I had an abrupt powerfailure on my MAcbook. Power went of, the adapter light went of and since than nothing. Can't power up. I suspect a fasilure of the power supply unit. Some advice is welcome
Working hsppy on my macbook suddenly all power fell away. The adapter light went of and since than i have not been able to restart my macbook. I suspect a failure in the powersupply. Heard a little sound like blowing a fuse. Any suggestions?
I suggest you make an appointment at the genius bar at an Apple store and take your Macbook in for a comprehensive diagnosis. This service is free. If repairs are needed you will be given an estimate.
How to find a genius bar:
http://www.apple.com/retail/geniusbar/
Similar Messages
-
hey plz help me out!! i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me
iSight troubleshooting
http://support.apple.com/kb/HT2090 -
i had to put new HD in macbook, backed up with ext HD with time machine, what doi do now? possible to partition so i have not all the old 'junk' on clean drive?
Do you have the OS 10.6 disk? You can run Disk Utility from that disk and format and partition the new drive.
If you don't have the disk you can buy it from Apple for $20.00
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Post back when you are ready to proceed. -
I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?
Reload older versions from iTunes on a computer, or buy a newer device.
(73016) -
I've recently formatted my 10.7.4 mountain lion MacBook from 2007. The hard drive is wiped and I think it deleted to OS too. How do I put the OS back on it?
Wiping the drive does indeed delete the OS. Try this -
Boot to the Lion (10.7.4 is Lion not Mountain Lion) recovery partition by restarting the computer and holding down the command and R keys during startup.
If this works, reinstall from here. You must be connected to the Internet to do this.
If this does not work, possibly because you reformatted the recovery partition as well, you will need to reinstall from your original disks (assuming it came with 10.6 or earlier.) Boot to the disk by holding down the C key during startup and run the installer.
Best of luck. -
my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanksthanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.
-
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com -
I own iwork '09 for my Imac I and just bought a Macbook Air, can I have have the suite on both computers, and if so how do I do this with no CD drive on the MBAir
Welcome to Apple Support Communities
https://discussions.apple.com/message/18269126#18269126 -
there was an error importing some photos from my iphone, and since then I can not close the program ... it gives the mesage 'please wait until import is conclued'...but nothing is being tranfered. Any help ? Iphoto version 9.5.1
Force Quit the application from the Apple menu.
-
Please help! My Macbook Pro will not turn on. The green light is faded and flickers. I also live in Jordan, and we don't have a service center. Help!!
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
Best. -
Well it won't turn on despite the indicator lights all being green showing it has power!
Troubleshooting a MacBook, MacBook Air or MacBook Pro that won't turn on
-
i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.
Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
I've had a network extender for 2 years and since August I can't get a GPS signal
I have had a network extender for over 2 years and have had no problems with it. Since August, I have had nothing but trouble. The GPS signal went out and I went through all of the Verizon troubleshooting tips and nothing worked. They sent me a new one and it has worked for about 2 weeks however now I have the same exact problem, the GPS is red and I haven't had a GPS signal for 2 weeks now. What is going on? How is it possible that after over 2 years of having no issues, we can't get a GPS signal?
I spoke with another Verizon tech rep and he was going to open a network trouble ticket however first he needed to gather some information. He directed me to this site http://8x8.com/Resources/Tools/VoIPTest.aspx
to get info on the speak of my computer and IP connection however when I began the test, there was an error and it couldn't measure my VOIP connection. The Verizon rep said that there isn't software in the network extender and that it's based off the VOIP. So he suggested I call my internet provider and tell them that I'm trying to use a VOIP and for some reason it's not working. He suggested I tell them I'm trying to use Vonage and not Verizon though. Anyway, I'm going to call Comcast tomorrow and provide them the information that I got off the http://8x8.com/Resources/Tools/VoIPTest.aspx site. Not sure if that will help you but I will keep you posted as to what Comcast tells me. -
It's been going on recently and even though I've tried to do an Software Update and click "sleep" before closing the lid, nothing seems to work...
Has anyone else had this problem and would have recommendations on how to fix it?
Thank you!I think the behaviour of closing the lid has changed between "before Lion" and "since Lion" - which OS version do you have? There is a free utility called InsomniaX that help control this behaviour - see http://semaja2.net/archives/206 for more info.
Good luck and let us know how it turns out.
-Bob
Maybe you are looking for
-
Client certificate authentication with custom authorization for J2EE roles?
We have a Java application deployed on Sun Java Web Server 7.0u2 where we would like to secure it with client certificates, and a custom mapping of subject DNs onto J2EE roles (e.g., "visitor", "registered-user", "admin"). If we our web.xml includes:
-
Been trying to install itunes 10.6 for 2 days. I download fresh copies each time and get the following message: "There is a problem with this windows installer package. A program run as part of the setup did not finish as expected."
-
CS5 Crashes during Merge to HDR on Windows XP
HI, CS5 crashes when I try to create an HDR from 3 RAW (CR2) files (select 3 files in MiniBridge, then select "Merger to HDR Pro" from tools ICON). It goes through the steps of building a composite image in CS5. I see a lot of entries being inserte
-
Using my iMac as a second display for my Macbook
Hello. I was just wondering if it is possible to use my G5 (early 2008) iMac as a secondary display for my Macbook (late 2009) using a mini Dvi cable? Can anybody help?
-
How can i create a page like this
Hi I have a client who liked this page effect the gallery section looks like the mac doc is there a similar plug in i can purchase and integrate in one of the html pages? http://www.belloproductions.com/index-3.html