I fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
turnbui wrote:
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
Pete
Similar Messages
-
My Ipad was downloading the new IOS6 across WiFi and it froze half way through the process. The progress bar has been stuck at 50% for 2 hours now I cant turn it off or reset it any ideas
It solved the problem with my iPod. Had the same issue as above since yesterday. Thought my iPod broke.
This helps. I've got back my iPod. So happy................... -
error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?
Yes, I'm getting the same issue
-
i'm running Win 7 64 bit. since upgrading to newer versions of itunes,the display is wrong. window controls and side scroll bar are cut off. any help will be appreciated. I've set itunes compatibility setting to Win 7.
Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP -
I have taken my 750GB HD out of my 17" MacBook Pro and put it into a 2.5" USB to SATA enclosure but can't get it to open up on my new 11" MacBook Air. Any ideas please.
Have you installed the recent update?
There are some issues with Apple USB 3.0 ports and some devices. -
I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hello in trying to restore from backup to my new phone I'm receiving a 'restore failed' message which I can't get rid off to start again. Any ideas please?
Hi there HotFerrari,
It sounds like you are unable to restore your device from a backup you have in iTunes. I recommend the troubleshooting from the article named:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?
Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!
-
I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.
Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera? -
I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I get the error "missing or invalid personalization information" This used to run, I'm now on Windows 7 64 bit. Anyone have any ideas please? Thanks.
Hi,
If my memory serves me right (it’s some while since I changed and I have not used Photoshop for some years…) I was running it on XP. I upgraded to Win 7 on a new machine but ported across files, programmes etc. I cannot recall if Photoshop ever ran on Win 7.
I have tried to reinstall but the CD is warped and despite applying pressure to it neither of my drives likes it. I have Photoshop 7 on my third hard drive, a portable drive, which came from the XP machine.
Sorry, long-winded but I hope it helps. -
I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.
What happens when you try to change them?
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
HELP! I had iPhoto on my mac, for some reason it was not responding or damaged. down loaded a new version but can't find my photos. any ideas please. I thought once on the mac always on the mac.
Sorry but we need details to help
What version of the OS do you have? What has changed since iPhtoo worked?
What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
look in your applications folder - is there an Iphoto application there? If so get info and report the version
Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
what else can you tell us that might help us assist you?
LN -
I have downloaded the latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?
Can we assume you are bringing up the "Control Center" and the Airplay icon is not there?
http://www.apple.com/ios/whats-new/
Do you have the "AirDrop" icon? -
My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature or on the website that identifies the charging slot but the plug seems to fit! But it won't charge.
Ther does seem to be quite a lot of comments about this issue
It seems the charger is a little slow and takes upto 4 hours to charge
closing all apps and leave the ipod in standby seems to off the best charging experience
I hope the Photo helps
In my view apple should have included a better charger for the price, the new 12w adaptor will reduce the charge time and resolve you problem, however its about $15
http://store.apple.com/uk/product/MD836B/A/apple-12w-usb-power-adapter?fnode=3c# overview
Maybe you are looking for
-
Hi, I am buying a new iMac and want to hook up my old PowerMac G4 (OS 10.3) so that the iMac sees it as a separate hard drive and I am able to access programs and files from the G4. I am still working on a project on my G4, using Adobe CS2, and would
-
Mac Mini ethernet read / write speeds different
Hello. I have a 2.3 GHz Intel Core i5 Mac Mini running OS X Version 10.8.4. I recently bought a Synology ds212j NAS, and started to transfer some files across my home LAN. Everything was running fine until I noticed that the transfer had started to g
-
I download jre1.3.1_19 from http://java.sun.com. I install it on my PC with default location I checked folder C:\Program Files\JavaSoft\JRE\1.3.1_04\lib\ext do not exist any lib My application can not launch. When I install jre1.4.2_12, check folder
-
I have a table that stores time slots. 1. One field is called available_time (and is a number field and need to be converted to hours/minutes). 2. There are 2 other date/time fields as well - these being start_time and end_time. Here is where I am ha
-
Iphone 4 bluetooth - poor audio quality
I received complaints DAILY from friends and colleagues that my voice sounds muffled (or under water or that they simply can not understand me) when speaking to them with my bluetooth handsfree speaker kit in my car. This is very frustrating because