I get an error when I try to forward e-mails with attachments.  Advice?

I have tried many different ways to forward e-mails with attachments to no avail.  I sometimes get a question if I want to include attachment or not.  When I answer yes, I sometimes get an error message and at other times the forward goess through, but without the attachment.  Help!

No I have not checked the IOS version requirement but I have a similar c2940 where the upgrade was no problem.
Here is the sh ver output:
Cisco Internetwork Operating System Software
IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(13)AY, RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 26-Jun-03 18:33 by antonino
Image text-base: 0x80010000, data-base: 0x805BA000
ROM: Bootstrap program is C2940 boot loader
31-kjeller-adm uptime is 8 weeks, 6 days, 1 hour, 40 minutes
System returned to ROM by power-on
System image file is "flash:/c2940-i6q4l2-mz.121-13.AY/c2940-i6q4l2-mz.121-13.AY.bin"
cisco WS-C2940-8TF-S (RC32300) processor (revision B0) with 20778K bytes of memory.
Processor board ID FHK0806Y07R
Last reset from system-reset
Running Standard Image
9 FastEthernet/IEEE 802.3 interface(s)
1 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:24:50:CE:40
Motherboard assembly number: 73-8783-05
Power supply part number: 341-0085-01
Motherboard serial number: FOC08051PPK
Power supply serial number: HIC0802020C
Model revision number: B0
Motherboard revision number: A0
Model number: WS-C2940-8TF-S
System serial number: FHK0806Y07R
Configuration register is 0xF
Ole Martin

Similar Messages

  • Why do I keep getting an error when I try to sync my phone with iTunes?  It says I don't have enough privileges.

    Why do I keep getting an error when I try to sync to iTunes? The error says "you don't have enough privileges?"

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Why do I get an error when I try to configure a channel with the tktds7x4 driver?

    I use the TDS754D scope. My complete function call is:
    errStatus = tktds7x4_ConfigureChannel( ScopeHandle, "CH1", 5.0, 2.0, TKTDS7X4_VAL_DC, 1.0, VI_TRUE);
    When I step through it, I see that I get an error on the driver line
    viCheckParm(Ivi_SetAttributeReal64 (vi, channel, TKTDS7X4_ATTR_VERTICAL_RANGE, 0, range), 3, "Range");
    I'm also getting an error with tktds7x4_ConfigureEdgeTriggerSource
    I just downloaded and installed this driver, and it is the first time I have tried to use it. I'm running it in Microsoft Visual C++ 6.0, but it is a C program.

    I hadn't done too much debugging when I wrote the question. All I knew was that I got a timeout error when I used that call. Over the weekend I tracked it down to a problem in the function tktds7x4_InvalidateTriggerAttributes, and specifically, the line
    checkErr( Ivi_GetAttributeViString (vi, VI_NULL, TKTDS7X4_ATTR_INSTR_COMM_TRIGGER_SOURCE, 0, BUFFER_SIZE, triggerSource));
    My scope does not have the 2C option, so there is no communication trigger function. When the driver queries the communication trigger source, the scope apparently does not return anything because it does not understand. I added the lines
    if (!strcmp(triggerSource, channelName))
    checkErr (Ivi_InvalidateAttribute (vi, VI_NULL, TKTDS7X4_ATTR_TRIGGER_LEVEL));
    checkErr(
    Ivi_GetAttributeViInt32(vi, VI_NULL, TKTDS7X4_ATTR_INSTR_OPTIONS, 0, &options));
    if (isOpt2C)
    before that line of code (at line 7360), along with a closing brace before the label "Error:"
    Also, at line 399, I added the following 3 lines:
    { "CH1" , "CH1" },
    { "CH2" , "CH2" },
    { "CH3" , "CH3" },
    { "CH4" , "CH4" },
    even though the comment for triggerSourceStringTableEntries says that it is for non-channel sources only. I am not positive that it was necessary, but I think it was.
    With those changes, the driver now works correctly for me. I have attached my updated driver source code. I am never happy to change a commercial driver, though. If someone were to re-download this driver and re-install it, all my changes would be lost, and the driver would no longer work.
    Attachments:
    tktds7x4.c ‏664 KB

  • TS2972 keep getting an error when i try to use home shared with my apple ty 2nd gen

    home sharing error it wont connect

    Hello mjlamonea
    If the update had an error, then check out the article below to restore your iPhone. It will walk you through putting your iPhone into recovery mode and then using iTunes on your computer to restore it. If you have a back up through iTunes or iCloud, then your can put that back up back on after you have completed the restore.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

  • WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

    AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99220)

  • I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

    I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
    Thank you,
    JTF

    I am having the same problem - the install crashes around 40%. 
    I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription.  The error message is: 
    'Acrobat installer has encountered an unexpected failure.  Please try again.  If it continues to fail, contact Adobe support.'
    I have tried several times but keep getting the same error message.  Any ideas?
    Thanks,
    Cindy

  • "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why?

    "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

    Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

  • TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

    I get "server error" when I try to use icloud.1 on my Windows 7 pc
    How do I resolve this problem?

    Hi doggywag,
    Yes, you must have an iOS device or a Mac to create an iCloud account.
    Cheers,
    GB

  • I get an error when I try downloading files - 8520 Curve

     I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

    Hello !
    Could you please be more elaborative for explaining your issue?

  • I get an error when I try to move instances of public folders.

    We have exchange 2003 and exchange 2010 setup in a coexistence environment. I get an error when I try to move instances of public folders from Exchange 2003 to Exchange 2010. "Unable to create the required MAPI profile. Please verify that you have
    sufficient permissions to write to the MAPISVC.INF file. ID no: c103073a Exchange system Manager." I have checked the permissions on the exchange 2003 server. I am unable to locate the MAPISVC.inf file on the exchange 2010 server. This is the last set
    before we begin our move to exchange 2010 and then on to exchange 2013. Any help would be appreciated.

    Hi,
    Do you mean you get the error like the following one?
    An error occurred while trying to establish a connection to the Exchange Server. Be sure that port 443 (for ssl) or port 80 (for non-ssl) can be reached. If you are connecting to the public folders, be sure that the public store is mounted. If you are connecting
    to the mailboxes and the progress bar shows particular mailbox. Be sure that the user has at least one email address.
    Exception failed to connect using secure URL https://gsfcdp16es/esadmin/admin/nyu.email.gs.com/publicfolders with error. 
    The underlying connection was closed. Unable to connect to the remove server.
    Please check if you can expand PF tree in ESM.
    Please make sure SSL is disabled on /ExAdmin and  /Public virtual directory. If possible, you can recreate the ExAdmin virtual directory to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • I get this error when I try to download i-tunes "Errors occured during installation before I-tunes could be configured.

    I get this error when I try to download I-tunes.  "Errors occurred during installation before I-tunes could be configured.  Your system has not been modified to complete installation. Run installer again.  I have tried running the installer again several times and keep getting this error.  Any suggestion as to how to fix this?

    Finally the above problem was sovled. First click on control panel and search for all Apple software and uninstall all related to Apple software. Then download itunes again and run it to install latest itunes and after installation is finish. All  Apple software shall run properly.

  • Error Message:  I keep getting this error when I try to download apps or songs :  MZCommerce.CreditBalance Mismatch.Mobile_message   Can someone tell me how to get rid of this?  It is very aggravating when trying to use the IPAD.

    I keep getting this error when I try to download apps or songs :  MZCommerce.CreditBalance Mismatch.Mobile_message   Can someone tell me how to get rid of this?  It is very aggravating when trying to use the IPAD.

    Try to go to Settings and then Store. Tap to your Apple ID and select View Apple ID. Now choose to check your payment information and when you're done tap Done. I had to rewrite my three digit code of the credit card and now it works.
    Oh, I also activated Genius for Apps but I don't think it makes any difference.

  • I downloaded a movie with apple TV, but I get an error when I try and play.

    I downloaded a movie with apple TV but I get an error when I try and play

    And that erors is.....

Maybe you are looking for

  • Slideshow in QT 7.1.3 in Windows: Frame Rate Fixed at 29.97

    I have my sequentially numbered JPGS, Open Slide Show in File menu, highlight the first JPG, but then the Frame Rate is fixed at 29.97, no opportunity to set to 3 seconds per frame or 10 seconds a frame or anything except 29.97 per second. I have uni

  • Creative mp3 reliabili

    do all these issues on this message board not tell you something? i have had 2 creative zen 4gb mp3 players and both have gone wrong in a couple of weeks, very little actual direct support too. i can definitly say that i wont be getting another one!

  • Stored Proc with SSRS multi value parameter gives " Must Declare scalar Varaiable @StateID

    Hi All, I have one stored proc with @fromDate , @Todate and multivalue input parameter@StateID of type integer. When I run below stored proc via SSRS by selecting multiple values thru multiValue parameter into @StateID...it gives error saying "Must D

  • Streaming audio restarts after stopallsounds

    Hello, the site in question is thirdcache.com - i've got streaming audio playing as background music, however after someone clicks the stop all sounds button it stops, however when the background music reaches the end of it's timeline, it starts back

  • Expired subscription clean up job failing

    the history message from the step: Date 19/11/2014 08:41:11 Log Job History (Expired subscription clean up) Step ID 1 Server TV-SQL1 Job Name Expired subscription clean up Step Name Run agent. Duration 00:00:01 Sql Severity 16 Sql Message ID 1934 Ope