I dropped my ipod in water now it won't work help

I dropped my ipod in water and now it says its needs to be plugged in to itunes but when it is it says its still not and it won't respond what do i do

If you did this recently put it in rice to absorb the water. Uhm if not, try to take it to an Apple store and give them a sob story ahha, maybe they'll give you a break. Good luck (:

Similar Messages

  • I updated my iPod to iOS6 now it won't work in my car...HELP!?!?

    I did the latest update, everything seemed fine, then went and plugged connected it to my car (2012 Maxima) hit play tried to move to the next song and all of a sudden it didn't work. Then I plugged in an iPod that wasn't updated and it worked just fine. HELP!?!?

    You can try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    However, sometimes an iOS update breakes compatibility with car systems. I would also contact the car manufacturer.

  • I dropped my iPod Touch and now it won't come on without it being connected to a charger but it won't charge either...

    So I was in the bathroom, cleaning my iPod case, and I accidentally dropped my unprotected iPod Touch from about two or three feet up.
    I picked it up and tried to turn it on, but it would not work.
    I freaked out and went to my charger in my room and connected my iPod to it, and soon the Apple logo came on and it turned on.
    I was relieved, but the time was set to the wrong time, so I set the time to the right one, and took the charger out.
    As soon as I pulled the connecting cable thing out, my ipod went black and wouldn't turn on again.
    It's not charging either, as the symbol on the battery up in the upper right corner doesn't have the lightning symbol, but the symbol that looks like the part of something that uses electricity that you plug into the concent (or whatever that is called)
    And when I connect it to the computer, the apple logo comes on, then goes black, then comes on and keeps on doing that, and it will not show on iTunes.
    I have tried pressing the home and off buttons for 10 seconds to reset it, and turned it on and off... but my iPod just will not charge OR turn on without being connected to the charger.
    Are there any more things I could try, or will I have to go to Apple and get it fixed??

    I would not waste any more time.  If a reset did not fix it, and given what you describe, it sure sounds like a hardware issue.
    The bad news is that accidental damage is not covered under warranty, so you may have to pay for an out of warranty exchange.
    Do you have a recent backup to restore from if you end up with a refurbished exchange unit?  If not, ask the Apple folks to try and recover and transfer what is on there now at least, before you surrender the damaged one to them.

  • Dropped iphone4 in water and now camera won't work. help?

    i dropped my iphone4 in the sink and it wouldn't work for three days. magically it turned on last night after i plugged it in the charger (i know your not supposed to do that but obviously it worked) but anyways everything is working exactly as it should except my camera is completely messed up. if i press the app for my camera it wont even open the camera at all. so what do i do? i know the apple protection plan does not cover water damage but my phone is working just not the camera. would that be covered? i just need some answers before i call my phone company tomorow

    Accidental damage is not covered under the warranty in any shape, form, or fashion.
    Having the iPhone powered on and trying to make it work while there is any internal moisture is what causes damage.

  • My husband dropped his phone in water now it won't turn but when you switch the lock button the side it vibrates and we have been charging it and it's getting warm?? is there any way to retreive the information on without turning it on? Is their a memory

    I really need help with this question. Can someone please shed some light on this subject.

    Let it dry thoroughly in a very dry environment for a couple of days and then try to charge it for more than 15 minutes.  Then try to power it on again.  I did the same and after two days my phone turned on and although I could not make calls or use data, and the screen was erratic, I was able to connect to iTunes with my Mac and do a backup of both contacts and stuff like photos, settings, etc.   afterwards I was able to restore my new iPhone from the backup and I got almost everything back including notes.

  • My iOS used to update before I reset my ipod 3g, but now it won't. Help?

    Before I had reset my iPod completely, it was working perfectly with the IOS updating well, but after I rest it, it went back to the lowest iOS possible, and it will not let me update again since there is no sign that I should update. And now I can't download anything because everything is iOS 4.3 or higher. And I'm selling this iPod soon, to a friend and I really don't want it to not let her download music from her iTunes account like it did to me, and I also want it to actually update when I reset it again for her.
    What's wrong with it? And I cant go to a Apple Store and get it troubleshooted since I don't have enough money.
    It also will not let me download any music onto it.

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

  • I updated my ipod touch and now it won't work but itunes says everything is fine. What should I do?

    I was updating my itouch that I got in September to the IOS 5 and everything went fine until the end of the update when it was creating a new back-up of the information on the itouch. When I saw that it didn't work and it told me to restore the previous bakc-up I tried that, but nothing happened. Itunes was doing a lot of work but my ipod touch didn't show that anything was happening. My ipod touch wants me to go back through the set up and when it gets to the part where you can restore a previous back-up I tell it to do that. The problem then is that it tells you to connect it to itunes and I do but the itouch doesn't seem to realize that it is plugged into itunes. Then I try to restore the old back-up form itunes and it immeadiately pops up saying htat it can't because of error: ipod (-50).

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • Dropped IPOD in water now what?

    Accidently dropped ipod in water now what do i need to do?

    Place the iPod in a sealed container of uncooked rice for a week and change the rice daily. The see if it works. If not Apple will exchange your iPod for a refurbished one for this price:
      Apple - Support - iPod - Repair pricing
    Do not use or charge until dry.

  • Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I dropped my ipod touch and now it wont charge

    I dropped my ipod touch and now it wont charge. When I plug it in to charge it just keeps going off and on.

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • I Drop My Ipod Alot And Now It Wont Charge It Wont Show My Notifications Even Doe They Are On My Home Button Wont Work Just A few Times But Thats It.and when on my vine i doesnt let me hear my vines idk why

    PLEASEE HELP I Drop My Ipod Alot And Now It Wont Charge It Wont Show My Notifications Even Doe They Are On My Home Button Wont Work Just A few Times But Thats It.and when on my vine i doesnt let me hear my vines idk why

    You broke it, you will need to get it serviced or replaced. The drop voided your warranty so you would have to do an out-of-warranty replacement with Apple.
    Please don't type in headline style, i.e. capitalizing every word.

  • Okay well i dropped my ipod in water saturday night and i was wondering if apple would be able to give me a replacement on my ipod4g

    okay well i dropped my ipod in water on saturday and was wondering if apple would be able to give a replacement?

    The Apple warranty does not cover accidental damage.  The ipod has a liquid contact indicator installed in it, so they will know that your device was "dunked".  So, you will have to pay the repair price to have it replaced.  The following link should give you the amount you will need to pay for your model of ipod.
    http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • If i dropped my ipod in water would it still work???

    if i dropped my ipod in water would it still work ????????

    There are a couple of solutions to that. Most involve silica gel. Silica can be found in little packets at shoe stores and such, it absorbs water and moisture. If you set your iTouch in a bowl of it, and let it sit for 3 days, you may get it back to working.

  • I dropped my ipod touch and now it will only charge to 20%. It does turn on and the screen I get shows me a picture of a usb cord and a cd with a music note on it that says itunes under it. What does this mean?

    I dropped my ipod touch and now it will only charge to 20%. It does turn on and the screen I get shows me a picture of a USB cord and a cd with a music note on it that says itunes under it. What does this mean?

    connect it to your computer and open iTunes

  • I dropped my ipod in water ... the backlight will come on when the battery is dead and i plug it in .. but when it is on the home screen it won't come on

    i dropped my ipod in water ... the backlight will come on when the battery is dead and i plug it in .. but when it is on the home screen it won't come on

    After drying the iPod in a sealed container od uncooked rice for a week with changing the rice daily, try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem likely caused by the water.

Maybe you are looking for

  • Some Sales invoice is not cleared

    Hi Gurus While we tried to clear the sales invoice (release to account) in T-code VFX3 we are facing the below error, any one can help me. 2288161 Account 2991000 requires an assignment to a CO object Regards, Pavi

  • Table for function code of System Commands

    Hi All, I would like to know the name of the table which stores function codes (fcode) for System Commands (which that are used after abap syntax 'user-command' ). Like table T100 is for messages and ICON is for icons, similarly, the table name for f

  • Why does photoshop elements 12 freeze when trying to save an image for the web?

    Everytime I try to save an animated GIF image for the web the whole application freezes and I have to force quit.  The file sizes are small.  Can someone help me with this issue? 

  • JSF based applications cause X connection to localhost:10.0 broken

    Hi My weblogic 10.3 (and 11g) servers seems to go down when i run jsf based applications. The message in the stdout logs are: INFO: Added Library from: zip:/...richfaces-ui-3.2.2.GA.jar!/META-INF/richfaces.taglib.xml X connection to localhost:10.0 br

  • Trying to check mail via Safari Browser

    I am borrowing an iPad (first edition) and I am trying to check my IMAP mail in Safari so I don't have to set up another email account on my friend's iPad. I put the address in Safari ( the same address I use to check my mail in Safari on my MacBookP