I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

Similar Messages

  • I cannot get on to firefox. the message is "Procedure entry point sqlite3_stmt_readonly could not be located in the dynamic link library mozqlite3 dll. what can I do

    I CANNOT GET ON THE INTERNET.

    You will need to Reinstall Firefox because your previous Installation did not end properly or it got Corrupted.
    -> [[Uninstalling Firefox]] - Uninstall your current Firefox
    * DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
    * Restart your system
    -> Download latest Firefox version from one of these links using some other Web Browser:
    * http://www.mozilla.com/en-US/firefox/new/
    * http://www.mozilla.com/en-US/firefox/central/
    * http://www.mozilla.com/en-US/firefox/fx/
    * http://www.mozilla.com/en-US/firefox/all.html
    -> [[Installing Firefox]]
    Check and tell if its working.

  • Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

    Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
    re-install Itunes and what version??

    Refer to this thread - https://discussions.apple.com/message/15685210#15685210
    Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

  • HT1926 I am getting this message when loading Itunes after updating to the latest upgrade..The procedure entry point uloc_getLocaleforLCID_4_0 could not be located in the dynamic link library icuuc40.dll (i have windows 7)

    I have windows 7 and after updating Itunes to the latest version, I get this error message...
    The procedure entry point uloc_getLocateeForLCID_4_0 could not be located in the dynamic link library icuuc40.dll.
    I have tried repairing and reinstalling even deledted Itunes and did a re-install but keep getting the same error message.
    what can I do to fix this error?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I have installed itunes 11.4 to windows vista and now I have an error; The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.  What do i do to syn my phone

    My problem is after installing itunes 11.4 this is now a problem
    The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
    is the first ERROR and
    some error 127 reinstall
    can you please tell me how to fix it?
    Im running Windows Vista
    All I want to do is back up my iphone 4s, so i can add my iphone 6 Very Fustrated

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

    Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I updated iTunes today (Windows).  When I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".

    I updated iTunes today (Windows).  I restarted the computer but when I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".
    I then did a new install of the latest iTunes version and got the same problem.   No more iTunes.
    HELP!!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll.

    I'd download the latest ITunes and I started it and it has this error message:
    "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll"
    I reinstalled ITunes several times and it got the same message. Please help.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    I've not seen this message before, but it has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find iTunes.dll in the iTunes folder in Program Files or Program Files (x86). Delete it and then repair iTunes from the control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

    Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
    At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
    Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
    Tried downloading iTunes and updating manually - get exactly the same result.
    No problem using iTunes before this.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • HT203175 Why won't iTunes install properly? It gives the start up error "The procedure entry point JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll"

    I can't get iTunes to install/start on my HP laptop. When I start/install the current version, I get the following error "The procedure entry point "JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll". Why isn't this dll included in the distribution? What do I do to get iTunes to install on my 64-bit AMD HP laptop.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • V6 locks up 1m at a time when browsing all week, now it won't load at all: (procedure entry point sqlite_libversion_number_IP could not be located in the dynamic link library mozqlite3.dll.

    When you try to load Firefox 6.0 the following error message is thrown and browser will not load:
    The procedure entry point sqlite_libversion_number_IP could not be located in the dynamic link library mozqlite3.dll.

    "The procedure entry point QTCF_CRUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link libray QTCF.dll."
    That one is usually caused by a misplaced older version of QTCF.dll.
    If you've got a 32-bit vista, first look to see if there's a copy of QTCF.dll lurking in your C:\Windows\system32\ folder. If you find one there, drag it out onto the desktop.
    If you've got a 64-bit vista, first look to see if there's a copy of QTCF.dll lurking in your C:\Windows\sysWOW64\ folder. If you find one there, drag it out onto the desktop.
    Now try launching iTunes again. Does it launch properly this time?

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • My problem is on my Windows PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help?

    I use both a Mac and a PC.  My problem is on my Windows 7 PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help out there?  Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

Maybe you are looking for

  • Cleared/Open Item Symbol not Green for Cleared Items

    F.13 process for clearing GR/IR matched items runs to tag documents as cleared. For some reason the Cleared/Open Item Indicator is still showing the status as "Red" for the items which are actually cleared, means the items are shown as "Open" while s

  • Why is my Macbook Pro running so slowly/Pinwheeling all the time in maverick?

    In Firefox, Mail, Pages, everywhere!  My hard drive is about 1/3 full, I'm not running anything except Firefox, mail, pages,  & quicken.  I did a disk repair (there were problems) but now they're fixed and it's not any better.  Ideas please?

  • HR triggers not being triggered

    Hello Experts, I have configured a triggers for new hire  and have performed the following steps 1.Performed HR field mapping 2.created Action 3.Defined a rule with  necessary attributes 4.Scheduled background jobs ( both data laod and HR trigger job

  • Numerous Norton anti-virus error messages appear whenever I start my iMac.

    Whenever I restart my new iMac I get approximately 10 NORTON AntiVirus Error messages which state: "Norton virus Auto-Protect could not continue. Please run Live Update or reinstall Norton Antivirus and Restart (Code: 10)." I've tried all these thing

  • Capture HDV as mp3 & can't import projects!

    First of all a hi to all here I was working with Premiere CS6 before but my HD broke down and decided not to use the image backup but to do a new and fresh install on a new 2TB HDisk Working with Windows 7 64 I have all my projects folders with the f