I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?
I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?
You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.
Similar Messages
-
I have tried holding the home and sleep button for 20 seconds but still nothing happened.I have had this phone for 1 year and 10 months and I have never had any problems like this. Please Help!
it likely need repair
first you can try to connect it to AC though and try the home + powerbutton again -
My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.
Hi Lauren,
When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M. -
I have forgotten my password to unlock my screen, after several attempts my IPAD is now disabled, does anyone know how I can fix this?
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
i was downloading bioshock off the app store and was 5.2 gb out of 7gb through when my internet disconnected and now it has "an error has occurred how can i fix this
i have tryd a few different ways that people have fix this kind of problem but nothing has worked for me yetokay i got bioshock to download but when i went to download another game it comes up with this how can i fix this, please help
-
I downloaded iTunes on my new computer, but when I try to download my already purchased songs a message pops up saying, "Your computer is not authorized." How can I fix this?
Launch iTunes and click on the click on the store menu item the select authorized this computer.
-
My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?
You might need to clean the headphone port (I was in the same situation and this worked for me). Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in. After cleaning the issue was resolved.
-
Everytime that I sign on FaceTime on my macbook pro, it says "the server encountered an error processing registration. Please try again later". How can I fix this so that I can use facetime again
Not a solution, but was able to login at work. Then when I got back to the hotel all was fine and it works now. Just will not change IDs I guess.
-
my midi performances are being recorded at a velocity of 98 no matter how I play it.
What's happening, how can I fix this? Thanks!
Frankmy midi performances are being recorded at a velocity of 98
Do you use "Caps Lock" cause your description reminds me of its default velocity setting?
If yes, keep in mind that your computer keys are note velocity sensitive! There are a few keys in the "Caps Lock" which can be used to set the velocity output to some fixed dynamic values like "pp", "mf", "FF". Another scenario is to patch a Transformer between the Logic Physical Input & the Sequencer and set the Transformer to randomize the velocities, but it is not the same like using an external midi hardware controller which is velocity sensitive.
A.G
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc. -
Hi i have a iPod 5th gen it ran out of charge so as you would i put it on charge however after 25 mins i went over to see it and it wont turn on what so ever. I have held in the lock button and theres no sign of it turning on. Can anyone help? Thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was trying to buy an app from the apple store, it asked for confirmation , when I re-entered my credit card details, got the message that your payment method is not valid!!!! How can I fix this problem?
Is this a pre-paid card thing? Or different billing address than your iTS account?
-
my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.
Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem. -
My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"
I have done this and no difference
I have just realised what has caused the problem.
Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok -
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device
Maybe you are looking for
-
guys, I'm a new iphone user and I'm having trouble in dowloading apps to my iphone 5, also by PC and my own telephone. i got the apps icons but it is written "waiting..." for more than 24h. I've also turned it off and conected again on internet but i
-
QM Module - How to get the Inspection Method & Characteristic value(Urgent)
Hi All, I have inspection lot number (PRUEFLOS), batch number (CHARGE), plant (WERK) & material number (MATNR) , using these fields how to get the inspection method (PMETHODE) & Characteristic Value (ATWRT) ? I dont know the relatio
-
Monitoring pl/sql execution from Enterprise Manager
I need to implement monitoring of PL/SQL code from within Oracle Enterprise Manger 10g. OEM has Custom user defined metrics (UDM) that allow one to issue queries against a database and decide whether the output from the query is a warning or a critic
-
Problem in getting Page nos in SFs
I have a problem in getting Page nos in SFs. My problem is that, I want to print multiple docs ie SELECT-OPTION case. Here each doc has N no of pages. I want to print Page 1 of N for each doc. I used SFSY-PAGE / SFSY-FORMPAGES but its giving total no
-
What is Your Kernel Size?
Today I decided to compile my kernel and remove everything I wouldn't need Kernel 2.6.25.4 -Size: 2.285 MB -Modules: 1.2 MB Total: 3.485 MB Features: -ACPI -Button -Fan -Processor -Suspend to Ram -Frame Buffer w/ Tux logo -NVIDIA/AMD Sata -I