I get a question mark next to email addresses when I try to send a meeting request and it fails

Outlook 2010, standard Win 7 setup.
I am trying to send a meeting request and when I bring up the address book to insert email addresses it seems to insert the address but it has a gray question mark next to it.  Sending then fails. Even an email address manually typed in gets the question
mark.
Odd thing is that from a regular email I can insert the same address from the same contact list and it works fine.
Why does it fail in meeting invites by not in email?

Hi,
When you hover your mouse pointer on the mark, or click on it, do you see any hint?
When sending the meeting request fails, do you see any error message?
If you are an Exchange account user, try to send a request to the people in your organization, I suppose it works.
Just a guess, try to clear the nickname and the automatic completion caches to test the result:
http://support.microsoft.com/kb/287623/en-us
Regards,
Melon Chen
TechNet Community Support

Similar Messages

  • Trying to set up a group email "RAM" that will contain multiple email addresses.  Receive error messages "check SMTP settings" or "Invalid email address" when I try to send a message to the group.

    I am trying to set up the group email "RAM" that will contain multiple email addresses.  I have inputted the name "RAM" as a corporation.  In the section labeled "Email" I have inputed multiple email addreses so that when I want to send an email to the group "RAM" I just have to input the name "RAM" in the section labeled "To" , input the Subject in the Subject box & the email will be sent to the multiple addresses, yet when I do I receive either one of two error messages being "Invalid Email Address" or "Check SMTP settings" each of which allows me the option of with cancelling the email or send it anyway.

    Bump. I'd like to know, too. I even have some synched Groups from my Apple Address Book I email to using Apple Mail on the Powerbook, but I can't see how to do a group mailing on the Touch either.
    In normal Mail, I just start typing the name of the group, and it autocompletes, I hit return, and it fills in all addresses in the Group.

  • TS3048 I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped.  It seems as though the line of number keys along the top aren't actually doing what is printed on them.  Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes.  So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key.  The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along.  Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead.  It is going to drive me mad if every time I want to type something it is a guessing game....!  What do you suggest - question mark

  • New IPhone 5. Apple id is my email address. when I try to set up i cloud it automaticly changes my apple pass word to my provider pass word. How can I get it to stay my apple pass word?

    New IPhone 5. Apple id is my email address. when I try to set up i cloud it automaticly changes my apple pass word to my provider pass word. How can I get it to stay my apple pass word?

    Thanks for the flag J.K. - they contaced me and solved my problem.  On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

  • How do I delete old email addresses, when I try and play some of my songs I get a not authorized pop-up with an old email address?

    How do I delete old email addresses, when I try and play some of my songs I get a not authorized pop-up with an old email address?

    Edit the list the comes up when you go to the Window menu and select "Previous Recipients".
    charlie

  • Icloud still shows my old email address when I try to enter, asking me for a password I no longer have. I need to change my email address and password in ICLOUD but I can't find a way to do it. Any ideas? Thanks.

    icloud still shows my old email address when I try to enter, asking me for a password I no longer have. I need to change my email address and password in ICLOUD but I can't find a way to do it. Any ideas? Thanks.

    Logout (System Preferences>iCloud) then login with the new address and password.

  • Why does my apple I'd not verify my email address when I try to sign in to iMessage?

    Why does my apple ID not verify my email address when I try to sign into iMessage

    It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

  • I keep getting blue question marks in my email

    I keep getting blue question marks in my e mails

    The message may be talking about icloud storage -or- available memory on your device.
    Go to Settings>General>Usage to see how much "Storage" you have available.  Farther down the list is the available storage on iCloud.
    Also check:
    Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud.
    A device needs many MB of storage in order to perform a backup to iCloud.
    Also see:  http://support.apple.com/kb/ht4847

  • HT1430 I receive emails but when I try to send emails, I get a box that says that the "recipient was rejected by the server because it does not allow relaying"

    I can receive emails over AOL but cannot send them. When I do, I get a box that says "recipient was rejected by the server because it does not allow relaying"

    That's because you did not enter your screen name and password for the outgoing (SMTP) mail server on the phone. Or if you did they got erased. Go to Settings for the account and enter them.

  • Their is a question mark on my ichat application when I try to open it. I can't find it in my applications folder, what should I do

    The app will not open please help.

    Reinstall it from your Mac OS X 10.6 install disk, using Pacifist if needed, and then run the 10.6.7 combo updater.
    (58538)

  • I have just replaced my pc still on win 7 but I cannot log into sync it won't recognise my email address when I try to log in.

    The email and password are correct, I can check them on my Mac, which was linked to the PC I just replaced

    Hi AnthonyV,
    Can you please check if you were on the old version of sync? This will have a pair my device options when you want to add a device. If so, [[How to update to the new Firefox Sync]]
    If not, what you can do, is if you have a back up of the profile from the last device you can [[Back up and restore information in Firefox profiles]]
    Sync is not used for a back up service.
    If the password is incorrect, you can try to reset the password from accounts.firefox.com on the new sync.

  • I get following when I try to send an e-mail and its just happend: "too many messages. Please check the message and try again"

    I use BT SMTP server and this just started today. Any ideas as I don't want to move to outlook

    To diagnose problems with Thunderbird, try one of the following:
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • When I try to send an email it says that it was rejected by the server. How do I fix.

    How do I fix my email. When I try to send it comes back thar it was rejected by server.

    Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server>SMTP>Primary Server then turn Server ON and fill in both User Name & Password>under Outgoing Mail Server.

  • IPhoto email shows question mark instead of email template

    I sent some photos using iPhoto last night, i have gmail account i use to send photos. I learned after i had emailed the photos through iPhoto my receipts received the email with a question mark instead of the iPhoto template. I tried sending a couple to myself and my wife (she has hotmail if it matters) but all of them showed the question mark i attached a photo below. Any help in fixing this would be great.
    Thanks

    probably not right format....
    i think that the iphone only supports .jpg or whatever but i am not 100% on that

  • Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

    Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
    If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for

  • Reader X freezes in Windows Enterprise

    I've researched everything so far but can't fix this issue...When you load up a PDF document in Acrobat and click on comment, it freezes up...any idea why? we've loaded Symantec, Java 1.6.24, Office 2010, Multi-language pack and shockwave, all the mo

  • Read an ascii file line by line

    I am new with CVI, and I need to read an ascii file with multiple lines in the following format: at_test_2_to_13=0.861000 at_testabcd_9_to_21=0.712000 at_abdgx_5_to_8=0.892000 here is the code for writing in the ascii file: sprintf(ctResult, "%s=%f\n

  • Good Video But Terible Audio

    I have just got a Phillips SPC900NC USB web cam, I have got the iChatUSBCam 2.1 & Macam.0.9.0 software to make it work with iChat. I get great video but the audio is very choppy and the spoken words are indistinguishable. Can anyone help me to get it

  • Help on FILE to File Scenario

    Hi all,    I am trying to create a simple a XML File TO XML File scenario. Somehow the server is picking up the input file properly but it is not putting the output file properly. When I go to RunTime WorkBench and click on Message Monitoring It show

  • Problem of performance with xerces?

    I am to build a server which parse XML message with sax(xerces) but when i send very many message to it,the parsing is sometime very slow (10x slower for 1 of 20 messages sent).Is anybody have an explication? (soory for my english :) )