I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

Try booting into Internet Recovery mode (booting whilst holding down the command, option and R keys). It will take a while to load as you're booting from Apple's servers across the Internet.
Once there, use Disk Utility to erase the "Macintosh HD" partition. After the drive is formatted try reinstalling the OS.
Good luck,
Clinton

Similar Messages

I lost the hd recovery in my mac. I already erased and the hardrve using the disk utility but then if i try to install the os x using os x utility it sees that could not find installation information for this machine .

I lost the hd recovery in my mac. I already erased and the hardrve using the disk utility but then if i try to install the os x using os x utility it sees that could not find installation information for this machine .. Plz help

Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)

I got this Could not find installation information for this machine. what i should do now? i can not use my mac, i got this Could not find installation information for this machine. what i should do now? i can not use my mac

i erased my mac then i tried to download the os x mavericks, wich i had before ; however, i got this Could not find installation information for this machine.

You should not have erased anything. Maverick uses some of the applications from the older software and now that you have erased part of the Operating System you are going to need the Original Install disc's that came with your machine. Hold down the C key while installing then do all of the Software updates then you can install Maverick.

I am trying to install OSX and I get "could not find installation information for this machine" what do it do?

Trying to install OSX and i get "could not find installation information for this machine" what do i do?

someone will be by to edit, in the meantime, NEVER post your serial number.
They wanted you to go to the Hardware section of System Profile and the part that looks like
MACBOOK PRO N,1
Anyone here has Mac Pro of 1,1 thru 6,1
http://www.everymac.com is a good place to look at model specs and history of that model, max RAM and other features.

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

Using Project Settings creates an app.config and dozens of errors about "Could not find schema information for the element...

I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>

Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages?

Could not find schema information for the attribute 'filename'

Can anyone help me.
I download the VB.NET sample source and try to run the application and got this error.
"Could not find schema information for the attribute 'filename'"
and
"Could not find schema information for the attribute 'url'"
and
"Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
Thanks
Pitiporn

Are these errors or warnings? If warnings, you should be able to just ignore them.

HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again.

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".
Any ideas? I probably have something wrong in my computer settings.

You should restore your modem to router condition and set the Airport Express to 'Bridge Mode'. A full explanation and the method of doing this is here:
http://www.wilmut.webspace.virginmedia.com/notes/airport.html

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

Try posting in the iTunes forum. You have an iTunes problem not an iPod problem

Updated to Premiere CC 2014 - Now getting Startup Error - Could not find any capable video play modules

I have a late 2013 MacBook Pro Retina with NVIDIA GeForce GT 750M 2048 MB.
Ever since the Premiere CC 2014 update, on launch, I get this error right after it shows "ExporterQuickTimeHost.bundle" loading (I tried removing this, but it still did it, so I don't think it has anything to do with the QuickTime plugin):
Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
I never got this in the CC version. I have the latest CUDA driver: version 6.0.46 & GPU Driver: version 8.26.21 310.40.35f08
The computer is unusable for about 4-5 mins after this happens until it all clears up. This whole process takes up 7-8 mins!
This same thing also happens with Prelude CC 2014.
If anyone knows what's going on I would be very grateful.
Thanks, Maz

I found a solution that worked for me. Seems to be a permissions problem. Here's the solution I found (found it here: CC 2014 startup issues : Adobe Premiere Pro):
In the finder menu click and hold on the GO menu. Hold the option button and the User library will show up. Click the User Library.
In that folder go to preferences and find the adobe folder.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
Then lock the lock again.
Now go to your OS Hardrive and click on Users, your user name, Documents.
Find the adobe folder there.
Right click on adobe folder and click get info.
In the Sharing & Permissions section there should be three names.
All should say Read & Write next to them.
Unlock the lock, switch them all to read and write.
Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
The lock the lock again.
Wait 1 minute. Then launch Premiere.
This fixed it for me.

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

After Saving File get Message "Could not find the included template"

I have a strange issue going on and it's becoming very, very annoying. When I edit a file on our web server (it's a virtual machine running Windows Server 2008) and then try to view it in my browser, I get the error message "Could not find the included template". If I refresh the page (sometimes upwards of 40 times) my page with whatever changes I made will finally load. I checked with our system administrator and he's not aware of what could be causing this.
It happens on whatever the most recent file I was working on. If it's a ColdFusion file, I get the "Could not find the included template" error. If it's a change to my stylesheet, the styles will not load. Again, in both instances it takes hitting F5 upwards of 40 times until the page displays correctly.
Has anybody else ever encountered such an issue? It's happening on two separate virtual servers (both Win 2008), one has CF9 installed and the other CF10. It get's frustrating having to referesh before the page or stylesheet get picked up. Any help or suggestions are appreciated!
Thanks.
Brian

azuro28 wrote:
> I'm new to ColdFusion and after I edit a cfm
(template.cfm) file using vim, I
> got the following error:
> Could not find the included template template.cfm
>
> page.cfm contains:
> <cfinclude template="template.cfm">
>
That means that the file 'template.cfm' is not where
ColdFusion needs it
to be so that it can include it. Which is generally in the
same folder
at page.cfm with that syntax.

I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

Similar Messages

Maybe you are looking for