. But the talk option is still "on" on the Voice Over preference panel.
The other problem is that we used the zoom function and made it following the cursor. Now, it just ignores the mouse's movements.
I don't know what to do.
Many thanks by advance !This is quite a common problem. The usual cause is inadvertent use of the "mute speech" command via the Trackpad Commander.
To toggle VO speech on and off using the Trackpad, tap twice with three fingers simultaneously.
Otherwise, you can summon up the VoiceOver command menu using VO-H-H, type "PAR" (French for "SPEech" and press Return.
For the Zoom problem, open System Preferences —> Universal Access and make sure you tick the "Zoom follows the keyboard focus" checkbox.
You might also want to experiment with the Screen Image radio buttons lower down the window:
• Continuously with pointer (some people find this makes them seasick);
• Only when the pointer reaches an edge (usually preferred); and
• So the pointer is at or near the center of the image (some people like this).
Have you thought of looking at the French language website http://cecimac.org/ ? It's full of articles and tips for beginners, all in French. There is also a very lively e-mail Forum for Francophone VoiceOver users.
Good luck,
Archie -
Printer not working after a few days
Hello i have a printer model: HP LaserJet pro MFP M127fnI installed software and drivers and printer working perfectly well for a couple of days and then stops working. I then have to uninstall and reinstall drivers again and again working only couple of days...Someone please guide what to do.... Thanks
Hi!, guy36: Please see ... http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 IntroductionStep 1Step 2Step 3
-
DVA stops working after a few days
GW 2014 SP HP1
Hi,
every few days I have to restart DVA, because it shows no more "Conversion
Successes" only "Conversion failures":
GroupWise 2014 SP1 Document Viewer Agent
Status | Configuration | Environment | Log Files | Quarantine Files | Help
Up Time: 5 Days 17 Hours 55 Minutes
Total Busy Peak
Worker Processes 15 2 15
Server Information
Platform Name Linux Release 3.0.101-0.47.52-default
High Availability Port 8400
Request Statistics
Total
File Conversion Requests 30248
Conversion Success 19498
Conversion Failure 10733
Worker Abends 1
Exceeded Time Limit 159
WebAccess shows "[38445] A failure occurred in the document conversion
process. The document cannot be viewed at this time. " when trying to view
an attachment.
Another symptom is: DVA Web Console, Log Files shows an empty list of log
files.
After restart of DVA it again works for some days.
Any ideas?
Thanks,
MirkoHi Laura,
I opened a SR.
Thanks,
Mirko
laurabuckley wrote:
>
> Hi Mirko
>
> I am aware of issues on the DVA hanging threads. I'm not sure if this
> is what is happening in your environment. If you open a Service Request
> with Novell Technical Support you will be able to get a newer version of
> GroupWise 2014 that has DVA fixes in it. My suggestion is that you try
> that first.
>
> Let us know how you proceed.
>
> Cheers,
>
> -
Remote stops working after a few days
I've recently run into a problem at one of my sites. Nothing has been
changed on the Netware server, and nothing was changed in ZenWorks,
but I
get a message stating, "The Remote management agent was unable to
locate the
workstation in NDS"
The server is running eDir 85.27c, NW5.1 SP5, with Zenworks 3.2 sp1.
I
checked for NDS synchronization issues, and there are none. The
server has
a replica of the partition, and DSRepair comes up clean.
If I delete the workstation and unregister it, then allow Zen to
re-register
and import the workstation, it will work again, for a few days.
Any help would be greatly appreciated.
FrankDaddyo,
It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated
reply.
Has your problem been resolved? If not, you might try one of the
following options:
- Check the knowledgebase at http://support.novell.com
- Check all of the other support tools and options available at
http://support.novell.com
- You could also try posting your message again. Make sure it is
posted in the correct news group. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept
our apologies and rest assured we will issue a stern reprimand to our
posting bot.
Your Novell Support Connection Forums Team
http://support.novell.com/forums/ -
The Maverick Calendar App-Alert Option-to Open a File-stops working after a few days
The Maverick Calendar App, Alert Option, to Open a File works for a few days, than stops. The Calendar alert still triggers, but the reference to launching the other file disappears. Has anyone found and solved this problem?
This Calendar, Open File Option, worked fine without error in 10.8 and earlier, but I was only given the option to launch an Apple Script.Hi Laura,
I opened a SR.
Thanks,
Mirko
laurabuckley wrote:
>
> Hi Mirko
>
> I am aware of issues on the DVA hanging threads. I'm not sure if this
> is what is happening in your environment. If you open a Service Request
> with Novell Technical Support you will be able to get a newer version of
> GroupWise 2014 that has DVA fixes in it. My suggestion is that you try
> that first.
>
> Let us know how you proceed.
>
> Cheers,
>
> -
I have been trying to restore my ipod touch for several weeks. The ipod is on the usb-itunes screen but the computer will not recognize it. I have tried three different laptops and am now very frustrated. I have also tried several different usb connectors.
Try putting the iPod in DFU Mode vs. Recovery Mode.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Issue in starting Oracle 11g Installation - Display Variable
Hi Experts, I am getting the below error message when I run ./runinstaller "Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed" also, xclock was failed before executing ./runi
-
802.11n Enabler won't install
I have a 2-week old MBP Core 2. When I run the installer I get; You cannot install...on this volume. This volume does not meet the requirements for this update. The installer reports 90.5GB Free on my only HD; the software requires 112KB. Anybody els
-
Where can I get a recipe card template?
The Avery website does not have iMAC templates like the ones I used when I was PC for 4 x 6 recipe cards and Pages does not include such a template.....can you imagine that?
-
I have a G5 XServe running 10.5.7 server. Client Macs can logon OK and access all files/folders, however, if they then access files/folders locally and then go back to server it tries to reconnect and fails. This doesn't happen if the user has Admin
-
Trashing noise when mbp wakes from sleep
oh now i've started posting i keep thinking of new things that don't seem right! for the last few months i have noticed that when i wake my mbp up from sleep, it always makes a few strange noises much the same as when you empty the trash bin as it cr