I get noise when I combine left and right from the headphone output.

I need to combine the left and right channels of a Macbook Pro at the output connector. When I build the cable to do this, there is significant static noise introduced. If I break the short between left and right, the noise goes away.
(I'm doing this to put both channels of audio into a single side of a set of headphones, and I really don't want to buy a mixer.)

Eddie,
I just ran a test on my G5 Logic system (Logic 9.02) with an internal RME PCI 8in/8out Audio Card and I get perfect separation bouncing to a stereo audio file using standard panning. Click on one side and a couple of crunchy guitars on the other. Each side is completely separate.
So, it seems to point to your hardware unless you have some other audio routing that we've missed.
I'm re-doing my setup so I may try a couple of other tests as I go along.
pancenter-

Similar Messages

How can I combine Left and Right audio?

Hi,
When I record video, one lapel mic records to the left channel and the other records to the right channel in one audio track. I can't seem to figure out how to combine them within Premiere Pro (I've already attempted searching the forums for more info). I know in Sony Vegas you can right click the single audio track and select "Combine" and it will combine the 2 channels so that when people watch the end product you have both voices coming out of both speakers.
Any help would be appreciated.
Thanks
Kelly G.

Hello,
Yes i have the same issue.
I use the duplicate Audio track and fill left and right all the time.
when i am doing Interview videos i usually have one person on channel 1 and the other on channel 2 and it comes out as L and R in Premiere.
Today i was shooting with myself on Channel 2 and a shotgun for some ambient sound on channel 1.
In Vegas or FCP 7 there is a simple effect to drag and drop called " Combine" that nicely combines the L and R channels each into stereo.
I used to use it quite a bit and think it would be a great addition to Premiere Pro.
So i am wondering several years since this was first post if Premiere does in fact now have this option...and where it might be that i over looked it?
If not.....is there an easier way to do this than the fill left and right method?
Thanks so Much!
Mark

How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

I'm partial to this series:
After Effects basics tutorials by Andrew Devis
The subject matter is very clearly-defined by topic.
And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version. Please share.

My phone has been smashed I need to get records of all my iMessages and texts from the last month. How do I get these?

My phone has been smashed I need to get records of all my iMessages and texts from the last month. How do I get these?

Do you have a backup of your iPhone which contains these messages?
If so, you can restore a new iPhone from that backup during setup.
If not, the messages are gone.

HT201322 It doesn't provide me with the option to hide when I swipe left and right nothing changes or happens

When I try to hide something from my App Store purchased list i found out form this to swipe left or right and it should provide me with the option to hide the item but it doesn't and it's annoying me seriously. I deleted the application for a **** good reason someone please help me or tell me what to do

It doesn't appear to work on iOS 6 (and neither does unhiding, though you can still view and download them) - whether that is permanent or only temporary I don't know. You should still be able to hide things via your computer's iTunes.

How can I write left and right in the same line of a richtextbox?

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks
As
Viorel_ says "Perhaps there are other much easier solutions. For example, create two
RichTextBoxes with no borders (if you only need two columns of text)" but the real issue would be saving the info in the RichTextBox's (RTB's) RTF or Text to two different RTF or TextFiles. Although I suppose if it was just going to
a TextFile then you could somehow use a delimited text file so each same line number of each RTB is appended to the same line and delimited. That way you could probably load a split array with each line from the text file splitting on the delimeter per line
and providing RTB1 with index 0 of the split array and RTB2 with index 1 of the split array. I'm not going to try that.
This is some leftover code from a long time ago. It has three RTB's. RTB1 is there I suppose because the thread asking for this code wanted it. RTB2 is borderless as well as RTB3. The Aqua control in the top image below is the Panel used to cover RTB2's
scrollbar. So RTB3's scrollbar is used to scroll both controls.
I forgot to test if I typed past the scroll position in RTB2 if both would scroll as maybe RTB3 would not since it would not have anything to scroll to I suppose.
Maybe this code can help or maybe not. The bottom two images are the app running and displaying nothing scrolled in RTB2 and RTB3 then the scroll used in the bottom image.
Disregard the commented out code in the code below. It was there so I left it there. I suppose you should delete it. Also I didn't set the RTB's so one was left aligned and the other right aligned. I believe the Panel becomes a control in RTB2's controls
when it is moved to cover RTB2's vertical scrollbar but don't remember although that seems the case since both RTB2 and RTB3 are brought to front so if the Panel was not one of RTB2's controls I would think it would be behind RTB2 and RTB2's vertical scrollbar
would display but don't remember now. In fact I don't really remember how that part works. :)
Option Strict On
Public Class Form1
Declare Function SendMessage Lib "user32.dll" Alias "SendMessageW" (ByVal hWnd As IntPtr, ByVal msg As Integer, ByVal wParam As Integer, ByRef lParam As Point) As Integer
Const WM_USER As Integer = &H400
Const EM_GETSCROLLPOS As Integer = WM_USER + 221
Const EM_SETSCROLLPOS As Integer = WM_USER + 222
Dim FixTheProblem As New List(Of String)
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CenterToScreen()
Panel1.BackColor = Color.White
Panel1.BorderStyle = BorderStyle.Fixed3D
RichTextBox2.BorderStyle = BorderStyle.None
RichTextBox2.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.BorderStyle = BorderStyle.None
RichTextBox3.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.Size = RichTextBox2.Size
RichTextBox3.Top = RichTextBox2.Top
RichTextBox3.Left = RichTextBox2.Right - 20
Panel1.Size = New Size(RichTextBox2.Width * 2 - 16, RichTextBox2.Height + 4)
Panel1.Left = RichTextBox2.Left - 2
Panel1.Top = RichTextBox2.Top - 2
RichTextBox2.BringToFront()
RichTextBox3.BringToFront()
FixTheProblem.Add("Curry: £6.50")
FixTheProblem.Add("Mineral Water: £4.50")
FixTheProblem.Add("Crisp Packet: £3.60")
FixTheProblem.Add("Sweat Tea: £2.23")
FixTheProblem.Add("Motor Oil: £12.50")
FixTheProblem.Add("Coca Cola: £.75")
FixTheProblem.Add("Petrol Liter: £3.75")
FixTheProblem.Add("Shaved Ice: £.50")
FixTheProblem.Add("Marlboro: £2.20")
FixTheProblem.Add("Newspaper: £.25")
FixTheProblem.Add("Spice Pack: £.75")
FixTheProblem.Add("Salt: £.50")
FixTheProblem.Add("Pepper: £.30")
For Each Item In FixTheProblem
RichTextBox1.AppendText(Item & vbCrLf)
Next
RichTextBox1.SelectionStart = 0
RichTextBox1.ScrollToCaret()
Dim Fix As String = ""
For Each Item In FixTheProblem
Fix += Item.Replace(":", "^:") & vbCrLf
Next
Fix = Fix.Replace(vbCrLf, "^>")
Dim FixSplit() As String = Fix.Split("^"c)
For i = 0 To FixSplit.Count - 1
If CBool(i Mod 2 = 0) = True Then
RichTextBox2.AppendText(FixSplit(i).Replace(">"c, "") & vbCrLf)
ElseIf CBool(i Mod 2 = 0) = False Then
RichTextBox3.AppendText(FixSplit(i) & vbCrLf)
End If
Next
End Sub
Dim RTB2ScrollPoint As Point
Private Sub RichTextBox2_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox2.VScroll
Dim RTB2ScrollPoint As Point
SendMessage(RichTextBox2.Handle, EM_GETSCROLLPOS, 0, RTB2ScrollPoint)
SendMessage(RichTextBox3.Handle, EM_SETSCROLLPOS, 0, New Point(RTB2ScrollPoint.X, RTB2ScrollPoint.Y))
'Me.Text = RTB2ScrollPoint.X.ToString & " .. " & RTB2ScrollPoint.Y.ToString
End Sub
Private Sub RichTextBox3_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox3.VScroll
Dim RTB3ScrollPoint As Point
SendMessage(RichTextBox3.Handle, EM_GETSCROLLPOS, 0, RTB3ScrollPoint)
SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(RTB3ScrollPoint.X, RTB3ScrollPoint.Y))
'SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(0, 10))
End Sub
End Class
La vida loca

Possilbe to record seperate left and right from line

Hi i want to record 2 audio sources at the same time from my line in. I am using a Y cable to connect to the audio sources. Does anyone know if this is possible?

gopher wrote:
ok what i want to do is have to seperate mono signals from one stereo input. i would like to have? seperate audio device such as /dev/dsp0 and /dev/dsp, one for the left channel and one for the right channel... im not recording anything high quality, just speech...
If you want to record using microphones then, you need to use cartain type of mics (I quess you know that already) or external sources where you have connected those mics. If your mono sources are type of line-source then it's as easy as Katman points.
Why to use deticated software instead of some Smart Recordes etc. ? ... better control over recording (L/R balance, post-processing, editing, etc.).
jutapa

Sometimes a song will not download completely. When I delete it, and pull from the cloud it is still incomplete?

Every once in a while, when I am downloading a purchesd album, one of the songs will fail. The error is that the server had to rese
When it finishes downloading, it does not have the whole song. When I delete it altogether and re-download it from the Cloud it is the same version. I cannot find a way to "start over" and truly download the song again. The itunes store wont let me, etc.
Help!
Tom

Under Edit > Preferences > Advanced click Reset Cache.
Look inside your media folder and delete the folder Downloads if present.
Clear your browser's cache.
Try again.
If the problem persists contact iTunes Store support through the Report a problem links in your account history.
tt2

"Front Left", "Front Right" from the same speak

I am having an issue I am hoping to get answered. I have Boston Acoustic speakers which I am currently using on a new computer with a SoundBlaster XiFi. I can only hear sound from the left channel (The speaker that plugs INTO the right speaker that plugs into the Subwoofer). When I go to run an diagnostics test, it says :
Speaker : Front Left... Front Right
Speaker 2: (Nothing)
Speaker 3: Rear Left
Speaker 4: Rear right.
I know that this is not a problem with the hardware as I can plug these speakers into the computer right next to me & they work fine. I see that this problem crops up very often on these forums, I hope someone can point me in the right direction.
Thanks

No jack problem at all. I have also suffered myself some problems with "speaker switching" with the X-Fi. Only a full reinstall of all creative drivers has solved it, at least for me. I have posted it some times here, but I always get silence as a response. A common problem is that front right speaker dissapears when it was working perfectly.
It's a bug, no matter what Creative says (unfortunately they say nothing), there are a lot of posts regarding this

When panning full left and right in logic pro 9, how can i stop one side from bleeding into the other?

I'm creating a Click track for live performance. I Have 3 audio tracks panned full left (-64) and a Click track panned full right (63) but when I play the track they bleed into each other. If anyone knows a way around this that'd be great

Eddie,
I just ran a test on my G5 Logic system (Logic 9.02) with an internal RME PCI 8in/8out Audio Card and I get perfect separation bouncing to a stereo audio file using standard panning. Click on one side and a couple of crunchy guitars on the other. Each side is completely separate.
So, it seems to point to your hardware unless you have some other audio routing that we've missed.
I'm re-doing my setup so I may try a couple of other tests as I go along.
pancenter-

Probably a simple answer; centered links with floating link descriptions, both left and right of the links?

Attatched is an image of the requested result. I'm new to Dw so this might be an easy bit of code, but with research I haven't been able to find an answer.
Ideally, the numbers in the middle are links (centered on the page); and the text is a description of the link which floats to either side of the links, but is not necessarily centered; nor linked.
I would really appreciate the help of someone more knowledgeable. Thanks in advance.
The code I'm working on follows the image.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>design communications</title>
<style type="text/css">
body,td,th {
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
font-style: normal;
font-weight: lighter;
font-size: 10px;
color: #FB6145;
body {
background-color: #FFFFFF;
.strike {
text-decoration:line-through;
.links {
color: #FB6145;
text-decoration: none
a:visited {
text-decoration: none;
color: #FFA493;
a:hover {
cursor: none;
text-decoration: none;
a:active {
text-decoration: none;
.back-arrow{
color: #FB6145;
text-decoration: none;
font-size: 14px;
</style>
<link rel="shortcut icon" href="images/e_rimoldi_favicon_02.ico" type="image/x-icon" />
<style type="text/css">
</style>
</head>
<body>
<p><a href="question mark/prefix_0_0.html">? </a></p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div class="links">
<p align="center">| <a href="works_03_01_perspective.html" id="01"
onmouseover=
"document.getElementById('02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>01</a> |</p>
<p align="center">| <a href="works_03_03_plan.html" id="02"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>02</a> |</p>
<p align="center"> | <a href="works_03_02_section.html" id="03"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>03</a> |</p>
<p align="center">| <a href="works_03_04_mapping.html" id="04"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('back-arrow').className='links';"
>04</a> |</p>
<div class="back-arrow">
<p align="center"><a href="works index_1.0.html" id="back-arrow"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';"
>«</a></p>
</div>
</body>
</html>

hey marty,
Perhaps this updated code will help clarify. I want the links to be centered on the page. But the link descriptions to float to either side? Does that make sense?
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>design communications</title>
<style type="text/css">
body,td,th {
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
font-style: normal;
font-weight: lighter;
font-size: 10px;
color: #FB6145;
body {
background-color: #FFFFFF;
.strike {
text-decoration:line-through;
.links {
color: #FB6145;
text-decoration: none
a:visited {
text-decoration: none;
color: #FFA493;
a:hover {
cursor: none;
text-decoration: none;
a:active {
text-decoration: none;
.back-arrow{
color: #FB6145;
text-decoration: none;
font-size: 14px;
</style>
<link rel="shortcut icon" href="images/e_rimoldi_favicon_02.ico" type="image/x-icon" />
<style type="text/css">
</style>
</head>
<body>
<p><a href="question mark/prefix_0_0.html">? </a></p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<div class="links">
<p align="center">| <a href="works_03_01_perspective.html" id="01"
onmouseover=
"document.getElementById('02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>01</a> | meddling</p>
<p align="center"> kongenshus | <a href="works_03_03_plan.html" id="02"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>02</a> |</p>
<p align="center"> | <a href="works_03_02_section.html" id="03"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '04').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('04').className='links';
document.getElementById('back-arrow').className='links';"
>03</a> | design communications</p>
<p align="center"> green river | <a href="works_03_04_mapping.html" id="04"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( 'back-arrow').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('back-arrow').className='links';"
>04</a> | utah</p>
<div class="back-arrow">
<p align="center"><a href="works index_1.0.html" id="back-arrow"
onmouseover=
"document.getElementById('01').className='strike';
document.getElementById( '02').className='strike';
document.getElementById( '03').className='strike';
document.getElementById( '04').className='strike';"
onmouseout=
"document.getElementById('01').className='links';
document.getElementById('02').className='links';
document.getElementById('03').className='links';
document.getElementById('04').className='links';"
>«</a></p>
</div>
</body>
</html>

How to migrate stored procs accessing columns "LEFT" and "RIGHT"

Hello!
I have to migrate a SYBASE11-Database to Oracle 8.1.7.
How can I migrate Stored Procs that access tables that contain columns 'LEFT' and 'RIGHT'?
OMWB reports a parse error "encountered: ,". If ommit the words 'left' or 'right' or if I write 'left()' or 'right()', it works. But I have to use these columns and we cannot change the database model.
It doesn't work with quoted column names like this: "LEFT" or "RIGHT".
I use OWMB 1.3.1.0.0. Anybody any ideas? Thanks in advance.
Yours, Heiko Kaschube

This is a simple matter to fix.
As the words LEFT and RIGHT are treated as reserved words by the stored procedure parser, they cannot be used successfully as column names within Oracle PL/SQL.
In order to get the stored procedure to parse, you can append an underscore to all references to LEFT and RIGHT e.g.
left_
then right click on the stored procedure name and select 'parse procedure' from the drop-down menu. The procedure will now parse and the generated PL/SQL can be viewed within the Oracle model menu tab.
It will now be necessary to remove all the underscores previously appended to the words 'left' and 'right' from the PL/SQL version of the stored procedure in question. Again, this can be done within the Migration Workbench.
Hope this helps.

Can i turn down front left and right using ddts decoder with the g500

hi want to get ddts 100 decoder for my gigaworks g500.when im watching a move i have to have it up on about 2.7 bars.to hear the center speaker then the action is to louad.i can turn down center and rear and sub but no front left and right.can you turn down front left and right using the decoder.do you still have to use the controll pod for the gigaworks if i had the decoder in or do u use the decoder to turn it up thanks plz help.

System Preference > Accessibility
Select Mouse & Trackpad in the left side box.
Double-click speed
Make it slower by dragging the pointer to the left.
Best.

Swipe left and right with magic mouse doesn't work in safari

Hey there,
I accidently deleted something in the navigation bar in safari.
Now when i swipe left and right with my magic mouse, it doesn't go to the previous pages anymore. But the wierd thing is it still works with my magic trackpad.
And even wierder the swipe left and right of my magic mouse still works in other programs.
So can anyone help me with this?
Thanks in advance!

Check Gestures in System Preferences > Trackpad
It's working here on Safari 7 / v10.9 Mavericks

Clips import with black edges left and right

I viewed my clip (avi file) using quicktime to confirm that it was the right one that i wanted to import and it looked fine. Then i imported into imovie and it doesn't fit the whole screen. It's got about 1/8 inch of black along the left and right. The weird thing is that when i import photos it does the same thing but i scale them to 102 % to correct. How can I correct this?

bear in mind that tv broadcasts are often stretched/zoomed/cropped etc to make it appear that it is widescreen, when really it is 4:3.
also it is possible that your TV is simply stretching to make it fill your screen.
your TV may be able to stretch it to fill the screen, but the appletv will always output it in the correct aspect ratio.
also it is only recently that most of the tv output has been widescreen. 6 years ago when wire season 1 was produced, 4:3 non-widescreen was very much the norm, especially in USA.

I get noise when I combine left and right from the headphone output.

Similar Messages

Maybe you are looking for