I get no sound when I play games on my iPhone 5s with just the speaker but headphone it works. Music works both ways. What do I need to do so I can hear my game without headphones like I can my music

When playing games on my iphone 5s I can't hear any sound but if I play music from where ever it works. If  I put on headphones I can hear the game would like it to work with sound with out them too what did I do to mess up my phone help please

Hello tiffay8,
Thanks for using Apple Support Communities.
From your post I understand you're not getting any audio output from your speakers when you're playing games.  Follow the steps below to resolve the issue:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Similar Messages

  • After ios5 update, I am not getting any sound when I play music.

    After ios5 update, I am not getting any sound when I play music (iphone  speakers or headphones).  I get sound from games, previewing songs in iTunes, etc.  Any idea why?  I've resynced and shut down my phone and that didnt help.
    iPhone 4

    Beer,
    is that when you want to play music over the air (airplay) like BT headset or something?
    because i am facing the below issue in my car.
    the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
    upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls.

  • I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??

    I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??

    Restore it using the computer it normally syncs with, this should not require an iOS update.

  • I'm not getting any sound when i play a video; HP pavilion dv7 Windows 7

    I'm not getting any audio when I try to play a video, such as youtube; I have an HP pavilion dv7....op sys is Windows 7;  Funny thing is that when my brother signs in under his User ID, he gets audio, but I don't when I'm the user.  I've checked all of the on/off audio mute buttons that I know of.
    what can you suggest?

    Is it just sites like YouTube? Can you play music files-mp3/cd ,hear Windows system sounds,etc?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • When i run labview6.1 on my pc with windows the "DAQ Solution " was gary doesn't work i don't know why ?i don't have a daq board card is that a reason? i want to know what should i have to use labview in data acquisitio​n?

    i am using a platform windows 98 ,and labview 6.1
    thanks in advance

    With the NI-DAQ driver, you can build VIs, but you can not acquire data until you have a Data Acquisition card. You can get these from National Instruments over the web or by calling.
    J.R. Allen

  • When i decline calls in my iphone 4 with ios7 the phone blocks. I have to turn it off and turn it on again to unblock it.

    I've had this problem with previous OS also. I get to annoying windows asking if I want to cancel, return or a list of available messages to send to the incoming phone number.

    Take a look at this
    iOS: Not responding or does not turn on - Apple Support
    Pay particular attention to suggestion number 5. The one that talks about restoring the device using iTunes and using Recovery Mode if necessary. Most likely, that is where you are headed.

  • When i open iTunes U it comes up with just the brown bookshelf but no icons to click on and then it closes. I've deleted it and then re-download it and it still doesn't work.

    On the bookshelf there's no icons to click on and after a mintue it closes. I've deleted it and then re-download it and it still doesn't work. Im using a ipod touch 4 and im on 5.1.

    I, too, am having this problem and it's annoying.  The app just shuts down every time I use it. Too bad cuz it looks lie there are so many wonderful courses in the catalog.
    Any tips on how to fix this would be appreciated!
    Thanks.

  • Im not getting any sound when i select a track and put it in the arrange area

    Im new to pro logic,, when i select a track and put it in the arrange area,, im not getting any sound when it plays.. I can hear it play in the list of samples, but not when its in the arrange area,,, help meeeeee

    Are you putting the file on an instrument channel rather than an audio channel? That's one possibility. The track could be muted is another.

  • I'm getting no sound when I receive a call or text?

    I'm getting no sound when I receive a call or text?  Any suggestions

    Is the mute switch at the side above the volume buttons ON? (Red shouldn't be visible)
    Check also Settings > Sounds >

  • When I play games I can't hear sound on the speaker but the music works on speaker

    On my iPad when i play games I can't hear the sound on the speaker but the music in videos play with the sound on speaker the only time I hear the sound on the pad while playing games on the pad is headphones why is that?

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • My iPad battery getting low quickly when im playing games. What should i do ?

    My iPad battery getting low quickly when im playing games. What should i do ?

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have the new iPad and I don't get any sound when I load games such as angry birds or monkey island. Any suggestions.

    I have the new iPad a n I don't get any sound when I load games such as angry birds or monkey island. Any suggestions?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Cannot get any sound when playing .avi files

    Hi All
    I am running QT version 6.5.3 on Mac OS X 10.2.8 and cannot get any sound when playing .avi files but the picture is perfect.
    I have installed the following: M-Peg 2 playback component, AVI Components and AC3 component.
    Does anyone know if I am missing anything or how I can fix this?
    Many thanks
    Garry

    Download and install Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

  • TS3274 no sound on games but sound when i play music

    no sound on games but sound when i play music

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • The laptop fan makes sound when i play games on my laptop...what could be the problem?

    the laptop fan makes sound when i play games on my laptop...what could be the problem?

    Then install iStat Menus 4.04 so you can provide us with some temperature and fan speed data.
    What about before you start the game? After you start the game do this:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    If it's the game causing the problem then either something is wrong with the game or it's not compatible with Lion.

Maybe you are looking for

  • Images Split After Saving in Camera Raw

    I am editing in camera raw from Bridge, I edit, then save. At first the thumbnail remains the same then shortly it becomes 2 half images. Very frustrating!!! I just started this new workflow giving bridge a try and I was very excited about it .. unti

  • QM-Movemetn types?

    Hi ALL, Does anyone know the movement type when we post the material from QI stock to Scrap and Reserve,in Usage Decision QA11??Thanks inadvance

  • Operations of a maintenance order

    Hi all. I'm using the BAPI "IBAPI_ALM_ORDER_OPER_READ" in order to obtain all operations of an order. With some orders this BAPI doesn´t return me all operations, just a part of them. Someone can help me to know why does it happens? Or maybe another

  • To call webmethods using RFC(Remote Function Module)

    Hi Sap Group. i have got a situation on how to call the webmethods using Remote Function Module ,i know that there should be rfc destination created in sm59 already,so can i use the  same existing rfc destination which was used to call webmethods wit

  • HT204053 adding email accounts to my master account

    how do i add an another email account to my master account- apple id