I got the notice: "could not write application to hard disc" after I downloaded Adobe 14.0 ,  what do I do?

What do I do next?  After a download of Adobe 14.0 the error said "could not write application to hard disc" I never seen this before.

Bygrace which Adobe software or service is your question in reference too?

Similar Messages

  • During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004

    During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

  • HT201210 I tried to update my phone.  It does not work at all now.  I got the message Could not complete request.  The network connection was reset.  I have no phone.  Please help

    I tried to update to the new ios 7 today.  I have no phone now.  I got the message "could not complete request.  The network connection was reset.  What is happening.  What do I do now?

    Apple's servers are probably very busy. You may want to wait for a little while before trying again. 

  • I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

    I am using a portable USB storage drive connected to my laptop.  I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it?  Thank you.

    All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
    Open the Terminal application in the Utilities folder. At the prompt enter:
    sudo rm -rf
    Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

    When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

    What kind of file are you saving, and what sort of clientserver setup do you have?
    If you're using MS Office, it doesn't play nice with OS X Server, particularly with network homes.

  • I get an error message - an I pod has been detected but it could not be identified properly this happened after I downloaded a newer vesrion of I Tunes does anybody have a quick fix??

    I get an error message - an I pod has been detected but it could not be identified properly this happened after I downloaded a newer version of I Tunes does anybody have a quick fix??

    Hi positive29,
    Welcome to the Apple Support Communities!
    I understand situations like yours can be very frustrating. I would recommend the attached article to help you troubleshoot and resolve this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Have a great day,
    Joe

  • "Could not write to configuration file" when config Publisher in admin tab

    Hi guys,
    I have install OBIEE 10.3.3.4 on an RH linux box (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
    When I want to change some parameter in the admin tab of BI publisher (Administrator/Administrator as the login name/pass) and click "Apply",
    I get the error "Could not write to configuration file". After I change the configuration properties to 777 the error is sitll there. And I also try to change the SECURITY MODEL to XDO, but still no use.
    I made a test, for example, when I change something in admin--JDBC--Oracle BIEE and then apply, I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after I reopen the page admin--JDBC--Oracle BIEE. That means I find the correct file and the file access properties is ok.
    For other parameters such as Scheduler Configuration, I got the same error when apply. But the "Test connection" and "Install schema" work.
    Can somebody give me some advise on this ? Thanks
    Scott
    Edited by: Typhoon on Mar 20, 2009 12:59 AM

    I have install the same version(basic install) on another windows box, everything seems good...
    And below is the error log I find in application.log
    09/03/19 13:31:53.956 xmlpserver: Servlet error
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:396)
         at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.handleSubmit(SchedulerConfigPage.java:248)
         at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:166)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

  • Could not write the AIF file (session error)

    I receive the error "Could not write the AIF file (session error)" when trying to record to Sound Track using any of my USB input microphones. Does anybody know how to resolve the problem?
    Also, does anybody have any suggestions about what product to use to produce good multi-track audio files. I am interested in both a hardware and a software solution. It seems that using the standard Apple software that comes on the new G5s does not offer any good solutions.

    Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
    In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

  • Could not find application that created this file error in Acrobat

    What is going on? I have an InDesign file that I want to convert by opening Acrobat and then converting to PDF. I am getting the error "Could not find application that created this file. [file name] Please select a file created by an application that resides on your computer."
    I most often use this functionality when I have multiple files of different origins and need to combine them into one document. Now I'm reading the forums and some are saying this functionality is no longer supported by Acrobat. Pardon my language, but WTF?!?! This is functionality that is commonly used by me and I can only assume other users. Now you have two Adobe products that won't communicate? If so, then all the hoopla stating how great the Adobe suite is should be edited. I have never seen these products take such a step backward!
    Sorry for the rant, but I find this to be ridiculous. What is the workaround, besides converting every document to PDF inside its own software and then combing the PDFs?

    InDesign uses a different method of making PDF files when you use the File->Export option in InDesign (even with Acrobat installed, it uses an internal copy of the PDF Library engine). As such, the two applications do not communicate directly with each other.
    Support for driving the PDF conversion process from within Acrobat has been removed from Acrobat X, beacuse with the new features in InDesign CS4+, Acrobat doesn't have access to the settings it needs to control things such as multimedia, spreads and transitions. ID CS5 divides PDFs into two concepts - "print" and "interactive", neither of which match the presets used by Distiller. Creating PDFs from InDesign files must therefore take place from within InDesign itself.

  • When I try to share my recently completed movie to Media Browser, the following message keeps popping up: "The project could not be prepared for publishing because an error occurred. (-50)". How do I fix it?

    When I completed my iMovie (after hours of work), I can't move it to iDVD or the Media Browser. The following message always pos up: "The project could not be prepared for publishing because an error occurred. (-50)". What is this and how can I fix this? Please help ... I need to get the completed DVD  in the mail now!! Thanks.

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Could not complete the command because the extension could not be loaded

    I was working in 3D with PS CS5 Extended. I went to the Window drop down menu and selected Color. I got the message "Could not complete the command because the extension could not be loaded" and the color pallet and swatches would not appear. I had to click on OK the error message three times to get rid of it as it kept reappearing. The the mini bridge and Brush pallets opened, including Brush Presets tab and Clone Source tab instead of the color pallets. How can I get my color pallets back?
    I am on an iMac Intel core i3 running OS X Lion 10.7.2
    Thanks for any help.
    Thanks,
    Don

    I unstalled Photoshop.  Then I installed on another drive.  External.  It did the same thing!!!!  No mini-bridge, or any extentions loading.  I don't know what is wrong.
    I read something somewhere about a Panels file in photoshop.  So I'm looking there.

  • Could not write value ManageLLRouting

    I encountered the error "could not write value ManageLLRouting to key \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel.". I am already the adminstrator and after many times of uninstall and reinstall of itunes following the proper steps as well as disable my anti-virue (Trend Micro), the problem still persist.
    Please help if you have any ideas as I cannot synchronise itune with my newly bought Ipad air.
    Thanks

    See Troubleshooting issues with iTunes for Windows updates.
    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows but apply it to the branch in question.
    tt2

  • Could not write file .project

    Hi, i need help.
    I have a lot of components in a workspace but when i want to
    make a reference into them flexbuilder send me next error-messaje:
    could not write file d:\......\.project
    i have seen and this file is not an "only read" file, and i
    have permission to write it...
    I have also copy this proyect, and test it in other
    computer...
    Could you help me?
    Thanks in advance

    I have a flex 3 workspace with a lot of components
    (libraries). I need to import one of this components(library 1)
    from another one(library 2), to register a cairmgorn event in
    library 2´s controller.
    When i click with the rigtht button over library 2, and
    select in the menu, properties option, then select proyect
    references and then select library 1, when i press ok, flex send me
    the error, "could not write file /library2.../.project"
    because of that error when i restart my flexbuilder, no any
    reference is in my library 2 component.
    Also, if i try to select propertys, flex library build path,
    and then library path tab, i add proyect and select library 1
    component, flex let me select it, and press ok, but doesn't let me
    use hes propertys and components, like i not doing anything, and
    when i restart my flex builder, this library path has dissapear.
    Thanks in advance.

  • Cannot be synced. The disk could not be read or written to

    I keep getting "+cannot be synced. The disk could not be read or written to+" after it says during the sync process "+importing pictures+".
    I restarted my iPhone and Mac but still the same problem. I deleted all pictures from my iPhone 4, yet the problem remains as I keep getting the same message above.
    Any ideas, what I should do?

    I am having the same issues. Any resolution Apple?
    Mac Pro 10.6.7 IOS 4.3.3

  • "Could not open scratch file because disc is not available" Mac

    I recently changed the Photoshop (CS6) Scratch Disk choice from the default Boot Drive to one of the other internal drives in my MacPro (OS 10.6.8).
    When I restart Photoshop (CS6) I get the message:
    "Could not open scratch file because disc is not available"
    and Photoshop will not launch.
    I then restart Photoshop with "Command - alt - shift" keys held down
    (as per suggestion at <http://forums.adobe.com/message/3937003>)
    and reset the preferences which allows Photoshop to come back.
    (Resetting preferences returned the Boot Drive to scratch disk status.)
    I have another MacPro that - same OS 10.6.8 and Adobe CS6 - and I don't have this scratch disk allocation problem.
    What is going on with the one  MacPro that prevents me from selecting a Photoshop scratch disk other than the boot drive?

    Ignore Ownership worked. Thank you!
    I saw this suggestion on another Discussion thread but wondered if that could be the problem since the non-boot scratch disks used on other computers here do not have this property chosen.
    "Permissions", "Ignore Ownership", and "apply to enclosed items" remain a mystery to me.
    As for Terminal, I've had my hand held a couple of times while I went there and it was not a comforting experience.
    Our work setup depends on complete access by everybody to everything (Read&Write Privileges apply to everyone here). We occasionally swap drives between computers which may cause problems, but why should it and how am I to know. The computer that prompted this discussion had its main hard drive replaced a couple of months ago which may have contributed to the problem.
    Is there a down-side to ignoring ownership on everything and having "read-write" privileges apply to everyone (aside from lax security)?

Maybe you are looking for

  • Urgent:Grand total in hierarchical alv

    I am printing a hierarchical alv with subtotals. I want to print the grand total for the whole numeric columns ... Can anyone explain me how i can do this. Thanks and regards, Subhakar

  • How do I access a USB server on a "different network segment"?

    I have tried posting this question in the Server community but with no response, however I believe the solution will be achived through Terminal and I believe there will be those versed in the use of Terminal here, so here goes. I have a USB Server w

  • I got an error while updating my iphone4gs to ios5.0.1 and now the iphone is on its previous page when it was on box?

    i was updating my iphone4 to the latest version but the error occured while updating the phone and than my phone got frozen with the screen of itunes and usb cable but as i connect it to the computer, its not shown in itunes.same screen is shown plea

  • Creation of Manual Orders in PPDS in /sapapo/rrp4

    Hi All, We are using PPDS for production planning. In the process of generating a plan in short term horizon, after executing the scheduling heuristic, user wants flexibility of manually creating some orders. We are using /sapapo/rrp4, where user can

  • Portmon to work on 64 bit OS

    I need to scan ports in my PC and have a list of processes listening on them. I could understand that Portman can be a good choice, but it does not work on Windows 8.1 because it does not support 64 bit OSs. How come it is not possible to use it on 6