I find information about the performance of the ATG scenario engine.

Hi all,
It is a big point that I can release a business user directly by using a scenario of the ATG.
It is the strongest that I can use the information that tracked a site for the element of the scenario.
I almost collect the tracking information of the site for the site business in Japan.
However, it is the present conditions to use only the analysis of the count level.
I want to reclaim the world of totally new digital marketing in Japan.
It is necessary to release many scenarios to realize 'one to one marketing '.
However, such as the performance there is a question.
At first do you know the example that you use a scenario positively, and realizes an offer and recommend?
In addition, do you know which part of the sizing is important when you come true?
Regards,
hirofumi

ATG scenario engine is one of the feature that ATG provides for a personalised user experience, but the major limitation of scenario is it is event driven, you need to design your ecommerce application in such a way that you have to identify the possible events anddecide on appropriate actions. This will help in very few scenarios but a larger ecommerce application concerns it is very limited.
--At first do you know the example that you use a scenario positively, and realizes an offer and recommend?
This will be very difficult to achieve using a scenario, you can display some basic promotions to the customer but not a real recommendation. First to remember that scenario is not a recommendation engine.
Also this will not useful in case of anonymous customer since tracking anonymous customer behaviour is extremely difficult without a proper recommendation engine. either you have to custom build or go with a third party recommendation engine.
Cheers
R

Similar Messages

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Where could i find information about the state of my request to change my ipod nano 1st gen?

    my ipod 1st gen is part of the program of replacement, but i dont know where i can find information about the state of my request. some ideas?   

    You can enter the Serial Number and Repair ID on this page to get a stsus update:
    https://selfsolve.apple.com/repairstatus/main.do;jsessionid=0phLTksW2mwLbyQVF3Qs zFtCQMH2Jv5xkMxvMlD6RsKVLhpJjpjj!846893301
    Hope that helps!

  • Where do I find information about the status of my ituens account?

    I am using windows 8, not Windows XP.
    Where is the status page for my itunes account?

    Click the Apple menu, then About This Mac, then System Report, and then Storage on the left. This will tell you the model of hard drive and how much capacity / free space it has.
    Matt

  • When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    Have you done a Disk Repair and a Disk Permissions Repair?
    If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. 

  • If I want to retrieve more information about the cookies being stored, such as when the cookie was accessed/created/modified; how can I find this information?

    I would like to have more information about the cookies being stored on my computer via firefox- such as last date accessed/created/modified; how can I add these options to cookie storage?

    Maybe this extension will do that:
    *Cookies Manager+: https://addons.mozilla.org/firefox/addon/cookies-manager-plus/

  • Require information about the Role of Data Analyst

    Hi All,
    I know this might be irrelevent question in this forum, but after a long search, I could not find any suitable place where I can get the information about the role of Data Analyst ( DA ). What all activities the DA needs to perform? Can anyone suggest me anything related to this?
    Thanks in advance
    Himanshu

    As with just about any role, it really depends on the organization. There are dozens if not hundreds of jobs that different organizations might label "Data Analyst." A lot of what a statistician, an economist, or an actuary does would count as data analysis. So would a lot of what a business analyst does. So would a lot of what an software architect does.
    Justin

  • Make information about the current user available in a managed bean

    I've overridden prepareSession in an Application Module (AM) so that when a user logs into my application, it immediately uses the username as a bind variable to execute the query for a View Object (VO) that gets more information about the user, like full name, e-mail address ... This works fine and I'm able to bind the VO to a page and display the information.
    But now I'm beginning to realize that I'm going to need this information about the user throughout the application. Do I have to include an iterator for the user info VO and associated attributeValues on every single pageDef, or is it possible to write a single managed bean that will expose the attributes of the single row of the VO as properties. The application I'm working on now is a "minor" upgrade of a JDeveloper 10.1.3 application, so I need a 10.1.3 solution, but I have a 11.1.2 application in the works that will probably do the same thing.
    Oh, and sorry if this is an FAQ - I'm probably not using good search terms to find solutions that have already been posted.

    Thank you Nick -
    Your code didn't give me exactly the answer I needed, but it pointed me in the right direction. For one thing, I had a version of ADFUtils that didn't have the getApplicationModuleForDataControl method. However I was able to do a Google search and find working code for the missing method. And since the values I need to expose in the managed bean are from the VO, not the AM, I had to go one step further and get a reference to the VO from the AM, and then a reference to the first (and only) row of the VO.
    For anyone else with this question, here's my version of the code:
    public class UserInfo implements Serializable {
        private String eMail;
        private String stateCode;
        private String fullName;
        public UserInfo() {
            AppModuleImpl appModule =
                (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
            ContactInfoViewImpl contactInfoVO =
                (ContactInfoViewImpl)appModule.getContactInfoView1();
            contactInfoVO.reset();
            ContactInfoViewRow contactInfo =
                (ContactInfoViewRow)contactInfoVO.first();
            stateCode = contactInfo.getConStCode();
            System.out.println("At construct UserInfo stateCode=" + stateCode);
            eMail = contactInfo.getConInternetAddr();
            System.out.println("At construct UserInfo eMail=" + eMail);
            fullName =
                    contactInfo.getConFname() + " " + (contactInfo.getConMi() != null ?
                                                       contactInfo.getConMi() +
                                                       " " : "") +
                    contactInfo.getConLname();
            System.out.println("At construct UserInfo fullName=" + fullName);
        public String getStateCode() {
            return stateCode;
        public String getEMail() {
            return eMail;
        public String getFullName() {
            return fullName;
    }

  • ERROR:  cannot find information from the FND_FORM_FUNCTIONS table

    Hi,
    I am in CU2, i have created my project, set the right responsibility in Project property panel of my Jdeveveoper.
    When i run the first page all is ok, but if i click on a h-grid link , i receive the following error:
    "Your system has not been properly set up. The system cannot find information from the FND_FORM_FUNCTIONS table which is needed for this process. Please consult your System Administrator for further assistance."
    This happens only if i launch the custom from jdeveloper. On the Applications, the custom works fine.
    Any idea about the error?
    Thanks in advance,
    Carlo

    Please check the calling logic which is written to invoke the custom form from the existing form.

  • Search Bookmarks gives NO information about the FOLDER in which the bookmark is contained!!

    A sub folder containing Bookmarks has disappeared. The Search facility finds the individual Bookmarks ... however it gives NO information about the FOLDER in which the bookmarks are contained!! How can I retrieve the lost folder when the Search facility gives NO information about folders? The folder information MUST be part of the Search result, otherwise the Search itself is useless in most cases!

    @TXGuy: Many thanks, that was a very helpful addon, and neatly solves my problem!
    Also, I found out that the [https://addons.mozilla.org/en-US/firefox/addon/7377/ Go parent folder addon] solves the same problem, although the one you pointed to does it even better.

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

    I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

    According to:
    http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
    It has DVI ports.  This means you are best to use an adapter that supports DVI.  Note there is no audio that carries over DVI.  What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

  • I contacted Apple support.UK on 22nd December 2011-12-23. I informed about  the problem was likely to be with the apparatur.However  I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

    Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and  Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G:  Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad  from America.
    I’ve recently bought Philips DC390 from  Apple Store in Oxford Street. Althouh Philips dock 1 seemed  to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
    I sended e-mailed to Philips.uk for assistance. They recomend met o reset my  ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
    In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about  the problem was likely to be with the apparatur.However  I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
    I would be grateful if you could make me some recommendations to sort out the refered my problem.

    Hi Nazim
    This is a user to user group.  There is no-one from Apple here.
    Use this link to contact Apple directly.

  • How to find out about the SMTP Server

    Hi,
    I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
    Thank you and regards,
    Katharina

    Hi Katharina,
    you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
    Kind regards,
    dominik

  • On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

    On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

    You can reduce the size to normal, which is about 1GB, by restoring the phone.
    Backing Up, updating, and restoring your iPhone and iPod touch software
    The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

Maybe you are looking for