I get the bar to say "running on reserve power" but when I plug in the charger it has 40% or more showing. Any ideas?
This problem has developed all of a sudden. I unplugged the computer from the charger and within minutes I got the message "Running on Reserve Power." When I plugged it in the battery percentage read 80%. After few minutes the green light on the charger was lit. The next day whne I got the same message I plugged it in and it showed 44%. Is this a battery issue? Or something else?
How old is your battery?
How many charge cycles does it have?
And, FYI, your question concerns your laptop, but you asked your question in the iMac forum.
Similar Messages
-
I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?
Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch. -
I want to set up my iphone to sync with my macbook but when I plug it in via USB my iphone doesn't show up under devices in itunes even though it is plugged in correctly and is charging through my computer. How do I get it to show up? I've tried restarting my computer.
If your iPhone does not appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions here:
http://support.apple.com/kb/ts1591 -
I stopped itunes running when i plugged my iphone in, now i want to reactivate it, any ideas?
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Just bought a new Ipod Nano, 6th generation, was tryin to following directions on syncing, when I plug it in too my computer,
it doesnt give me any directions on syncing or connecting to my computer, can someone please help me??There should be an option (on the left hand side of your iTunes) for your iPod. Then when you click on it you will just need to setup and there will be an option to sync at the bottom right hand corner
-
I have a problem getting my IPad to start from shutdown. I get the Apple logo then when it is ready for me to slide my finger across the lower part of the screen to get the home page, it takes at least four attempts. When it does eventually open the home page, all works perfectly well. The screen is clean so I cannot see any reason for this annoying problem. Any suggestions will be gratefully received. Thank you. Colin.
i would reset it, then restore as new
-
I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." However, when I follow these instructions, delete the backup and try again - I get the same message. Any ideas what is wrong?
Hi,
Try this thread. https://discussions.apple.com/message/12661408?messageID=12661408
Carolyn -
My iphone syncs with everything except iphoto.
It used to be able to do it, but has now stopped.
I'm trying to sync photos so I can upgrade my phone, and keep all my photos taken with my old phone.
But I cannot get the photos from my phone to my computer because when I link my phone to my mac iphoto doesn't recognise it at all.
Any ideas?
ThanksLots of folks fix these kinds of issues with a simple restart of the phone. Others require a Reset of the phone.
Regards
TD -
hi please help i pressed my home button on my i phone 5 this morning to check the time and the screen went big as if its zoomed in i have switched the phone off but when it came back on the screen is still big i cant connect to i tunes either as i have a pass code on my phone i cant type it in as the screen is to big. please has anyone got any ideas on how to fix this.
tweetypie80 wrote:
thank you for your help
You're welcome. -
I have no idea why it does that. I have it plugged into an extension chord if that helps.
Plug adapter directly into wall socket. If still problem, all components are covered by Warranty. Make Genius reservation and take iPhone, wall adapter, and Lightning USB cable to Apple for resolution.
-
When I try to open a site I normally access i'm getting a bar that says,Firefox has blocked this site from opening another window then on the right side of the bar gives option to allow or not. Never did that before. Thanks
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?
To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action. -
I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?
Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling -
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi
Maybe you are looking for
-
How to find out the textframe contains "stroke color" (or) "fillcolor"?
How to find out the textframe contains "stroke color" (or) "fillcolor" via javascript. Kindly advise me with sample.
-
New GL activated without data migration
Hi all, we have some three projects lined up, one of it is new gl, due to some reasons we have postponed the go live of new gl but other two projects wants to go ahead with their go live, so we provided them an environment where new gl is active but
-
Removing Role expert from the GRC Pad
Hi Guys we are using three products of GRC ie RAR , SUP and Compliance user provisioning but NOT the Role Expert. Is there any way that I can show only these three tools in the GRC pad and remove the Role expert. At the moment it is grey out but stil
-
Unable to open new keynote document
I purchased and installed keynote. When I open the program, the option for opening a new document is grayed out. How do I fix that?
-
Cascading cisco 3510 mcu to an accord mcu
Has anyone done this?...We are having difficulty doing this. We get audio but no video. I cannot find a document on cisco's web site on how to do this....Can anyone help?