I get an error when trying to import MP3 files in iTunes?

When I try to import mp3 files into iTunes (version 6), I get an error message of:
The file "song file name" can not be imported An unknown error has occurred (-50).
I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
(I've tried a complete removal and re-install, but that didn't help)
Anyone know why I'm getting this error message and how to correct things?
Thanks in advance for any help !!!

C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

Similar Messages

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Getting an error when trying to update payment information on iTunes

Getting an error when trying to update payment information on iTunes

If you would like help from these user forums then saying what the error message was would be useful.

PST Capture error when trying to import .PST files

I am currently migrating mailboxes from Exchange 2010 to Exchange 2013 on prem. I have installed PST Capture 2.0 and 64-bit Outlook 2013 on a Windows 2008 R2 machine and have installed the PST Capture 2.0 agent on a workstation that has some .pst files
on it. PST Capture finds all the .pst files on the workstation, but when I use PST Capture to try to import PST files into a mailbox on Exchange 2013, I get the error "Import error: Error opening mailbox [email protected]".
I created a userID with a mailbox to run PST Capture. Based on the instructions at
https://technet.microsoft.com/en-us/library/hh781035%28v=exchg.141%29.aspx I have made that user a member of the groups that are assigned the Public Folder Management role, the Mailbox Import Export role and the Organizational Management role. The
user is also a local admin on the machine running the PST Capture console. While the error sounds like a permissions issue, these are the only permissions I could find documented for PST Capture. I am starting PST Capture with "Run as administrator"
Any ideas why this isn't working? Are there any other permissions that the PST Capture user needs? Is there anything else I need to do?
Thank you very much for your help.

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

I'm getting an error when trying to update my ipod through Itunes (1413)

I have a black 30gb ipod video, Itunes tells me that a newer version of the Ipod software is available (1.2) so I click update. I get an error saying The iPod "IPOD" could not be updated. An unknown error occured (1413).
What do I do?
Thanks in advance

did you have any trouble when you were installing itunes? in particular, did you run into trouble during the "registering modules" phase of the install?

I am getting an error when trying to import a calendar to ical

I am trying to add a calendar subscription to ical but it keeps giving me an error -1 message. Any suggestions on how to correct the error?

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7. Even though the drive was shared, I still had to go into the folder properties and share it with everyone. Once i got the lock off and rebooted I was able to add captions again.

Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

HT1918 I get an error when trying to buy a book in iTunes - says "Paypal is not supported on this device". Which is fine, but my payment method in my iTune settings is for a credit card.

Same error occurs in any device I use: iPhone (4) or iPad (2).
Any idea how to reset something, or otherwise let me make a purchase?

And I just say for the record how much it ***** when you have to deal with a company who thinks so little of customer support, that you can't talk to anyone in person? Sheesh, the recording I got when I called hung up on me!

Get -3256 error when trying to use "multiple speakers" in iTunes

I have had a LOT of Airport problems since switching to Leopard. For the moment, the Airport does seem to now work. I use an Airport Extreme 802.11n, and an Airport Express using WDS. I had a TON of problems with my MBP connecting, running great, then slowly losing bandwidth. For the moment, all is working. The next hassle was that my formerly working WDS stopped working. Now, the base station says WDS is happy. iTunes show the Airport Express is available to broadcast to.
It lets me select multiple speakers, but then gives and error -3256.

I think that I just solved your multiple speaker issue in another post; check out: http://discussions.apple.com/thread.jspa?messageID=5765343&#5765343. Hope this solution works for you too.

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

When trying to import music files I get a error message that says "importer reported a generic error" I'm using windows 7, DellPC, installed premiere elements 13 2 days ago. Also when previewing and editing video,screen looks great but when I transfer to

When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?

chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

Cloudroom error when trying to import a video that causes Premiere to crash

I'm getting this cloudroom error when trying to import a video that causes Premiere to crash

Hi K Hayes,
Kyle Hayes wrote:
I'm getting this cloudroom error when trying to import a video that causes Premiere to crash...
It is difficult to see the entire message of the warning dialog box, but I suspect it is the following: c:\cloudroom\releases\2014.09\shared\adobe\mediacore\mediafoundation\api\inc\Keyframe/Key frame.h-146
If so, see this post by one of our engineers: Re: Premiere pro cc 2014.2 crashes when opening a project
Removing any imported or third party presets might help the issue.
I'm really sorry for this issue. We are currently investigating the cause.
Thanks,
Kevin

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Why do I get This message when trying yo import my pictures?

Why do I get This message when trying yo import my pictures?
The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
Please help, Thanks

What version of iPhoto are you using and from where (and how) are you trying to import the photos?
As a first fix attempt try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and see if you get the same message. If you don't then the problem lies with your current library.
OT

I get an error when trying to import MP3 files in iTunes?

Similar Messages

Maybe you are looking for