I get access denied when I try to search on your site.
Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.
Hi,
You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
Closing thread
Similar Messages
-
I have been using Adobe Reader for many years and scan forms into my computer so that I can fill them with text. I have suddenly started getting Access Denied pop up when I attempt to do this. Does anyone have any thoughts as to why or how to correct?
Yes, I am adding comments onto a scanned image and the reader is v. 11.0.10.
I am Secretary of an organization and rather than hand write all the necessary forms I have them scanned in and then I would position the cursor to type the information on the them. Linda -
Getting access denied when trying to loging to sharepoint 2010 site collection.
only Site Collection Administrators are able to logging in to the site,other than that
If i give any View or read or contribute permission to any user then he is not able to logging in to the site getting Access Denied ERROR.
Below is the error generated in the LOG folder & attached here with screen shot.
Request (GET:http://sharepoint-app:2525/_layouts/accessdenied.aspx?closeConnection=01
vijay kumar designer 2010Tanq it solved my problem Fadi
Abdulwahab
vijay kumar designer 2010 -
I get access denied when I add a page to a workset in EP 7
I get access denied when I add a page to a workset in EP 7.
Please advice.Hello,
This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
Regards
Deb -
Get "Access Denied" when click open a PDF file
Hi Friends,
Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
Can anyone face the same issue please help me.
Thanks,
Tiru
tirupalHi,
If you are able to open the same document earlier,then anonymous access enabled on your doc library then.
If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
Murugesa Pandian.,MCTS|App.Development|Configure -
I get this message when I try to open iphoto: Your photo library is either in use by another application or has become unreadable. What can I do?
restart your system
if that does not resolve it backup youoriPhoto librtary, depress the option and command keys, launch iphoto and rebuild the database
also report the version of iPhoto and on the OS please
LN -
Why do i get access denied when trying to download CS6 Design & Web Premium?
I have a serial number for CS6 Design & Web Premium. I have a new computer I want to set it up on. I went to download it from Download CS6 products but I keep getting:
Access Denied
You don't have permission to access "http://trials2.adobe.com/AdobeProducts/DSST/CS6/win32/DesignWebPremium_CS6_LS16.7z" on this server.
Reference #18.d1e1a60.1425598287.217a0f4
Does anyone know what I'm doing wrong?
Thanks for any help,
NoahMake sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
-
Oracle Apex export application getting access denied when trying to download
DB: 11.2.0.3
Apex: 4.2.2.00.11
Apex Listener: 2.0.3.221.10.13
WLS: 10.3.6.0
Chrome: Version 29.0.1547.76 m
and IE 10.0.9200.16660
I'm the admin of the workspace that has one application. Made a change to the application and went to export the application so I can source control it.
Followed the Export wizard while in the application, hit the Export/Import button and clicked Export. Changed the File Format to "Database", Export Supporting Object Definitions to "No" and left everything else as default. Clicked the Export Application button and get "Application 108 exported" success maessage. Navigate to the Manage Export Repository and I see the exported application labled "f108.sql and I click on it and I get "Access Denied".
Whats the trick? What am I missing?
If I change File Format to "Unix" or "DOS" the file automatically downloads.
Thx,
RussHmm I wonder if it has something to do with:
bug #16760897
http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-422-known-issues-1940409.html
The bug description mentions ORA-06502, but get_file has a when others exception handler that simply returns "Access Denied".
What do you folks think? -
Windows 2008 R2 intermittently getting access denied when logging in
Hi,
I recently built 2 new Virtual Machines. They both run on Hyper-V (version 6.2x).
One is Windows 2008 R2 standard and the other Windows 2008 R2 Datacenter. These are both remote desktop servers.
These are both connected to a domain.
The domain controller is linux/samba based, this will mimic the Windows NT4 style domain controller environment.
Within each Virtual Machine I have a remote desktop users group, that is a staff group.
Intermittently users get an access denied error when logging on. This only happens when logging on as domain users.
If this happened all the time, I might think the machine needed to be removed and re-added to the domain but as it's intermittent, I don't see the trust relationship as the problem.
Any ideas?
ThanksHi,
Thanks for your post in Windows Server Forum.
Before providing you some information, I would like to get some more information to resolve your issue.
- Have you notice any specific error when trying to remote login?
- Did you check GPO setting option “Allow log on through Remote Desktop Services”
As group policy and the user group are interrelated with each other. There are 2 types of user rights.
(1) Logon rights (2) Privileges
These two plays an important part in allowing an RDP session to the server. Also need to check in GPO Setting for more option.
a. Allow log on through Remote Desktop Services : Users\Group must be added for Remote Session
b. Deny log on through Remote Desktop Services : Users\Group must not be added for Remote Session
For checking the setting in GPO follow below path:
- Start > Run >gpedit.msc
- Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment
For more information, refer beneath article.
“Allow Logon through Terminal Services (Remote Desktop Services)” group policy and “Remote Desktop Users” group.
http://blogs.technet.com/b/askperf/archive/2011/09/09/allow-logon-through-terminal-services-group-policy-and-remote-desktop-users-group.aspx
Hope This Helps!
Thanks. -
Keeps saying 'Secure Zone Access Denied' when I try to log in
I'm try to test out my new site. I made an account to log in but when I log in it just says,
"Secure Zone Access Denied"
What's wrong? It let me log in as a user for a while but after a few minute this happened and now I cannot log in as a user at all....I actually made a second account to try out and it works so for some reason it's just that first account that doesn't work... Weird....
-
Users getting access denied when trying to create a security group
Hello,
I created an MPR for granting right through an approval workflow for joining security group, but getting the following error. Any thoughts what could be going wrong?
Error processing your request: The operation was rejected because of access control policies.
Reason: The operation failed as a result of insufficient access rights.
Attributes: ExplicitMember
Correlation Id: edc226e9-ecb9-42c2-ab20-4fa8b5643056
Request Id:
Details: No policy grants the Requestor permission to complete all changes.
This is what I see in the even log:
Requestor: urn:uuid:9373552a-c063-4fb9-abcd-3501d151a061
Correlation Identifier: edc226e9-ecb9-42c2-ab20-4fa8b5643056
Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.PermissionDeniedException: ManagementPolicyRule ---> System.Data.SqlClient.SqlException: Reraised Error 50000, Level 16, State 1, Procedure DoEvaluateRequestInner,
Line 1319, Message: Permission denied: <ai><Name>ExplicitMember</Name></ai>
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.ResourceManagement.Data.DataAccess.DoRequestCreation(RequestType request, Guid cause, Guid requestMarker, Boolean doEvaluation, Int16 serviceId, Int16 servicePartitionId)
--- End of inner exception stack trace ---
at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier, Boolean maintenanceMode)
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Put(Message request)
Thanks,
JohnHi,
You probably missing another MPR to give the right (checkbox "Grants permission") to Add and Remove value for attribute "Explicit member". Set an authorization workflow is not enough!
Regards,
Sylvain -
HT1491 get black screen when I try to search for books by category all other functions ok
get black whebtrying to search for books by category
Hello there, mrecon.
First you may try closing out of the iTunes store by following the steps in this Knowledge Base article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, then you may want to do the steps above again and then restart/reset your iPad using these steps:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Access Denied when Student Uploads Course in Drop Box
All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
The SPC16001002134 is the course identifier.
Access to the course for student is set to download:
Access Level: Download
Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
Group Access Label: StudentHi,
I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
Thanks. -
Why do my Visitors users get Access Denied in my New Forms - Mobile Devices Only
The issue I have is that I have a SP2013 Site with a group Visitors.
the default Site Permissions have been set to Read.
I then created a SharePoint List with a People Picker.
I broke the Security inheritance and gave the Visitors group Contribute Permissions
In Browser mode, they can access the site, open all links and even add content to list.
When I do the same actions on a mobile device, All the visitors get Access Denied when clicking on the Add Content Link.
The Link I make available is "https://myweb/sites/site/Lists/mylist/NewForm.aspx"
I have found some suggestions about unplublished content, but this does not explain why the user can perform the required actions on a desktop, but not on a mobile device using the same linkHi,
By mobile do you happen to mean iPhone? There has been quite a few issues with SharePoint 2013 and iOS authentication. You might want to refer to the following exchange.
http://apple.stackexchange.com/questions/146808/ios-8-safari-sharepoint-2013-windows-authentication-support
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield -
I keep getting this message when I try to open FCP X. "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7". To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
I have no idea what this means. Particularly the part about "Brian-Massmans-Computer-7." I don't even know what computer that is.
I'm guessing it could have something to do with the fact that I've still got FCP 5 installed. But it's not running.Try repairing permission in the Disk Utility and rebooting,
Maybe you are looking for
-
If statement not working/being run
I have a button which makes a panel flip 180 on the x axis if its name is not in an array called "panes", it determines this by running an if statement. If its name is in the array then the button should run some code to make the panel flip back. How
-
How can I file share with another personif both of us are using Mac operating systems (one of us using a Mac laptop and the other using iMac). Our intention is to have a working document that can be changed by both parties over time and both parties
-
has this happened to anyone else
-
I am trying to authorize my computer so i can download my music and books off of itunes
I am trying to authorze my computer so I can download or synk my muisc and books from Itunes please help
-
No valid task list for material "" plant "" for selection criteria
I am getting the following error while creating a production order: No valid task list for material "" plant "" for selection criteria Does anyone know how to fix this? thanks, Scott