I get this error when trying to prepare a project for sharing to itunes or iDVD. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)
The project could not be prepared for publishing because an error occurred. (-50)
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W
Similar Messages
-
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!
Do you mean trying to purchase an iPhoto book? Try rebooting and ordering again. If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
OT -
i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?
i have done that
same result
the phone has a sim in it that is not active. does this cause the fault in question? -
Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume. tried everything.
Pondini's Time Machine FAQ for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Time Machine- Troubleshooting backup issues -
# Question
I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?The backend end is in serious pain....on many levels.
Try this: Connection Problems Form -
Why do I get This message when trying yo import my pictures?
Why do I get This message when trying yo import my pictures?
The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
Please help, ThanksWhat version of iPhoto are you using and from where (and how) are you trying to import the photos?
As a first fix attempt try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and see if you get the same message. If you don't then the problem lies with your current library.
OT -
The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.
UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.
This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene -
get this message when trying to authorize my computer. This apple id has not bee used with the itunes store.
Do i have to purchase something, before i can authorize my computer.Thank you in advance for any answers received.You cannot buy anything from the iTunes Store until you authorize the computer. Are you unable to authorize it? If so see the following:
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7. -
I get this message when trying to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.
Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Is anyone getting this message when trying to access Yahoo Email? "Cannot Get Mail, The connection to the server failed?"
I have Yahoo mail (POP) account. Mine is working fine at present. I do occasionally get asked for password while sending mail. I have had your issue in the past and it usually clears up in a few hours. Sometimes I sign out and then back in and it starts working again.
-
I keep getting this message when trying to watch TV or films
This content requires Adobe Flash Player, which is not supported by your device
Is there an app that will play this. I can't find one....Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news and media sites, have their own apps in the App Store.
If you do a search on this forum you will find hundreds of other threads on the subject. -
I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
Look here:
Burner - device failed to calibrate the laser power level for this media. -
why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.
Same issue. What are they doing?
Macbook Pro Retina Yosemite 10.10.2 -
Photoshop CC 2014 - The file can not be saved in path because an error has occurred
Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
MichaelUpdate: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.
Maybe you are looking for
-
Https connection from Provider
I am creating an https URLConnection from a Provider. I generally use com.sun.net.ssl.internal.ssl.Provider from the jsse package. Does anyone know which class I should use in the portal environment. I am searching through the lib jars and don't see
-
My problems with WiFi after 10.5.8 update (and how I solved them)
Hi, I also had problems getting online after last Leopard update. First I tried to delete all network related preferences (as posted here http://discussions.apple.com/message.jspa?messageID=9965959#9965959) but soon the problem reappeared. I need to
-
Connecting iMac to Panasonic DVD Recorder
I need to connect my new iMac to my Panasonic DVD Recorder, which only has 3-RCA input. I tried it via connecting the iMac to my HDVT and then from the TV to the DVD Recorder , but that did not work. Is there a way to connect the iMac to the DVD Reco
-
Greetings guys, My video person is trying to put together a spec for a video encoding system. In his spec he wants to use an xserve with some sort of external storage - initially he was going to hang off a lacie drive - We as a company are looking to
-
[b]Help in calling web services method[/b]
i doing at client side now. iwish to call the method which provide by axis. here is my code.... import hotel.*; //normal servlet package import import javax.servlet.*; import javax.servlet.http.*; import java.io.*; import java.sql.*; import java.text