I got error in installation of SAP 4.7 please check and suggest

Error in saplicense. is there any file i have to change or modified durint the installation phase.

Hello,
in case of installation this prob occurs if the there is a problem with the software. If possible  dump all the files from the origial cd/dvds and try again.
The reason is as follows :
Normally the IDES comes in  DVD/cd . The vendor from whome u got the software has copied it into cds so naturally one dvd is copied to more than one cds. When u dumped it to the HD most probbaly some files are not dumped in the proper location where it is expected.Hence some pointer is unable to find the link. Ask the person from whome u got the software regarding the locations as to where to dump the contents of the cds . Once the cds are dumped to the hd in the right locations there wont be any prob in installation.
Pl dont forget to award points
Regards

Similar Messages

  • I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor"

    I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
    Please anyone help me.
    Thanks

    Error "Installer Failed to Initialize" | Install desktop application | Windows

  • Got error during installation saying serial number is invalid for a photoshop and premiere elements package I bought from Adobe website last year. Anybody has a solution for this? Thanks.

    Got error during installation saying serial number is invalid for a photoshop and premiere elements package I bought from Adobe website last year. Anybody has a solution for this? Thanks.

    Does your serial number show on your account page?
    https://www.adobe.com/account.html for serial numbers on your Adobe page... or
    Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • Error Acct. assgt. category 3 not defined (please check your input)

    Hello all I'm trying to create BAPI_PO_CREATE and getting error " Acct. assgt. category 3 not defined (please check your input) ".
    What is this Account assignment category concept in SAP ? What input value should i change ?

    Hi
    In addition to Srinivas, account assigment 3 is missing in OME9 in your case
    So before running your Bapi make the necessary settings
    Thanks
    vishnu

  • I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

    Hi all,
    I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
    I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
    Thanks in advance!

    Most of the documents have sensitive info on them.  I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
    Thanks for you help.

  • Using Bridge CS5 exporting to flickr get error message "Unable to connect to Flickr, please check your internet connection and try again."?

    using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again."  please help?

    I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
    Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014!

  • Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later.

    Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network.  What gives?

    Try disabling your firewall; both on your PC and the external Firewall/Router.

  • Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

    Hi,
    I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
    when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
    Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
    so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
    Could you please advise on this.
    Appreciate all and any help.
    Thanks,
    Divya

    Hi Divya,
    Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
    To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
    values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Error in Installation of SAP NW2004 : DB Oracle on Sun - Unicode

    Hi Experts,
    I am doing a installation of BW with DB platform as Oracle and OS SUN. I am getting an error in the installation at step 35 of the Database Installation. I am doing a unicode installation.
    Details of the error message:
    The Error Message is at the step DBstats update.
    The exact message in the error is :
    Could not update Database statistics Diagnosis Command : brconnect -u /c -f crsyn -o SAPTBW returned 3 which is not a success code. Solution : See brconnect.log for details.
    The brconnect log gives the description as below
    root@tsapngn # cat brconnect.log
    BR0801I BRCONNECT 6.40 (15)
    BR0280I BRCONNECT time stamp: 2006-08-08 16.08.20
    BR0301E SQL error -12705 at location db_connect-2
    ORA-12705: invalid or unknown NLS parameter value specified
    BR0310E Connect to database instance TBW failed
    BR0280I BRCONNECT time stamp: 2006-08-08 16.08.20
    BR0804I BRCONNECT terminated with errors
    Primary Investigation: I have done some primary investigations and have gone through the sapnotes mentioned below. Still The Problem is not resolved.
    592657 - ORA-12701/ORA-12705/ORA-12907
    706132 - Composite note Problems with Oracle 9i
    602843- Environment settings for R/3 Oracle
    393620 - problem through incorrect ORA_NLS33
    Please Help.
    Cheers
    Sundeep

    Hi There,
    I got the similar issue when I install the R3 470 EXT2.00 SR1 ON LINUX/ORACLE 9207.
    The difference is, the kernel cd I download comes with brconnect 7.0, so I have to downgrade to brconnect 6.40 to fix the problem.
    Before you do the next try, you can logon as ora<sid> and run the 'brconnect -u /c -f crsyn -o SAPTBW' manually. It maybe prompt you need to set some environment variable such as ORACLE_SID. And also, make sure you set the correct LD_LIBRARY_PATH to as the installation guide mention, you can try to set ORA_NLS33 too. In my case, I can run the cmd above manually with ora<sid> or <sid>adm, but when I run it under root, I got another error (not 12705). so, I have do the next step, downgrade the brtools.
    From your log, you have the correct version of brconnect but I will still suggest you download the new DBATOOLS FOR KERNEL 640 from OSS and restart the SAPINST, I think the new brconnect 640 (higher patch level) could be help.
    Good luck

  • Error during installation of SAP NetWeaver 2004s Abap Trial Version

    The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
    ERROR 2008-03-13 09:47:27
    FSL-00001  System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
    127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
    This error occurred at the end of the installation.
    Any idea?
    Thank's, Thiago.

    >
    Thiago Amaral wrote:
    > Ps: I already restarted my notebook.
    That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript.

  • Business Explorer Error after installation of SAP GUI 7.10

    Hi Experts
    we have installed  SAP GUI 7.10 successfully and there seems to be an error on Business Explorer.. while processing some of the queries in designer it gives out an error message " critical program error occured.The program has to close.Please refer to the trace for further information" this caused  the entire application to close.
    Trace : Error(08.11.07 15:19:10.965): mode completion failed, rc=-1 (error=6 UI ThreadHdl=1436)
    please advise on this
    thanks
    lasitha

    Hi ,
    I have updated the GUI for the latest patch , that is 5. and still at sometimes when using query designer "critical Error" msg used to appear.. i have checked the logs but it doesnt give out any clue why this error occurs.. if  ya have any suggestion please let me inform as well..
    Thanks !

  • Error during installation OS 10.8.2 getting restart  and thin black break screen

    error during installation OS 10.8.2 getting restart after apple logo several times and thin black&white crashed screen

    I had this problem too.
    Go to http://support.apple.com/kb/DL1580
    Download the update manually and install. Worked on my MBP15 retina.
    Regards
    Chris

  • My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error that disk cannot be umounted. Please help! Thank you very much.

    My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error disk cannot be unmounted. Please help. What can i do? Thank you very much.

    First have you got a backup of your data? If not try to get one now while you have some access to the drive. The drive is probably faulty and will need to be replaced, without the backup you risk losing the data.
    Have you a bootable external USB drive with Mavericks on it, if so boot from that and try and repair or erase the drive and reinstall Mavericks.
    If you don't have Mavericks on an external drive,  boot from you Leopard DVD ( I am presumimg your profile is correct) and run Disk Utility from there, you may be able to erase the drive and reload Leopard. You can then install Mavericks. Even if all that works you will most likely need a new drive in the near future.

  • I am having difficulty installing the Adobe pro. it show Error during installation. How can i fix this and install the Adobe ?

    Hello I am having difficulty installing my Adobe so how can i install it without and error code poping up?

    Hi chukwuka99904147,
    Please tell us the error that you're receiving, what version of Acrobat you're installing, and whether you're on Mac OS or Windows.
    When we have a few more details, we should be able to point you in the right direction.
    Best,
    Sara

  • Cannot activate facetime on iPhone 5 and got below message  "Could not sign in. Please check your network connection and try again". All networks work well (WI-FI or At

    I got my new iPhone 5 Last Friday. However I can not activate facetime on the new iPhone 5. All other function work well.
    I used my apple ID and always get the below message " Could not sign in. Please check your network connection and try again".
    My network work well. I can access internet, apple store with no issue via wi-fi or AT&T 4G. No password issue as I can use the same apple ID register other access and apple store.
    I noticed that many users are complaining the facetime after upgrading to iOS6. Not sure if this is the reason?
    Any one here can help on this?
    Thanks

    Facetime is accessed through Contacts or Messages. The only place you will find anything else in is Settings, where you would activate it. There is no stand alone app for Facetime like on the iPod or iPad.

Maybe you are looking for

  • Configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN

    Hi guys, really hoping that someone can help me with configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN. Basically, I have created a new forest and installed a new exchange organisation in this forest.  Both forests are l

  • ATV3 not using optical audio with mirroring

    MacBook Pro to the Apple TV mirroring works fine for video but not audio.  The audio is from the TV speakers with mirroring but the ATV is connected to my amp and speakers via the optical audio output on the ATV3.  The ATV outputs to the amp / tuner

  • Shiny buttons, UI art in Photoshop techniques

    I have seen a lot of request for how to make custom button art for us no artists.. I have found some resources on the web that may be of interest. I am not a representative of any of these sites, but have found the tutorials useful for UI creation. J

  • Remove message from message determination in billing docs

    I want to generate an SD billing document ONLY if another message is not determined to the some document. I'm determining the billing message type to be printed by Sales Organization. I started to send Electronic Invoices to some partners, and I want

  • How to sync photos in photos library to iphone?

    Before the recent update, I used to be able to choose to sync my photos in iPhotos library to my phone. (I would always carry photos taken in the past 6months on my phone.) But now I can't choose iPhotos Library/Photos Library to sync. I never keep s