I got stuck on "Getting Started" guide

I'm obviously new to C++. Sorry, for a question that might seem obvious to you.
I can compile the Helloworld project. I cannot get it to run.
I can not complete the instructions for the "Visual C++ template." I've copied the file and folders to they're appropriate places. Visual Studio gives me an error when I'm trying to create the project.
I did compile the Annotator sample and it did run properly.
I started out with Visual Studio 2008. I'm also trying the Visual Studio 11 beta... even more problematic.
I've downloaded the SDK twice. Thinking something may have been corrupted.
Has anyone gotten this to work with Visual Studio 2008?
Is there a problem with one of the template files or is there something wrong with the instructions or is there something wrong with my brain?
thank you for your help,

Studio 2011 might be problematic. I haven't given that a try yet (no reason to at our end since we're stuck on 2005 for the forseeable future anyways). And its not officially supported by the SDK yet. Not sure if it will be until a fair bit in the future (though I'm not saying its not doable, it probably is).
Honestly, I've always just taken a good sample project and modified it to be my basis. If you open up the vcproj (or whatever the extension is in 2008) and .sln, you can just do search & replace on 'annotator' or whatever the project is called to give a name you like Then you just change the name in code and once it all compiles you can make your own plugin. Its honestly easier than building one from the template. At least, I find it that way.

Similar Messages

RoboHelp 7 Getting Started Guide

Hey everyone,
Has anyone seen this PDF file or been able to download it
from Adobe?
I just went to the RoboHelp Support Center - Documentation
page
http://www.adobe.com/support/robohelp/documentation.html),
tried to click on the link to this PDF in the right hand column
under "Top Support Topics", but then I got an "access denied"
message.
Thanks,
Jim

Peter,
Thanks, I checked out your "Before you Install" article, read
it, and bookmarked it, since I'm sure it'll come in handy when I
work with my support resource to install RH 7. I also found a bunch
of RH 7 troubleshooting pages from Adobe. I was hoping to review
the RH 7 Getting Started Guide before and during my evaluation of
RH 7 on a non-production machine over here, so I can determine what
we're in for. The "Getting Started" guide for RH X5 was pretty
helpful when we first purchased the tool.
Help authoring used to be done by just a few of us here
(about 4) up until recently, even though we had 12 (mostly unused)
licenses. Soon, we're going to at least double the number of active
users and maybe even buy a few more licenses.
Please let me know if and when you find out anything about
that PDF file.
Jim
[email protected]

Apple-created Getting Started Guide for iTunes?

Several months ago, I was able to locate a .PDF entitled "iTunes Getting Started" that gave great instructions for using iTunes. I've used it in the past in my teaching and my students found it helpful.
Today, I went looking for it again and cannot find it. I can find the "Getting Started" series for each of the iLife apps EXCEPT iTunes.
The ones for iLife '08 are hosted at http://www.apple.com/support/manuals/ A Google search returns all the '06 version Getting Started guides, but nothing I use returns the iTunes Getting Started document.
I know I've used one for iTunes, but just can't locate it.
Does anyone have a copy they'd share/post? Or know where Apple's got it stored?
Thanks,
BAS
South Bend, IN

I don't know of a PDF, but perhaps these sites will help:
The New User's Guide for iTunes
iTunes 101
iPod 101

Download of Getting Started guide

I'm trying to download the Getting Started guide of 9iAS Portal Release 2, to view it offline, from the address
http://portalcenter.oracle.com/servlet/page?_pageid=356&_dad=ops&_schema=OPSTUDIO
but the server toolsweb.us.oracle.com isn't correct.
Is there another link?
Thanks

If you go to Portal Center (OTN), under "Release 2 - Open, Productive, Complete - Learn It" you'll find a link named "View Offline" http://toolsweb.us.oracle.com/pls/tools/docs/FOLDER/ROOTFOLDER/EIT/EITDOC/DOCDELIVS/DOC_DRAFTS/WEBDBDRAFTS/GS_SITE.ZIP
that is incorrect.
Is that material available elsewhere?

Java rts Netbeans getting started guide

Could any one please point me to the correct "Java rts Netbeans getting started guide".
http://netbeans.org/kb/articles/java-rts.html
The above link seems to be dead.
Thanks,
Ramsundar Kandasamy

Note that if you run JavaRTS on a virtual machine, you may get a lot of jitter from the
host system anyway.
Unless you can guarantee that some CPUs are used only by the Solaris
layer, non real-time threads scheduled by your Host system may delay the real-time operations
within Solaris. This will of course disrupt your real-time Java threads. Even worse, this
may impact the cyclic subsystem, which controls all the fine grain time related operations in
Solaris (this is the low level module we interact with thanks to our cyclic driver to get better
response times).
In fact, even if you dedicate CPUs to Solaris, you also have to be careful with how Solaris
accesses to the 'hardware' time source. Virtualization could create some randomness in the
way Solaris perceives time, disrupting stuff sufficiently to be noticeable within JavaRTS/DTrace.
I highly recommend dual booting instead of using virtualization if you want to evaluate the
determinism of JavaRTS or the high precision of our DTrace based instrumentation tools.
Regards,
Bertrand DELSART
JavaRTS Technical Leader

Can you please provide the .csv files used in Power BI Getting Started Guide

Hi Team,
I am exploring the Power BI app developed by Microsoft on My Windows 8 machine
For that I found the Getting started guide from the below link
http://office.microsoft.com/en-in/excel-help/power-bi-getting-started-guide-HA104103589.aspx?CTT=5&origin=HA102835634
Power Query and Power Pivot are totally new to me and I am trying to learn more on it
While trying to execute the steps given in the starting guide I found that it requires 2 csv files (NYSE Daily 2009 and same for NASDAQ) for mashing up data agaist S&P 500
I tried to get from web, but unfortunately not getting the required data
Can you please provide the test data (the 2 csv files NYSE Daily 2009 and NASDAQ daily 2009) using which I will resume my work in Power BI?
Thanks in advance
Rajendra
InfoCepts( Specialists in Onshore and Offshore BI)
Rajendra Kitukale InfoCepts(Specialists in Onsite and Offshore BI)

Hi, all -- here are links to the CSV files.
NYSE sample data:
http://go.microsoft.com/fwlink/?LinkID=389692
NASDAQ sample data:
http://go.microsoft.com/fwlink/?LinkId=389693
Hope that helps!
Maggie Sparkman

Lightroom Getting Started guide

For those of you who only downloaded LR and did not get the Lightroom Getting Started guide By Adobe with the Boxed version, you can now download aas High or Low Res PDF version of it at the Adobe
Photoshop Lightroom Design Center.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

http://active.tutsplus.com/tutorials/mobile/flash-for-iphone/

Where can I find oracledi-demo-2032252.zip used in the ODI 12c Getting Started Guide?

Where can I find oracledi-demo-2032252.zip used in the ODI 12c Getting Started Guide?
Bye,
Rumburak

http://www.oracle.com/technetwork/middleware/data-integrator/overview/oracledi-demo-2032252.zip

Hyperion Inteligence getting started guide

Hi, I am looking for a users guide called "Hyperion Inteligence getting started guide". Appreciate any one that can tell me where I can download it or if it could be send to me at [email protected] Thanks again.
Edited by: user11178007 on May 22, 2009 10:46 AM

Did you visit this :
http://lmgtfy.com/?q=%22Hyperion+Intelligence+getting+started+guide%22

New DPS Getting Started Guide

We've put together a new Getting Started Guide for Professional and Enterprise publishers. Special thanks to Keith Gilbert.
http://www.adobe.com/content/dam/Adobe/en/products/digital-publishing-suite-family/pdfs/dp s-getting-started-guide-april.pdf

I understand. Will The Single Edition step-by-step publishing guide at least
get updated with current screenshots of Apple¹s redesign of iOS Provisioning
Portal?

CS5 Getting Started Guide - Stuck - Framework not found.

I am using Xcode 3.2.3.
I am on page 26 of the "Getting started with the Adobe Indesign CS5 Products SDK" guide. I follow the instructions up to point 7 on page 27.
Then, when I build the project I get the following error: (http://codepad.org/OcB0myiH)
Ld ../Release/SDK/InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk normal i386
cd /SDK2/build/mac/prj
setenv MACOSX_DEPLOYMENT_TARGET 10.5
/Developer/usr/bin/g++-4.0 -arch i386 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/SDK2/build/mac/prj/../Release/SDK -L/SDK2/build/mac/prj/../release/packagefolder/contents/macos/libs -L../../../build/mac/release/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/../debug/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/../release/packagefolder/contents/macos/libs -L/SDK2/build/mac/prj/libs -F/SDK2/build/mac/prj/../Release/SDK -F../../../build/mac/release/packagefolder/contents/macos -F../../../build/mac/release/packagefolder/contents/Frameworks -F/SDK2/build/mac/prj/../debug/packagefolder/contents/macos -F/SDK2/build/mac/prj/../release/packagefolder/contents/macos -filelist /SDK2/build/mac/prj/build/InDan.build/Default/Release.build/Objects-normal/i386/InDan.sdk .LinkFileList -install_name ./InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk -mmacosx-version-min=10.5 -dead_strip -no_dead_strip_inits_and_terms -Wl,-executable_path -Wl,../../../build/mac/Release/packagefolder/contents/macos/ -framework Carbon -lPublicPlugIn -lPublicPlugIn -lPublicPlugIn -framework InDesignModel -framework InDesignModel -framework InDan.sdk -framework InDan.sdk -single_module -o /SDK2/build/mac/prj/../Release/SDK/InDan.sdk.InDesignPlugin/Versions/A/InDan.sdk
ld: framework not found InDan.sdk
collect2: ld returned 1 exit status
Command /Developer/usr/bin/g++-4.0 failed with exit code 1
I have been trying to solve it for 5 hours now. It can't be that difficult.
Can someone help me out please.
Thanks

That's an odd looking error to see when creating a new project.
Did you create the project with Dolly?
Dolly should have set this up correctly.
Look in your Xcode project.
In the Groups & Files section you should have a file:
????NoStrip.cpp
where the ???? is the short name that you provided in Dolly.
That contains the method DontDeadStrip() that the compiler is looking for.
If it's not in the project, check your source folder and drag the ????NoStrip.cpp
into your project.

Adobe Scout 1.0 - Getting Started Guide.pdf

is this now or will this document be publically available?
if yes, what url?
if no, is there any problem if i include this file in a collection of files linked to an article i've written for adobe.com?

Hi kglad,
The document is already available at the following address: http://www.adobe.com/devnet/flashruntimes/articles/adobe-scout-getting-started.html
Thibault Imbert
Sr. Product Manager | Adobe Scout

Getting started guide

Hi,
I am a Software Engineer with 5+ years of experience in Mainframe Company. I want to learn about SAP and its various solutions and eventually work on it Part time.
Can any of you experts suggest me where I can start with SAP and which solution would suit me and my background. Please also suggest some reading material so that i can get started.
Any suggestions/comments are most welcome.
Thanks,
Sri.

Hi Sirdhar,
As per your profile if you in development the go to abap or if you are in support (technical side) then go in basis/xi etc.
You can do form C-DAC and Siemens institute in India.
Regards,
Anil

IPhone 5c got stuck before it started update to iOS 8 and it goes back and forth between Apple logo screen and blank screen

how do I fix my phone now that it is stuck before the update and only goes back and forth between a blank blue screen and the Apple logo screen. Tried the reset and that didn't work. Please help

Hi Mitchblue,
If your phone is not able to get past the Apple logo, I suggest that you use the following article to help you restore the software in the phone:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Data Integrator Getting Started Guide Page 87

The paragraph Configuration fails during install This failure can also be caused by the cmsCollector not being able to find the BO XI Enterprise SDK.to correct, change the environment variable CE_JARS_DIR to the directory to where the BO XI Enterprise SDK resides. On a windows platform this might be in E:\Program Files\Business Objects\common\3.5\java\lib so alter this to read set CE_JARS_DIR=E:\Program Files\Business Objects\common\3.5\java\lib in the cmsConfig.cmd and retry. 

That's an odd looking error to see when creating a new project.
Did you create the project with Dolly?
Dolly should have set this up correctly.
Look in your Xcode project.
In the Groups & Files section you should have a file:
????NoStrip.cpp
where the ???? is the short name that you provided in Dolly.
That contains the method DontDeadStrip() that the compiler is looking for.
If it's not in the project, check your source folder and drag the ????NoStrip.cpp
into your project.

I got stuck on "Getting Started" guide

Similar Messages

Maybe you are looking for