I get a compiling error when trying to save a VI using 8.0.1.
While trying to save a VI recently, I recieved an error that the code could not be generated. The reason was that there was a compiling error while saving. I know have a broken arrow and can not figure out how to resolve the issue.
The thing that would help us help you the most is if you can attach a VI (in its last saved form) and a set of steps (edits) to the VI that cause it to get into the state where attempting to save it displays this compile error. Sometimes this is difficult to do, but if you can do this it gives us the best chance of being able to reproduce and figure out the issue. Let us know if you can post such a VI, thanks!
Similar Messages
-
Getting java exception error when trying to save an interface.
When I am trying to save an interface I get the following error message. Does anyone know how to fix this ?
Thanks,
Don
java.sql.BatchUpdateException: ORA-00001: unique constraint (GRANITE_LOADER_WORK.PK_TXT) violated
at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:367)
at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:9119)
at com.sunopsis.sql.SnpsQuery.executeBatch(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpTxt.setString(SnpTxt.java)
at com.sunopsis.dwg.dbobj.SnpTxt.a(SnpTxt.java)
at com.sunopsis.dwg.dbobj.SnpTxt.setStringWithXRefs(SnpTxt.java)
at com.sunopsis.graphical.frame.a.it.bH(it.java)
at com.sunopsis.graphical.frame.bn.q(bn.java)
at com.sunopsis.graphical.frame.bn.bu(bn.java)
at com.sunopsis.graphical.frame.bn.y(bn.java)
at com.sunopsis.graphical.frame.bn.b(bn.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)Hi psamp1,
Were you able to solve this problem?
We have exactly the same issue...
Thanks
John
Edited by: John Chinnappan on Mar 29, 2011 8:06 AM -
Why do I get a program error when trying to save a file
I've loaded and reinstalled photoshop elements 3 times. I can not save any files. all i get is cannot save file do to program error message'
this is a brand new product with a program error and they want me to pay them to fix there problem. it ain't right.which version of Photoshop Elements are you using? Also, do tell us about the flavour of Operating System you are using and the format in which you are trying to save your file.
You can also try saving your file to a different location( e.g. desktop) to check if your computer has any permission issues -
'System Error' when trying to save Form Manager Registry Settings
Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
SteveWe are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored? -
Error when trying to save/apply in OAM Console (credential store / wallet)
So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
And in the log files this also appears:
<Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
Any help would be greatly appreciated!
Thanks,
Chris
Edited by: ch**** on Mar 29, 2013 12:29 PMWe are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored? -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
-
I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.
I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data. -
I keep getting a 4000 error when trying to burn discs....only been since the update....Help
Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?
Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever. -
Getting an "u43m1d204" error when trying to update Illustrator CS6
I keep getting an "u43m1d204" error when trying to update Illustrator CS6 to 16.2.1 as part of my Creative Cloud subscription.
I'm updating via the Adobe Applicatioin Manager (Version 7.0.0.233 (7.0.0.233)).
I've tried it several times now over the past few days.
Best regards,
ErikSame problem here, and I have waited more than a few minutes as asked by the Adobe Application Manager, but I am still getting the same error.
Mac OS X Mountain Lion (10.8.2) -
i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod
"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks. -
I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.
Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.
-
I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please HelpI received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button. -
i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush -
I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming backBack up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any helpZachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.
Maybe you are looking for
-
Photoshop cs3 on windows xp crashing
Can anyone help w/ this issue. When I open a jpg file, and then open another one, photoshop crashes everytime - whether I drag the file into the workspace or do a file open multiple files. I updated cs3 on the adobe site... <?xml version="1.0" enco
-
My Safari has begun to crash on a regular basis, it began a couple of days ago. There is no specific website that I am visiting that it occurs on. Here is my latest error report. Any advise is much appreciated!!! Thanks! Date/Time: 2012-02-10 21
-
Hi All, I have got alert categories created by client,I have to use alert categories and dynamic alert message in BPM.i am not authorized for transaction ALRTCATDEF.Can you tell me where i can see dynamic alert messages for alert categories created.I
-
My child deleted my app store, can someone tell me how to get it back, please.
-
Smartform in A$ and Letter size
Hi Sdn, We have a smartform which prints the form presently in A4 size , is it possible to have the form triggered in both A4 and letter size using the same form. Regards, Nagaraj.