I downloaded the latest I tunes update today. Now when I click on the itunes icon I get an arror box :R6034 and cannot access my itunes library. How can I fix this problem?
I annot open my Itunes library ever since installing the latest version of Itunes today. I get an error "R6034." How can I fix this problem?
Hello Steven.
First and foremost, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
In any case, and since you seem to be in the process of updating (you should have done so a while ago, since Firefox 2.0 has been discontinued years ago, I believe), your problems may exist because you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Similar Messages
-
I had to reset my username and password on my computer because I must have hit a wrong key when changing password. Anyway I made a new admin user on my pc and now my iphone will not sync all the way with my itunes. I flashes a message on the screen saying "you do not have the proper privileges" and stops the sync. All of my contacts are gone and all of my google calander is wiped clean. I just want my Iphone to sync now so that I can add contacts again. What can I do? Thank you for your time.
rfondrickbogdan0,
Tried that but did not work. Thank you for the reply. However, I did find the correct thing to do though so wanted to share.
Since on my computer I had to create a new admin account, I had to go into the shortcut properties of Itunes. Then hit Compatibility Tab. Had to check Run as Admin.
After hitting Change settings for all users it worked just fine. -
I just installed iTunes 10.5 on my Windows Vista laptop. Now iTunes launches itself about every 60 seconds on my computer. I close the application and 60 seconds later it reopens. Any ideas how to stop this?
Had the same problem (as have a LOT of others).
Took the following action which (knock on wood) seems to have solved it!
Plug in iPhone; when Sync starts, click on "iPhone" under Devices; click on "Summary" page; under Options at the bottom of the page, uncheck "Sync wiyh this iPhone over ..."; click apply; exit after sync is complete......my problem disappeared!
Note: if the box is already unchecked, try checking it; apply; uncheck; apply
Good luck! -
My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html -
Playback of .mov files has dropped frames. How can I fix this problem?
Playback of .mov files has dropped frames. I've exausted changes in settings without result. The files play back from my Canon camera into an HD TV but not on my desktop using Windows XP or my notebook using Vista. How can I fix this problem?
Playback of .mov files has dropped frames. I've exausted changes in settings without result. The files play back from my Canon camera into an HD TV but not on my desktop using Windows XP or my notebook using Vista. How can I fix this problem?
The QT player is programmed to drop frames during playback if needed in an effort to maintain the target frame rate. If you want all frames to be played, the turn on the "Play all frames" viewing option but be advised that the playback frame rate may then vary drastically. -
I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?
http://support.apple.com/kb/TS1538
-
I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?
Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W. -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
Since Adobe Flash ran its latest update on my computer, I have not been able to watch any online videos. How can I fix this problem?
see https://support.mozilla.org/en-US/questions/929196
thank you -
My ipod touch 4th generation is so laggy after the last update how can i fix this problem
how can i fix this problem
- double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.
thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?
-
Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4 -
Sharing to DVD I get the following alert " There was an error burning your disc. Not enough Disk Space in Target Folder" I have 700GB free. Where is this target folder located? How can I fix this problem? This is definitely not a space problem.
Since starting with FCP X, there has been tons of issues, now that the product actually works with the exception above, makes it impossible to share the production. Has Apple fixed this problem. is there a knowledge base article on this?
On another note, One reason I have not purchased support on FCP X is because you sold a product that never worked for almost an entire year or more. Now I can finally finish my project, I cannot share it.....Really. This has to be fixed now, I am loosing money as I typed this.
Regards,
Rob HarrisJust curious, why would repairing permissions, rebooting ( rebooted 2 times already today) or creating a new user possibly fix this.
I cannot create a new user, that is way too much work. I will repair permissions again, I repaired permissions just a few days ago. Then I will reboot, login and turn off App Nap and rerun the Share DVD.
There must be something seriously wrong with the OS if your are suggesting creating another user. WOW!
Rob H. -
Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.
It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.
-
I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?
The iPod sees the new computer as a new iTunes library. You can only sync with one iTunes library. However, you can manage music among disfferent computers. See:
Using iPhone, iPad, or iPod with multiple computers
Maybe you are looking for
-
Perform a clean install from recovery disks
Hi all, I have the model (L505-S5995). I created the recovery disks (3 dvds in total 2 for system and 1 for software). The question is: If I use these disks it will reinstall the Operating system (Windows 7 Home Premium) along with toshiba bundled so
-
My boss wants to show to our stake holders that SSRS is a better solution for BI reports than a javascript based charting solution (Kendo UI). He has asked to provide him with information to help him prove his case, however, I have very little experi
-
How to configure gauge and slider with VC
Hi All I have a iview in the VC Model and in the iview I have a query which generates Inventory Qty. I put a form in this iview and put a gauge on ithe form. I connected the query inv qty to the form but I cannot set the gauge to display the inv qty.
-
New to CS 6....how can I create a default "print document" letter-size artboard ?
-
Strange message while booting up.
I get this message while booting and am wondering if anyone knows how to correct the problem. Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. I haven't found any solutions or much explanation of what it is using goo