I forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes

i forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes.it keeps saying cannot load sync services. i have reinstalled the latest itunes
please help

but its nothing there, no music, no apps nothing. i had upgraded to iitunes 11 and went back to 10.7 that is when i lost them. apparenty i havent lost contacts, photos.
but i have backed them up previously. i was using ibackupbot and i can see them all there, but i cant install them back to my phone nor to itunes.

Similar Messages

  • HT201303 Forgot my passcode for restrictions on my iPad

    Forgot my passcode for restrictions on my iPad

    Welcome to the Apple community.
    Unfortunately, there is no workaround to your problems. You would need to restore your iPad in order to once again have full functionality.

  • I bought songs on itunes through my iphone. When I went to plug my iphone into my computer to sync, itunes asked me to restore. I backed my phone up, but now i cannot find the songs i purchased through my phone. How do i get back the songs?

    I bought songs on itunes through my iphone not too long ago. When I went to plug my iphone into my computer to sync, itunes asked me to restore my phone. I backed my phone up, but now i cannot find the songs i purchased through my phone. I've looked for the songs in the itunes store, but it said that i had not purchased any of the songs.How do i get back the songs?

    There is a backup plan after doing the Restore.  Read this.

  • I forgot my passcode for restrictions how do I recover it?

    I have tried restoring my phone but it keeps that pass code on it

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I created a new library for my girlfriend using the "hold shift while launching" method but now i cannot find my library. How can i retreive it?

    I tryed to create a new library to use one computer with my nano and my girlfriends iphone 4. for some reason when i did this i can no longer find all of my stuff. all I want to do now is start over and create a new user profile for her and get my library back.

    Does the original library file still exist on the computer?  Hopefully when creating the new library it was done in a seperate folder as I do not believe iTunes allows for two library files in the same location.

  • TS1702 i had purchased whatsapp for my iphone3g and was using until last 24hrs but as sugessted i deleted the app and tried to redownload but  now the msg says "update required this app requires ios 4.3"

    i had purchased whats app approx 18 months back and was using the same until the last 24 hours on my iphone 3g  as per the instructions i deleted the app
    and tried to re- download the app now I get a msg saying that i have to upgrade to 4.3 version and that my iphone 3g is not compatible whereas i was using the same
    till 29 nov.2012. Is there any other version of whatsapp for my iphone 3g,PLEASE HELP ME

    you could alays just update your software.
    http://support.apple.com/kb/HT1414

  • My old Galaxy 111 would read out my texts and who is calling but now my Galaxy Note 4 wont wondering whats up?

    my galaxy would read out text and who is calling but my new Note 4 wont

        No worries, DaveK3131. You can enjoy the readout function on your Note 4 as well! Go into Settings > Language and Input > Read Notifications Aloud to manage your preferences.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • I had to restore my computer to the original restore point. Windows XP backed up my files but now I cannot find my bookmarks file after I downloaded Firefox.

    I had a corrupt config.sys file and had to restore my laptop to original Windows XP restore. It backed up my documents and files, but I lost all my .exe's. I downloaded a new version of Firefox and now can't find my bookmarks. I haven't saved a backup for awhile, but all of my other files are there. Where can I find my bookmarks?

    Firefox stores the bookmarks and the history in the places.sqlite file.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

  • I can't gt out of my att mail!  I managed to set up the mail, but now I cannot exit!  what do I do to exit att

    How do I get out of my att mail?  I managed to set up the mail and checked a few messages, but now I can't get back to the main screen!  Thanks. 

    Press the Home button.

  • I got an app for free through AppGratis a while back and recently deleted it, but now I want to re-download it. However, it's not in my "Purchased" section on my iPod anymore. How can I get it back?

    As the title says, I can't fing the app anymore. It's called TubeBox. It still exists, but now I have to re-buy it if I want it back. So, if anyone could help me out, that'd be nice.

    Contact Appgratis

  • HT4500 I downloaded my hard drive contents from a hard drive Holder to my lap top. I have all of those files but now I cannot find the original pictures and such from the computer before the trasnfer. Hoe do I get them back without losing what I just tran

    I down loaded my entire contents of my desk top hard drive to my lap top. Now I don't know where my original files and pictures are. How do I find them or down load just what I am missing with out losing what I just installed ?

    Hi Again, Well I found Carbon Copy Clone on my old hard drive so I didn't even need to download it. I just dragged it onto my desktop and I did as you said.  Using CCC and within the folder of users which has my folder of old hard drive there now shows a file called.autodiskmounted (whatever that means) and then it has a version of my hard drive below that called hard drive 1, which has nothing, but above both of these folders, there is a folder with an old user name which shows up empty on the hard drive when I search it, but actually shows lots of folders on the CCC. So without getting too excited, it lists some folders and amongst them are folders I cant see normally in the old hard drive, like my safari settings and favourites, and movies music and pictures. However in the movies pictures and music folders I can only see a  blackish square that looks a bit like a blank screen with the text.localised after it .
    Does this mean anything to you / Is there  apossibility they may be there? When I selected my new laptop as the destination i got this message below so I did not proceed any further as I'm not sure it will back up the files I need..
    To avoid system instability, CCC has applied a filter that will exclude system files from the backup task.
    If you would like to restore your Mac OS X system files, restart your computer from the backup volume and try the backup task again.
    If you are trying to restore a single item or folder, click the "?" button for additional suggestions.
    Is it worth giving it a try? Thanks for this btw, its further than I've got before!!

  • Help!  Got new iPhone and changed apple ID password - now I cannot find the ringtones I purchased on old phone

    I purchased ringtones through iTunes on a iPhone 3G and and iPhone 4S.  Both of these phones were company phones.  When I left that company in March 2013, I turned in the 4s to the company (still have the 3G). The day I turned in the old company phone, I went to my local AT &T store and purchased a iPhone 4S for myself and immediately changed my apple ID and password.  While I have been apple to retrieve all of the music/songs I purchased through iTunes, I have not been able to retrieve any of the many ringtones I purchased on both the 3G and the original 4s.  Can somebody please tell me how I can get these ringtones On my newer 4s?  If need be, I can go to the company I worked for and use my old iPhone 4S.  Thank you for your help.

    You cannot redownload ringtones.  They will only be where you put them.

  • I forgot my passcode for my ipod5 and I cant get to a computer. How do I find out the passcode?

    I was bored and decided to change my passcode, but when I locked it, I realized I had forgotten the passcode already. Its really bothering me and I cant figure out how to hack it or remember it an I no longer have a computer. Is there any way to fix it?

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • HT201263 i forgot my passcode for the ipod and i didnt have back up

    hi there
    i forgot my passcode for the ipod and i didnt do back up for long time.
    thanks
    yasser

    Connect the iOS device to your computer and tyr to make a backup
    iOS: How to back up and restore your content
    Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup.either the one made abov if you could make one or from an earlier one. See:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

Maybe you are looking for

  • How to see the balance under different balance if special ledgers exist???

    Some of the company using special ledgers. I need to teach user how to see the balance under different balance. I will focus on 1. display voucher 2. check GL balance Anyone have idea (detailed flow)/template (preferred) on these issues? Thanks a lot

  • Source and target directory file name should be same

    Hi, How can i generate the same file name in target directory without date and Timestamp. for eg., Source File name : yeswanth.txt and target File name also : yeswanth.txt Note : here source side the file yeswanth.txt is constant and whenever it move

  • Apple Script Help

    Hi,   I wrote the below script to delete files of a particular folder, but now I want to do that to the Documents folder. I tried using this script but it didn't work. Any ideas? Or any entirely different script that might work. Thanks. tell applicat

  • Table Reference Global Variable

    Hi, Inorder to update a table in One VI from another VI, i need a Global Variable Reference of that Particular Table. How  shall i create it. Anybody please comment on this. regards, mfp.

  • Include dynamic pages

    Hi i have a jsp page(page1) which includes another jsp file (page2), but the name of (page2) jsp file is dynamically generated. I tried using <jsp:include="<%= variable %>" />, but it's not including the page2, it's giving error. Please check the bel